A Hybrid Biomimetic Genetic Algorithm Using a Local Fuzzy Simplex Search

2010 ◽  
Author(s):  
George S. Ladkany ◽  
Mohamed B. Trabia
Keyword(s):  
Genetic Algorithm ◽  
Genetic Algorithms ◽  
Rate Of Convergence ◽  
Genetic Information ◽  
Hybrid Genetic Algorithm ◽  
Global Optimum ◽  
Benchmark Problems ◽  
Simplex Search ◽  
Successful Approach ◽  
Comparison Of The Results

This paper presents a hybrid genetic algorithm that expands upon the previously successful approach of twinkling genetic algorithm (TGA) by incorporating a highly efficient local fuzzy-simplex search within the algorithm. The TGA was in principle a bio-mimetic algorithm that introduced a controlled deviation from a typical GA method, by not requiring that every genevariable of an offspring be the result of a crossover. Instead, twinkling allowed the genetic information of the randomly chosen gene locations to be directly passed on from one parent, which was shown to increase the likelihood of survival of a successful gene value within the offspring, rather than requiring it to be blended. The twinkling genetic algorithms proved highly effective at locating exact global optimum with a competitive rate of convergence for a wide variety of benchmark problems. In this work, it is proposed to couple the TGA with a fuzzy simplex local search to increase the rate of convergence of the algorithm. The proposed algorithm is tested using common mathematical and engineering design benchmark problems. Comparison of the results of this algorithm with earlier algorithms is presented.

Ordered Incremental Multi-Objective Problem Solving Based on Genetic Algorithms

2012 ◽  
pp. 72-98
Author(s):  
Wenting Mo ◽  
Sheng-Uei Guan ◽  
Sadasivan Puthusserypady
Keyword(s):  
Genetic Algorithm ◽  
Genetic Algorithms ◽  
Problem Solving ◽  
Benchmark Problems ◽  
Multiple Objective ◽  
Nsga Ii ◽  
Incremental Approach ◽  
Strength Pareto Evolutionary Algorithm ◽  
Conflicting Objectives ◽  
Open Question

Many Multiple Objective Genetic Algorithms (MOGAs) have been designed to solve problems with multiple conflicting objectives. Incremental approach can be used to enhance the performance of various MOGAs, which was developed to evolve each objective incrementally. For example, by applying the incremental approach to normal MOGA, the obtained Incremental Multiple Objective Genetic Algorithm (IMOGA) outperforms state-of-the-art MOGAs, including Non-dominated Sorting Genetic Algorithm-II (NSGA-II), Strength Pareto Evolutionary Algorithm (SPEA) and Pareto Archived Evolution Strategy (PAES). However, there is still an open question: how to decide the order of the objectives handled by incremental algorithms? Due to their incremental nature, it is found that the ordering of objectives would influence the performance of these algorithms. In this paper, the ordering issue is investigated based on IMOGA, resulting in a novel objective ordering approach. The experimental results on benchmark problems showed that the proposed approach can help IMOGA reach its potential best performance.

Hookes-Jeeves-Based Variant of Memetic Algorithm

2016 ◽  
pp. 450-475
Author(s):  
Dipti Singh ◽  
Kusum Deep
Keyword(s):  
Genetic Algorithms ◽  
Memetic Algorithm ◽  
Optimization Problems ◽  
Optimal Solution ◽  
Memetic Algorithms ◽  
Global Optimum ◽  
Benchmark Problems ◽  
New Variant ◽  
Optimum Solution ◽  
Global Optimum Solution

Due to their wide applicability and easy implementation, Genetic algorithms (GAs) are preferred to solve many optimization problems over other techniques. When a local search (LS) has been included in Genetic algorithms, it is known as Memetic algorithms. In this chapter, a new variant of single-meme Memetic Algorithm is proposed to improve the efficiency of GA. Though GAs are efficient at finding the global optimum solution of nonlinear optimization problems but usually converge slow and sometimes arrive at premature convergence. On the other hand, LS algorithms are fast but are poor global searchers. To exploit the good qualities of both techniques, they are combined in a way that maximum benefits of both the approaches are reaped. It lets the population of individuals evolve using GA and then applies LS to get the optimal solution. To validate our claims, it is tested on five benchmark problems of dimension 10, 30 and 50 and a comparison between GA and MA has been made.

