The Integrated Gas/Steam Nozzle With Steam Cooling: Part II — Design Considerations

1984 ◽  
Author(s):  
Ivan G. Rice
Keyword(s):  
Shock Wave ◽  
Film Cooling ◽  
Fat Body ◽  
Suction Side ◽  
Body Type ◽  
Trailing Edge ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Wave Development ◽  
Gas Nozzle

The integration of multiple steam nozzles with the first-stage annular-gas nozzle to form a binary-flow system in a reheat-gas turbine is presented whereby steam is first used as an internal vane coolant before being expanded and accelerated for work extraction. Steam nozzles are located in “fat-body” type vanes. Trailing-edge impingement followed by reverse-serpentine-flow cooling takes place. Internal trailing-edge-steam nozzles produce either diffusion or shock-wave boundary-layer disturbance inside the trailing edge to enhance heat transfer. Externally, steam blanketing reduces nozzle-profile loss and improves film cooling effectiveness by reducing the surface viscosity and secondly by controlling suction-side aft-shock-wave development. A new vane shape coupled with a gas-turning-combustor system is suggested to improve vane-film cooling effectiveness further.

The Integrated Gas/Steam Nozzle With Steam Cooling: Part I — Application

1984 ◽  
Author(s):  
Ivan G. Rice
Keyword(s):  
Shock Wave ◽  
Film Cooling ◽  
Fat Body ◽  
Suction Side ◽  
Body Type ◽  
Trailing Edge ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Wave Development ◽  
Gas Nozzle

The integration of multiple steam nozzles with the first-stage annular-gas nozzle to form a binary-flow system in a reheat-gas turbine is presented whereby steam is first used as an internal vane coolant before being expanded and accelerated for work extraction. Steam nozzles are located in “fat-body” type vanes. Trailing-edge impingement followed by reverse-serpentine-flow cooling takes place. Internal trailing-edge-steam nozzles produce either diffusion or shock-wave boundary-layer disturbance inside the trailing edge to enhance heat transfer. Externally, steam blanketing reduces nozzle-profile loss and improves film cooling effectiveness by reducing the surface viscosity and secondly by controlling suction-side aft-shock-wave development. A new vane shape coupled with a gas-turning-combustor system is suggested to improve vane-film-cooling effectiveness further.

Numerical Investigations of Wake and Shock Wave Effects on Film Cooling Performance in a Transonic Turbine Stage: Part 1 — Methodology Development and Qualification Over Stationary Stators and Rotors

2013 ◽  
Author(s):  
Huazhao Xu ◽  
Jianhua Wang ◽  
Ting Wang
Keyword(s):  
Experimental Data ◽  
Mach Number ◽  
Film Cooling ◽  
Suction Side ◽  
Trailing Edge ◽  
Cooling Effectiveness ◽  
Cooling Performance ◽  
Film Cooling Effectiveness ◽  
Numerical Investigations ◽  
Blowing Ratio

To understand the unsteady shock wave and wake effects on the film cooling performance over a transonic 3-D rotating stage, a series of numerical investigations have been conducted and are presented in this two-part paper. Part 1 is focused on the development of the computational model and methodology of the system setup and model qualification; Part 2 is to investigate the unsteady effects of shock waves and wakes on film cooling performance in a transonic rotating stage. In Part 1, the film cooling experimental conditions (non-rotating) and test sections of Kopper et. al. and Hunter are selected for model qualification. The numerical computation is carried out by the commercial software Ansys/Fluent using the pressure based compressible flow governing equations. The effects of four turbulence models are carefully compared with the experimental data. The Realizable k-ε turbulence model is found to match the experimental data better than the other models and is thus used for the rest of the study, including Part 2. The results show that 1) the weak shock emanating from the neighboring stator’s trailing edge results in a temperature rise and a reduction of film cooling effectiveness on the suction side near the trailing edge, 2) cooling ejection from the trailing edge reduces the shock strength in the stator passage, 3) an increase in Mach number from 0.84 to 1.50 can reduce the total pressure losses of fluid flow near the end-walls, 4) the film cooling effectiveness increases with increasing blowing ratio and becomes more even on the stator with a higher blowing ratio, and 5) an increase in Mach number from 0.84 to 1.50 gives rise to a higher cooling effectiveness in the region from the cooling holes to 80% of the chord length of the stator on the pressure side, but becomes lower after this up to the trailing edge. However, on the stator’s suction side, higher Mach number results in a lower cooling effectiveness region around the film holes from 30% to 55% of the chord length, but cooling effectiveness increases downstream.

