Nondegenerate Continuation Problems for the Excitation Response of Nonlinear Beam Structures

Author(s):  
Mehdi Saghafi ◽  
Harry Dankowicz

This paper investigates the dynamics of a slender beam subjected to transverse periodic excitation. Of particular interest is the formulation of nondegenerate continuation problems that may be analyzed numerically, in order to explore the parameter-dependence of the steady-state excitation response, while accounting for geometric nonlinearities. Several candidate formulations are presented, including finite-difference (FD) and finite-element (FE) discretizations of the governing scalar, integro-partial differential boundary-value problem (BVP), as well as of a corresponding first-order-in-space, mixed formulation. As an example, a periodic BVP — obtained from a Galerkin-type, FE discretization with continuously differentiable, piecewise-polynomial trial and test functions, and an elimination of Lagrange multipliers associated with spatial boundary conditions — is analyzed to determine the beam response via numerical continuation using a MATLAB-based software suite. In the case of an FE discretization of the mixed formulation with continuous, piecewise-polynomial trial and test functions, it is shown that the choice of spatial boundary conditions may render the resultant index-1, differential-algebraic BVP equivariant under a symmetry group of state-space translations. The paper demonstrates several methods for breaking the equivariance in order to obtain a nondegenerate continuation problem, including a projection onto a symmetry-reduced state space or the introduction of an artificial continuation parameter. As is further demonstrated, an orthogonal collocation discretization in time of the BVP gives rise to ghost solutions, corresponding to arbitrary drift in the algebraic variables. This singularity is resolved by using an asymmetric discretization in time.

2017 ◽  
Vol 72 (5) ◽  
pp. 397-400 ◽  
Author(s):  
Chein-Shan Liu ◽  
Botong Li

AbstractFor the problem of a nonlinear beam equation under nonlinear boundary conditions of moments, a fast iterative method is developed by transforming the ordinary differential equation into an integral one. The sinusoidal functions are used subtly as test functions as well as the bases of numerical solution in the calculation. Due to the orthogonality of the sinusoidal functions, the expansion coefficients of numerical solution in closed form can be found easily. Hence, the iterative scheme converges very fast to find numerical solutions with high accuracy.


1999 ◽  
Vol 09 (01) ◽  
pp. 139-160 ◽  
Author(s):  
EVARISTE SANCHEZ-PALENCIA

We consider the asymptotic behavior as the thickness 2ε tends to zero of thin elastic shells which are not geometrically rigid for the kinematic boundary conditions (non-inhibited shells). It is known that the limit displacement belongs to the subspace G of inextensional displacements. We write the corresponding mixed formulation with a Lagrange multiplier. It is then proved that the corresponding problem (equations and boundary conditions) is not elliptic, whatever the type of the surface. Examples are given where the interior smoothness of the data does not imply interior smoothness of the solutions. The topology of the space M of the multipliers is weaker than the L2 topology. In some cases it is even weaker than that of distributions (sensitivity phenomenon). As a consequence, the convergence of the problem in mixed formulation for thickness 2ε as ε tends to zero only holds in very poor topologies, implying non-uniformity with respect to ε of the finite element mixed formulations.


2019 ◽  
Vol 141 (12) ◽  
Author(s):  
Matthias Haeringer ◽  
Wolfgang Polifke

Abstract Thermo-acoustic eigenmodes of annular or can-annular combustion chambers, which typically feature a discrete rotational symmetry, may be computed in an efficient manner by utilizing the Bloch-wave theory. Unfortunately, the application of the Bloch-wave theory to combustion dynamics has hitherto been limited to the frequency domain. In this study, we present a time-domain formulation of Bloch boundary conditions (BBC), which allows to employ them in time domain simulations, e.g., computational fluid dynamics (CFD) simulations. The BBCs are expressed as acoustic scattering matrices and translated to complex-valued state-space systems. In a hybrid approach an unsteady, compressible CFD simulation of the burner-flame zone is coupled via characteristic-based state-space boundary conditions to a reduced order model of the combustor acoustics that includes BBCs. The acoustic model with BBC accounts for cross-can acoustic coupling and the discrete rotational symmetry of the configuration, while the CFD simulation accounts for the nonlinear flow–flame acoustic interactions. This approach makes it possible to model limit cycle oscillations of (can-)annular combustors at drastically reduced computational cost compared to CFD simulations of the full configuration and without the limitations of weakly nonlinear approaches that utilize a flame describing function. In this study, the suggested approach is applied to a generic multican combustor. Results agree well with a fully compressible CFD simulation of the complete configuration.