Towards a Hybrid Solver: Integration of a Genetic Algorithm Within “DSIDES”

2002 ◽  
Author(s):  
Shuiwei Xie ◽  
Warren F. Smith
Keyword(s):  
Genetic Algorithm ◽  
Genetic Algorithms ◽  
Linear Programming ◽  
Decision Support ◽  
Hybrid Genetic Algorithm ◽  
Systems Design ◽  
Nonlinear Problems ◽  
The Body ◽  
Hybrid Solver ◽  
Decision Based Design

In contributing to the body of knowledge for decision-based design, the work reported in this paper has involved steps towards building a hybrid genetic algorithm to address systems design. Highlighted is a work in progress at the Australian Defence Force Academy (ADFA). A genetic algorithm (GA) is proposed to deal with discrete aspects of a design model (e.g., allocation of space to function) and a sequential linear programming (SLP) method for the continuous aspects (e.g., sizing). Our historical Decision Based Design (DBD) tool has been the code DSIDES (Decision Support In the Design of Engineering Systems). The original functionality of DSIDES was to solve linear and non-linear goal programming styled problems using linear programming (LP) and sequential (adaptive) linear programming (SLP/ALP). We seek to enhance DSIDES’s solver capability by the addition of genetic algorithms. We will also develop the appropriate tools to deal with the decomposition and synthesis implied. The foundational paradigm for DSIDES, which remains unchanged, is the Decision Support Problem Technique (DSPT). Through introducing genetic algorithms as solvers in DSIDES, the intention is to improve the likelihood of finding the global minimum (for the formulated model) as well as the ability of dealing more effectively with nonlinear problems which have discrete variables, undifferentiable objective functions or undifferentiable constraints. Using some numerical examples and a practical ship design case study, the proposed GA based method is demonstrated to be better in maintaining diversity of populations, preventing premature convergence, compared with other similar GAs. It also has similar effectiveness in finding the solutions as the original ALP DSIDES solver.

scholarly journals A novel pseudoderivative-based mutation operator for real-coded adaptive genetic algorithms

F1000Research ◽  
2013 ◽  
Vol 2 ◽  
pp. 139
Author(s):  
Maxinder S Kanwal ◽  
Avinash S Ramesh ◽  
Lauren A Huang
Keyword(s):  
Genetic Algorithm ◽  
Genetic Algorithms ◽  
Mutation Rate ◽  
Optimal Solution ◽  
Global Optimum ◽  
Optimization Techniques ◽  
Adaptive Mutation ◽  
Local Optima ◽  
3 Dimensional ◽  
Successive Generations

Recent development of large databases, especially those in genetics and proteomics, is pushing the development of novel computational algorithms that implement rapid and accurate search strategies. One successful approach has been to use artificial intelligence and methods, including pattern recognition (e.g. neural networks) and optimization techniques (e.g. genetic algorithms). The focus of this paper is on optimizing the design of genetic algorithms by using an adaptive mutation rate that is derived from comparing the fitness values of successive generations. We propose a novel pseudoderivative-based mutation rate operator designed to allow a genetic algorithm to escape local optima and successfully continue to the global optimum. Once proven successful, this algorithm can be implemented to solve real problems in neurology and bioinformatics. As a first step towards this goal, we tested our algorithm on two 3-dimensional surfaces with multiple local optima, but only one global optimum, as well as on the N-queens problem, an applied problem in which the function that maps the curve is implicit. For all tests, the adaptive mutation rate allowed the genetic algorithm to find the global optimal solution, performing significantly better than other search methods, including genetic algorithms that implement fixed mutation rates.

scholarly journals Optimal source localization problem based on TOA measurements

2017 ◽  
Vol 14 (1) ◽  
pp. 161-176
Author(s):  
Maja Rosic ◽  
Mirjana Simic ◽  
Predrag Pejovic ◽  
Milan Bjelica
Keyword(s):  
Genetic Algorithm ◽  
Lower Bound ◽  
Signal To Noise Ratio ◽  
Hybrid Genetic Algorithm ◽  
Optimal Solution ◽  
Nonlinear Least Squares ◽  
Global Optimum ◽  
Time Of Arrival ◽  
Newton Raphson ◽  
Optimum Solution

