Fall Initiation Criteria for Three-Dimensional Multi-Segmental Model of Biped Robot

2014 ◽  
Author(s):  
Chang B. Joo ◽  
Joo H. Kim
Keyword(s):  
Optimization Problems ◽  
Center Of Pressure ◽  
Dimensional Space ◽  
Center Of Mass ◽  
Reaction Force ◽  
Three Dimensional ◽  
Biped Robot ◽  
3D Space ◽  
Force Direction ◽  
Balancing Conditions

A biped mechanism can maintain its balance by redirecting the ground reaction force direction and changing the center of pressure location. In this paper, how the variable inertia in a multibody dynamic model is related to those efforts is investigated and fall initiation criteria in three dimensional space, a balanced state manifold is constructed by using a 3D multi-segmental model. The balanced state domain is constructed by iteratively solving nonlinear constrained optimization problems and finding the velocity extrema at given center of mass positions subjected to certain balancing conditions. The constructed balanced state domain of a multi-segmental model can be used as fall initiation criteria in 3D space and it demonstrates the better balancing maintenance capability of 3D multi-segmental model than the 3D linear inverted pendulum mode.

scholarly journals Kinematic and Kinetic Analysis of Horticultural Activities for Postural Control and Balance Training

HortScience ◽  
2018 ◽  
Vol 53 (10) ◽  
pp. 1541-1552
Author(s):  
A-Young Lee ◽  
Sin-Ae Park ◽  
Young-Jin Moon ◽  
Ki-Cheol Son
Keyword(s):  
Postural Control ◽  
Muscle Activation ◽  
Center Of Pressure ◽  
Center Of Mass ◽  
Reaction Force ◽  
Three Dimensional ◽  
Balance Training ◽  
Lower Limbs ◽  
Kinetic Characteristics ◽  
3D Motion Analysis

The objective of this study was to analyze the kinematic and kinetic characteristics of eight horticultural activities (HAs): digging, raking, sowing seeds, transplanting plants, near-distance weeding, far-distance weeding, low-height harvesting, and high-height harvesting. Twenty-four male university students (average age, 23.4 ± 2.9 years) participated in this study. Balance and postural stability factors [e.g., center of mass (CoM), ground reaction force (GRF), and center of pressure (CoP)] and postural control strategy factors (e.g., joint angles, joint moment, and muscle activation of the trunk and lower limbs) were assessed using a three-dimensional (3D) motion analysis system, force platform, and surface electromyography. A total of eight HAs were distinguished in three motions: stepping, squatting, and stooping. In performing the eight HAs, CoM shifting occurred and balance of the subjects became unstable. These forced compensatory motor strategies to maintain balance by exertion of GRF from the two feet, movement of the CoP, and a combination of musculoskeletal system exercises of the lower limbs and trunk occurred. The kinematic and kinetic characteristics of lower limb motions were significantly different across the HAs (P = 0.05). The kinematic and kinetic characteristics of HAs were similar to those of the functional tasks during balance improvement training motions and activities of daily living. The current study provides useful reference data for developing a horticultural therapy program for balance improvement in patients who need physical rehabilitation.

Dynamics of a composite system in a point source-induced space–time

2021 ◽  
pp. 2150144
Author(s):  
Abdullah Guvendi
Keyword(s):  
Point Source ◽  
Composite System ◽  
Dimensional Space ◽  
Energy Levels ◽  
Center Of Mass ◽  
Three Dimensional ◽  
Space Time ◽  
Spin Coupling ◽  
Quantum Oscillator ◽  
Dimensional Space Time