Multi-Row Film Cooling Performances of a High Lift Blade and Vane

2012 ◽  
Author(s):  
S. Naik ◽  
J. Krueckels ◽  
M. Gritsch ◽  
M. Schnieder
Keyword(s):  
Film Cooling ◽  
Guide Vane ◽  
Suction Side ◽  
Operating Conditions ◽  
Pressure Side ◽  
Trailing Edge ◽  
Cooling Effectiveness ◽  
High Lift ◽  
Film Cooling Effectiveness ◽  
Film Cooling Holes

This paper investigates the aerodynamic and film cooling effectiveness characteristics of a first stage turbine high lift guide vane and its corresponding downstream blade. The vane and blade geometrical profiles and operating conditions are representative of that normally found in a heavy-duty gas turbine. Both the vane and the blade airfoils consist of multi-row film cooling holes located at various axial positions along the airfoil chord. The film cooling holes are geometrically three-dimensional in shape and depending on the location on the airfoil; they can be either symmetrically fan shaped or non-symmetrically fan shaped. Additionally the film cooling holes can be either compounded or in-line with the external flow direction. Numerical studies and experimental investigations in a linear cascade have been conducted at vane and blade exit isentropic Mach number of 0.8. The influence of the coolant flow ejected from the film cooling holes has been investigated for both the vane and the blade profiles. For the nozzle guide vane, the measured film cooling effectiveness compared well with the predictions, especially on the pressure side. The suction side film cooling effectiveness, which consisted of two pre-throat film rows, proved very effective up-to the suction side trailing edge. For the blade, there was a reasonable comparison between the measured and predicted film cooling effectiveness. Again the blade pre-throat fan shaped cooling holes proved very effective up-to the suction side trailing edge. For the vane, the impact of varying the blowing ratios showed a strong variation in the film cooling effectiveness on the pressure side. However, on the blade, the effect of varying the blowing ratio had a greater impact on the suction side film effectiveness compared to the pressure side.

Effect of a Cutback Squealer and Cavity Depth on Film-Cooling Effectiveness on a Gas Turbine Blade Tip

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Shantanu Mhetras ◽  
Diganta Narzary ◽  
Zhihong Gao ◽  
Je-Chin Han
Keyword(s):  
Film Cooling ◽  
Suction Side ◽  
Pressure Side ◽  
Trailing Edge ◽  
Cavity Depth ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Blowing Ratio ◽  
Blade Tip ◽  
Film Cooling Holes

Film-cooling effectiveness from shaped holes on the near tip pressure side and cylindrical holes on the squealer cavity floor is investigated. The pressure side squealer rim wall is cut near the trailing edge to allow the accumulated coolant in the cavity to escape and cool the tip trailing edge. Effects of varying blowing ratios and squealer cavity depth are also examined on film-cooling effectiveness. The film-cooling effectiveness distributions are measured on the blade tip, near tip pressure side and the inner pressure side and suction side rim walls using pressure sensitive paint technique. The internal coolant-supply passages of the squealer tipped blade are modeled similar to those in the GE-E3 rotor blade with two separate serpentine loops supplying coolant to the film-cooling holes. Two rows of cylindrical film-cooling holes are arranged offset to the suction side profile and along the camber line on the tip. Another row of shaped film-cooling holes is arranged along the pressure side just below the tip. The average blowing ratio of the cooling gas is controlled to be 0.5, 1.0, 1.5, and 2.0. A five-bladed linear cascade in a blow down facility with a tip gap clearance of 1.5% is used to perform the experiments. The free-stream Reynolds number, based on the axial chord length and the exit velocity, was 1,480,000 and the inlet and exit Mach numbers were 0.23 and 0.65, respectively. A blowing ratio of 1.0 is found to give best results on the pressure side, whereas the tip surfaces forming the squealer cavity give best results for M=2. Results show high film-cooling effectiveness magnitudes near the trailing edge of the blade tip due to coolant accumulation from upstream holes in the tip cavity. A squealer depth with a recess of 2.1mm causes the average effectiveness magnitudes to decrease slightly as compared to a squealer depth of 4.2mm.