Determining an optimal emitting source location based on the time of arrival (TOA) measurements is one of the important problems in Wireless Sensor Networks (WSNs). The nonlinear least-squares (NLS) estimation technique is employed to obtain the location of an emitting source. This optimization problem has been formulated by the minimization of the sum of squared residuals between estimated and measured data as the objective function. This paper presents a hybridization of Genetic Algorithm (GA) for the determination of the global optimum solution with the local search Newton-Raphson (NR) method. The corresponding Cramer-Rao lower bound (CRLB) on the localization errors is derived, which gives a lower bound on the variance of any unbiased estimator. Simulation results under different signal-to-noise-ratio (SNR) conditions show that the proposed hybrid Genetic Algorithm-Newton-Raphson (GA-NR) improves the accuracy and efficiency of the optimal solution compared to the regular GA.

scholarly journals Using computation to enhance diagnosis and therapy: a novel mutation operator for real-coded adaptive genetic algorithms

F1000Research ◽  
2013 ◽  
Vol 2 ◽  
pp. 139
Author(s):  
Maxinder S Kanwal ◽  
Avinash S Ramesh ◽  
Lauren A Huang
Keyword(s):  
Genetic Algorithm ◽  
Genetic Algorithms ◽  
Mutation Rate ◽  
Novel Mutation ◽  
Fitness Function ◽  
Genetic Disorders ◽  
Optimal Solution ◽  
Global Optimum ◽  
Adaptive Mutation ◽  
Local Optima

The fields of molecular biology and neurobiology have advanced rapidly over the last two decades. These advances have resulted in the development of large proteomic and genetic databases that need to be searched for the prediction, early detection and treatment of neuropathologies and other genetic disorders. This need, in turn, has pushed the development of novel computational algorithms that are critical for searching genetic databases. One successful approach has been to use artificial intelligence and pattern recognition algorithms, such as neural networks and optimization algorithms (e.g. genetic algorithms). The focus of this paper is on optimizing the design of genetic algorithms by using an adaptive mutation rate based on the fitness function of passing generations. We propose a novel pseudo-derivative based mutation rate operator designed to allow a genetic algorithm to escape local optima and successfully continue to the global optimum. Once proven successful, this algorithm can be implemented to solve real problems in neurology and bioinformatics. As a first step towards this goal, we tested our algorithm on two 3-dimensional surfaces with multiple local optima, but only one global optimum, as well as on the N-queens problem, an applied problem in which the function that maps the curve is implicit. For all tests, the adaptive mutation rate allowed the genetic algorithm to find the global optimal solution, performing significantly better than other search methods, including genetic algorithms that implement fixed mutation rates.

scholarly journals Extended Hybrid Genetic Algorithm for Solving Job Shop Scheduling Problem

2021 ◽  
Vol 10 (02) ◽  
pp. 017-020
Author(s):  
Sumaia E. Eshim ◽  
Mohammed M. Hamed
Keyword(s):  
Genetic Algorithm ◽  
Hybrid Algorithm ◽  
Job Shop ◽  
Job Shop Scheduling ◽  
Hybrid Genetic Algorithm ◽  
Benchmark Problems ◽  
Scheduling Problem ◽  
Job Shop Scheduling Problem ◽  
Solution Quality ◽  
Shop Scheduling

In this paper, a hybrid genetic algorithm (HGA) to solve the job shop scheduling problem (JSSP) to minimize the makespan is presented. In the HGA, heuristic rules are integrated with genetic algorithm (GA) to improve the solution quality. The purpose of this research is to investigate from the convergence of a hybrid algorithm in achieving a good solution for new benchmark problems with different sizes. The results are compared with other approaches. Computational results show that a hybrid algorithm is capable to achieve good solution for different size problems.