We investigate the dynamics of a composite system ([Formula: see text]) consisting of an interacting fermion–antifermion pair in the three-dimensional space–time background generated by a static point source. By considering the interaction between the particles as Dirac oscillator coupling, we analyze the effects of space–time topology on the energy of such a [Formula: see text]. To achieve this, we solve the corresponding form of a two-body Dirac equation (fully-covariant) by assuming the center-of-mass of the particles is at rest and locates at the origin of the spatial geometry. Under this assumption, we arrive at a nonperturbative energy spectrum for the system in question. This spectrum includes spin coupling and depends on the angular deficit parameter [Formula: see text] of the geometric background. This provides a suitable basis to determine the effects of the geometric background on the energy of the [Formula: see text] under consideration. Our results show that such a [Formula: see text] behaves like a single quantum oscillator. Then, we analyze the alterations in the energy levels and discuss the limits of the obtained results. We show that the effects of the geometric background on each energy level are not same and there can be degeneracy in the energy levels for small values of the [Formula: see text].

scholarly journals Gutenberg Gait Database, a ground reaction force database of level overground walking in healthy individuals

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Fabian Horst ◽  
Djordje Slijepcevic ◽  
Marvin Simak ◽  
Wolfgang I. Schöllhorn
Keyword(s):  
Ground Reaction Force ◽  
Center Of Pressure ◽  
Reaction Force ◽  
Three Dimensional ◽  
Human Gait ◽  
Healthy Individuals ◽  
Overground Walking ◽  
Gait Patterns ◽  
Specific Factors ◽  
Gait Database

AbstractThe Gutenberg Gait Database comprises data of 350 healthy individuals recorded in our laboratory over the past seven years. The database contains ground reaction force (GRF) and center of pressure (COP) data of two consecutive steps measured - by two force plates embedded in the ground - during level overground walking at self-selected walking speed. The database includes participants of varying ages, from 11 to 64 years. For each participant, up to eight gait analysis sessions were recorded, with each session comprising at least eight gait trials. The database provides unprocessed (raw) and processed (ready-to-use) data, including three-dimensional GRF and two-dimensional COP signals during the stance phase. These data records offer new possibilities for future studies on human gait, e.g., the application as a reference set for the analysis of pathological gait patterns, or for automatic classification using machine learning. In the future, the database will be expanded continuously to obtain an even larger and well-balanced database with respect to age, sex, and other gait-specific factors.

scholarly journals Active foot placement control ensures stable gait: Effect of constraints on foot placement and ankle moments

PLoS ONE ◽  
2020 ◽  
Vol 15 (12) ◽  
pp. e0242215
Author(s):  
A. M. van Leeuwen ◽  
J. H. van Dieën ◽  
A. Daffertshofer ◽  
S. M. Bruijn
Keyword(s):  
Steady State ◽  
Center Of Pressure ◽  
Center Of Mass ◽  
Reaction Force ◽  
Stride Frequency ◽  
Tight Control ◽  
Foot Placement ◽  
Ankle Moment ◽  
Reaction Forces ◽  
Moment Control

Step-by-step foot placement control, relative to the center of mass (CoM) kinematic state, is generally considered a dominant mechanism for maintenance of gait stability. By adequate (mediolateral) positioning of the center of pressure with respect to the CoM, the ground reaction force generates a moment that prevents falling. In healthy individuals, foot placement is complemented mainly by ankle moment control ensuring stability. To evaluate possible compensatory relationships between step-by-step foot placement and complementary ankle moments, we investigated the degree of (active) foot placement control during steady-state walking, and under either foot placement-, or ankle moment constraints. Thirty healthy participants walked on a treadmill, while full-body kinematics, ground reaction forces and EMG activities were recorded. As a replication of earlier findings, we first showed step-by-step foot placement is associated with preceding CoM state and hip ab-/adductor activity during steady-state walking. Tight control of foot placement appears to be important at normal walking speed because there was a limited change in the degree of foot placement control despite the presence of a foot placement constraint. At slow speed, the degree of foot placement control decreased substantially, suggesting that tight control of foot placement is less essential when walking slowly. Step-by-step foot placement control was not tightened to compensate for constrained ankle moments. Instead compensation was achieved through increases in step width and stride frequency.

scholarly journals Dynamic Balancing Responses in Unilateral Transtibial Amputees Following Outward-Directed Perturbations During Slow Treadmill Walking Differ Considerably for Amputated and Non-Amputated Side