A Numerical Investigation of Stator-Rotor Interaction Effects on Flow Field and Film Cooling Effectiveness in a 3D Transonic Turbine Stage With Highly Twisted Rotors

2013 ◽  
Author(s):  
Huazhao Xu ◽  
Jianhua Wang ◽  
Ting Wang
Keyword(s):  
Shock Waves ◽  
Film Cooling ◽  
Static Pressure ◽  
Pressure Fluctuations ◽  
Suction Side ◽  
Turbine Stage ◽  
Trailing Edge ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Cooling Air

To reduce aerodynamic losses and optimize turbine blade cooling designs, a comprehensive understanding of rotor-stator interaction effects on the blade aerodynamics and film cooling performance is essential. This paper focuses on the numerical analysis of the interactions between shock waves and unsteady wakes and their effects on cooling effectiveness of a highly twisted rotor within a transonic turbine stage. The parameters of the turbine stage are from the Pratt & Whitney Energy Efficient Engine (E3) program. The Realizable k-ε turbulence model was selected as the suitable turbulence model by our previous study. The investigation is conducted first by analyzing mean static pressure and the Root Mean Square (RMS) of the static pressure, followed by a detailed study of the flow field in the rotor passage at blowing ratios (Br) of 0.5, 1.0 and 1.5. Effects of the complicated interactions among shock waves, trailing edge wake shedding, and blockage of moving rotors are separated and identified individually through shock strength, vortices, and entropy production. The results show that: 1) For the stator, the shock waves emanating from the trailing edge of the neighboring stator impinging on the later part of the stator’s suction side, creating static pressure fluctuations as large as 20%. 2) For the rotor, the variation of static pressure is synchronized with the rotor passing frequency, but out of phase between the suction and pressure sides. 3) A high entropy region generated by the wake flow from the upstream trailing edge in the rotor passage intensifies and moves towards the rotor hub during the rotor passing periods. 4) Most of the cooling air injected from the rotor leading edge bends towards the suction side, and the cooling air injected from the pressure side turns towards the rotor hub. 5) An increase in the blowing ratio from Br = 0.5 to Br = 1.5 does not affect the pressure fluctuations, but does significantly increase film cooling effectiveness on the rotor pressure side. 6) The mean static pressure on the suction side of the twist blade is lower than a straight blade, indicating the benefit of producing larger torque by using twist rotors.

Multirow Film Cooling Performances of a High Lift Blade and Vane

2013 ◽  
Vol 136 (5) ◽  
Author(s):  
S. Naik ◽  
J. Krueckels ◽  
M. Gritsch ◽  
M. Schnieder
Keyword(s):  
Film Cooling ◽  
Guide Vane ◽  
Suction Side ◽  
Operating Conditions ◽  
Pressure Side ◽  
Trailing Edge ◽  
Cooling Effectiveness ◽  
High Lift ◽  
Film Cooling Effectiveness ◽  
Film Cooling Holes

This paper investigates the aerodynamic and film cooling effectiveness characteristics of a first stage turbine high lift guide vane and its corresponding downstream blade. The vane and blade geometrical profiles and operating conditions are representative of that normally found in a heavy-duty gas turbine. Both the vane and the blade airfoils consist of multirow film cooling holes located at various axial positions along the airfoil chord. The film cooling holes are geometrically three-dimensional in shape and depending on the location on the airfoil, they can be either symmetrically fan shaped or nonsymmetrically fan shaped. Additionally the film cooling holes can be either compounded or in-line with the external flow direction. Numerical studies and experimental investigations in a linear cascade have been conducted at vane and blade exit isentropic Mach number of 0.8. The influence of the coolant flow ejected from the film cooling holes has been investigated for both the vane and the blade profiles. For the nozzle guide vane, the measured film cooling effectiveness compared well with the predictions, especially on the pressure side. The suction side film cooling effectiveness, which consisted of two prethroat film rows, proved very effective up to the suction side trailing edge. For the blade, there was a reasonable comparison between the measured and predicted film cooling effectiveness. Again the blade prethroat fan shaped cooling holes proved very effective up to the suction side trailing edge. For the vane, the impact of varying the blowing ratios showed a strong variation in the film cooling effectiveness on the pressure side. However, on the blade, the effect of varying the blowing ratio had a greater impact on the suction side film effectiveness compared to the pressure side.