Finding Diversity in Mechanisms Using a Hybrid Genetic Algorithm

2000 ◽  
Author(s):  
Robert A. O’Neil ◽  
Louis J. Everett
Keyword(s):  
Genetic Algorithm ◽  
Hybrid Genetic Algorithm ◽  
Solution Space ◽  
Global Optimum ◽  
Small Error ◽  
Test Function ◽  
Modified Genetic Algorithm ◽  
Path Synthesis ◽  
Alternative Solutions ◽  
Better Than

Abstract The path synthesis problem for mechanical linkages still presents problems for engineers, although it has been examined for more than two centuries. This research approached the design problem as one of creating a characteristic test function to compare a synthesized output path with a desired output path, and finding a set of linkages that reduce the corresponding error. Since the solution space of this approach is very large with typically a generous number of local minima, it may be possible to find several linkages that each produce a small error. This research investigated the ability to use a modified genetic algorithm to search for a global minima and simultaneously identify several linkage designs that are “almost” as good as the global optimum. Having alternative solutions will allow designers to choose a mechanism that best fits criteria other than path error. The results from using the method on a subclass of linkage problems demonstrate that solutions can be found that “fit” better than those found in the literature. The results also show that a diverse family of acceptable designs can be obtained and that this family includes both “well known” designs and heretofore unknown solutions.

RDF Query Path Optimization Using Hybrid Genetic Algorithms

2022 ◽  
Vol 12 (1) ◽  
pp. 1-16
Author(s):  
Qazi Mudassar Ilyas ◽  
Muneer Ahmad ◽  
Sonia Rauf ◽  
Danish Irfan
Keyword(s):  
Genetic Algorithm ◽  
Genetic Algorithms ◽  
Execution Time ◽  
Optimization Problems ◽  
Hybrid Genetic Algorithm ◽  
Solution Space ◽  
Path Optimization ◽  
Initial Population ◽  
Description Framework ◽  
The Cost

Resource Description Framework (RDF) inherently supports data mergers from various resources into a single federated graph that can become very large even for an application of modest size. This results in severe performance degradation in the execution of RDF queries. As every RDF query essentially traverses a graph to find the output of the Query, an efficient path traversal reduces the execution time of RDF queries. Hence, query path optimization is required to reduce the execution time as well as the cost of a query. Query path optimization is an NP-hard problem that cannot be solved in polynomial time. Genetic algorithms have proven to be very useful in optimization problems. We propose a hybrid genetic algorithm for query path optimization. The proposed algorithm selects an initial population using iterative improvement thus reducing the initial solution space for the genetic algorithm. The proposed algorithm makes significant improvements in the overall performance. We show that the overall number of joins for complex queries is reduced considerably, resulting in reduced cost.

Optimisation of Assembly Line Balancing Type-E with Resource Constraints Using NSGA-II

2016 ◽  
Vol 701 ◽  
pp. 195-199 ◽  
Author(s):  
Masitah Jusop ◽  
Mohd Fadzil Faisae Ab Rashid
Keyword(s):  
Genetic Algorithm ◽  
Assembly Line ◽  
Resource Constraints ◽  
Hybrid Genetic Algorithm ◽  
Assembly Line Balancing ◽  
Search Space ◽  
Line Balancing ◽  
Benchmark Problems ◽  
Nsga Ii ◽  
Multi Objective Genetic Algorithm

Assembly line balancing of Type-E problem (ALB-E) is an attempt to assign the tasks to the various workstations along the line so that the precedence relations are satisfied and some performance measures are optimised. A majority of the recent studies in ALB-E assume that any assembly task can be assigned to any workstation. This assumption lead to higher usage of resource required in assembly line. This research studies assembly line balancing of Type-E problem with resource constraint (ALBE-RC) for a single-model. In this work, three objective functions are considered, i.e. minimise number of workstation, cycle time and number of resources. In this paper, an Elitist Non-dominated Sorting Genetic Algorithm (NSGA-II) has been proposed to optimise the problem. Six benchmark problems have been used to test the optimisation algorithm and the results are compared to multi-objective genetic algorithm (MOGA) and hybrid genetic algorithm (HGA). From the computational test, it was found NSGA-II has the ability to explore search space, has better accuracy of solution and also has a uniformly spaced solution. In future, a research to improve the solution accuracy is proposed to enhance the performance of the algorithm.

Sign in / Sign up

Export Citation Format

Share Document