1993 ◽  
Vol 80 (6) ◽  
pp. 1331-1337
Author(s):  
Wilford N. Hansen ◽  
Yurij I. Kharkats ◽  
Jens Ulstrup

Author(s):  
Saeed Sarkheil ◽  
Mahmud S Foumani ◽  
Hossein M Navazi

Based on the Sanders thin shell theory, this paper presents an exact solution for the vibration of circular cylindrical shell made of two different materials. The shell is sub-divided into two segments and the state-space technique is employed to derive the homogenous differential equations. Then continuity conditions are applied where the material of the cylindrical shell changes. Shells with various combinations of end boundary conditions are analyzed by the proposed method. Finally, solving different examples, the effect of geometric parameters as well as BCs on the vibration of the bi-material shell is studied.


2010 ◽  
Vol 667 ◽  
pp. 586-606 ◽  
Author(s):  
ISABEL MERCADER ◽  
ORIOL BATISTE ◽  
ARANTXA ALONSO ◽  
EDGAR KNOBLOCH

Binary fluid mixtures with a negative separation ratio heated from below exhibit steady spatially localized states called convectons for supercritical Rayleigh numbers. Numerical continuation is used to compute such states in the presence of both Neumann boundary conditions and no-slip no-flux boundary conditions in the horizontal. In addition to the previously identified convectons, new states referred to as anticonvectons with a void in the centre of the domain, and wall-attached convectons attached to one or other wall are identified. Bound states of convectons and anticonvectons called multiconvecton states are also computed. All these states are located in the so-called snaking or pinning region in the Rayleigh number and may be stable. The results are compared with existing results with periodic boundary conditions.


2019 ◽  
Vol 11 (08) ◽  
pp. 1950073 ◽  
Author(s):  
H. Bisheh ◽  
A. Alibeigloo ◽  
M. Safarpour ◽  
A. R. Rahimi

Free vibrational and bending behavior of functionally graded graphene platelet reinforced composite (FG-GPLRC) circular and annular plate with various boundary conditions is studied using the differential quadrature method (DQM). The weight fraction differs gradually across the thickness direction. Effective elasticity modulus of the nanocomposite has been estimated by the modified Halpin–Tsai model. Using equations of motion in the framework of the elasticity theory and constitutive relation, the state-space first-order differential equation along the thickness direction is derived. A semi-analytical solution is carried out based on the application of DQM along the radial direction and the state-space technique across the thickness of the plate. The present approach is validated by comparing the numerical results with those reported in the literature. Effect of graphene platelets (GPLs) weight fraction, different GPL distribution patterns, thickness-to-radius and outer-to-inner radius ratios and edge boundary conditions on the static and vibrational behavior of GPLs reinforced composite circular/annular plates are examined. The results implied that GPLs can improve the composite strength against different loading and GPLs could have an extraordinary reinforcing influence on the static and vibrational behavior of the circular/annular plates.


1994 ◽  
Vol 116 (1) ◽  
pp. 129-136 ◽  
Author(s):  
A. H. Nayfeh ◽  
S. A. Nayfeh

We use several methods to study the nonlinear modes of one-dimensional continuous systems with cubic inertia and geometric nonlinearities. Invariant manifold and perturbation methods applied to the discretized system and the method of multiple scales applied to the partial-differential equation and boundary conditions are discussed and their equivalence is demonstrated. The method of multiple scales is then applied directly to the partial-differential equation and boundary conditions governing several nonlinear beam problems.


Sign in / Sign up

Export Citation Format

Share Document