Turbine Blade Platform Film Cooling With Simulated Swirl Purge Flow and Slashface Leakage Conditions

2016 ◽  
Author(s):  
Andrew F. Chen ◽  
Chao-Cheng Shiau ◽  
Je-Chin Han
Keyword(s):  
Turbine Blade ◽  
Film Cooling ◽  
Leading Edge ◽  
Suction Side ◽  
Leakage Flow ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Purge Flow ◽  
Endwall Film Cooling ◽  
Film Cooling Holes

The combined effects of inlet purge flow and the slashface leakage flow on the film cooling effectiveness of a turbine blade platform were studied using the pressure sensitive paint (PSP) technique. Detailed film cooling effectiveness distributions on the endwall were obtained and analyzed. The inlet purge flow was generated by a row of equally-spaced cylindrical injection holes inside a single-tooth generic stator-rotor seal. In addition to the traditional 90 degree (radial outward) injection for the inlet purge flow, injection at a 45 degree angle was adopted to create a circumferential/azimuthal velocity component toward the suction side of the blades, which created a swirl ratio (SR) of 0.6. Discrete cylindrical film cooling holes were arranged to achieve an improved coverage on the endwall. Backward injection was attempted by placing backward injection holes near the pressure side leading edge portion. Slashface leakage flow was simulated by equally-spaced cylindrical injection holes inside a slot. Experiments were done in a five-blade linear cascade with an average turbulence intensity of 10.5%. The inlet and exit Mach numbers were 0.26 and 0.43, respectively. The inlet and exit mainstream Reynolds numbers based on the axial chord length of the blade were 475,000 and 720,000, respectively. The coolant-to-mainstream mass flow ratios (MFR) were varied from 0.5%, 0.75%, to 1% for the inlet purge flow. For the endwall film cooling holes and slashface leakage flow, blowing ratios (M) of 0.5, 1.0, and 1.5 were examined. Coolant-to-mainstream density ratios (DR) that range from 1.0 (close to low temperature experiments) to 1.5 (intermediate DR) and 2.0 (close to engine conditions) were also examined. The results provide the gas turbine engine designers a better insight into improved film cooling hole configurations as well as various parametric effects on endwall film cooling when the inlet (swirl) purge flow and slashface leakage flow were incorporated.

Experimental Investigation of Turbine Phantom Cooling on Suction Side With Combustor-Turbine Leakage Gap Flow and Endwall Film Cooling

2012 ◽  
Author(s):  
Yang Zhang ◽  
Xin Yuan
Keyword(s):  
Film Cooling ◽  
Incidence Angle ◽  
Suction Side ◽  
Leakage Flow ◽  
Airfoil Surface ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Blowing Ratio ◽  
Coolant Injection ◽  
Passage Vortex

The film cooling injection on Hp turbine component surface is strongly affected by the complex flow structure in the nozzle guide vane or rotor blade passages. The action of passage vortex near endwall surface could dominate the film cooling effectiveness distribution on the component surfaces. The film cooling injections from endwall and airfoil surface are mixed with the passage vortex. Considering a small part of the coolant injection from endwall will move towards the airfoil suction side and then cover some area, the interaction between the coolants injected from endwall and airfoil surface is worth investigating. Though the temperature of coolant injection from endwall increases after the mixing process in the main flow, the injections moving from endwall to airfoil suction side still have the potential of second order cooling. This part of the coolant is called “Phantom cooling flow” in the paper. A typical scale-up model of GE-E3 Hp turbine NGV is used in the experiment to investigate the cooling performance of injection from endwall. Instead of the endwall itself, the film cooling effectiveness is measured on the airfoil suction side. This paper is focused on the combustor-turbine interface gap leakage flow and the coolant from fan-shaped holes moving from endwall to airfoil suction side. The coolant flow is injected at a 30deg angle to the endwall surface both from a slot and four rows of fan-shaped holes. The film cooling holes on the endwall and the leakage flow are used simultaneously. The blowing ratio and incidence angle are selected to be the parameters in the paper. The experiment is completed with the blowing ratio changing from M = 0.7 to M = 1.3 and the incidence angle varying from −10deg to +10deg, with inlet Reynolds numbers of Re = 3.5×105 and an inlet Mach number of Ma = 0.1.

Sign in / Sign up

Export Citation Format

Share Document