2021 ◽  
Author(s):  
Andrej Olenšek ◽  
Matjaž Zadravec ◽  
Helena Burger ◽  
Zlatko Matjačić
Keyword(s):  
Stance Phase ◽  
Center Of Pressure ◽  
Center Of Mass ◽  
Reaction Force ◽  
Dynamic Balancing ◽  
Transtibial Amputation ◽  
Control Subjects ◽  
Foot Strike ◽  
Transtibial Amputees ◽  
Proprioceptive Function

Abstract BackgroundDue to disrupted motor and proprioceptive function lower limb amputation imposes considerable challenges associated with balance and greatly increases risk of falling in case of perturbations during walking. The aim of this study was to investigate dynamic balancing responses in unilateral transtibial amputees when they were subjected to perturbing pushes to the pelvis in outward direction at the time of foot strike on non-amputated and amputated side during slow walking.MethodsFourteen subjects with unilateral transtibial amputation and nine control subjects participated in the study. They were subjected to perturbations that were delivered to the pelvis at the time of foot strike of either the left or right leg. We recorded trajectories of center of pressure and center of mass, durations of in-stance and stepping periods as well as ground reaction forces. Statistical analysis was performed to determine significant differences in dynamic balancing responses between control subjects and subjects with amputation when subjected to outward-directed perturbation upon entering stance phases with non-amputated or amputated side.ResultsWhen outward-directed perturbations were delivered at the time of foot strike of the non-amputated leg, subjects with amputation were able to modulate center of pressure and ground reaction force similarly as control subjects which indicates application of in-stance balancing strategies. On the other hand, there was a complete lack of in-stance response when perturbations were delivered when the amputated leg entered the stance phase. Subjects with amputations instead used the stepping strategy and adjusted placement of the non-amputated leg in the ensuing stance phase to make a cross-step. Such response resulted in significantly higher displacement of center of mass. ConclusionsResults of this study suggest that due to the absence of the COP modulation mechanism, which is normally supplied by ankle motor function, people with unilateral transtibial amputation are compelled to choose the stepping strategy over in-stance strategy when they are subjected to outward-directed perturbation on the amputated side. However, the stepping response is less efficient than in-stance response. To improve their balancing responses to unexpected balance perturbation people fitted with passive transtibial prostheses should undergo perturbation-based balance training during clinical rehabilitation.

scholarly journals Numerical Study of the Zero Velocity Surface and Transfer Trajectory of a Circular Restricted Five-Body Problem

2018 ◽  
Vol 2018 ◽  
pp. 1-10
Author(s):  
R. F. Wang ◽  
F. B. Gao
Keyword(s):  
Body Problem ◽  
Numerical Study ◽  
Dimensional Space ◽  
Center Of Mass ◽  
Three Dimensional ◽  
Regular Tetrahedron ◽  
Transfer Trajectory ◽  
Zero Velocity ◽  
Zero Velocity Surfaces ◽  
Zero Velocity Surface

We focus on a type of circular restricted five-body problem in which four primaries with equal masses form a regular tetrahedron configuration and circulate uniformly around the center of mass of the system. The fifth particle, which can be regarded as a small celestial body or probe, obeys the law of gravity determined by the four primaries. The geometric configuration of zero-velocity surfaces of the fifth particle in the three-dimensional space is numerically simulated and addressed. Furthermore, a transfer trajectory of the fifth particle skimming over four primaries then is designed.

scholarly journals An Engineering Model of Human Balance Control—Part I: Biomechanical Model

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Joseph E. Barton ◽  
Anindo Roy ◽  
John D. Sorkin ◽  
Mark W. Rogers ◽  
Richard Macko
Keyword(s):  
Inverse Dynamics ◽  
Balance Control ◽  
Dimensional Space ◽  
Young Subject ◽  
Reaction Force ◽  
Three Dimensional ◽  
Balance Training ◽  
Biomechanical Model ◽  
Measurement Tool ◽  
Inverse Dynamics Analysis

We developed a balance measurement tool (the balanced reach test (BRT)) to assess standing balance while reaching and pointing to a target moving in three-dimensional space according to a sum-of-sines function. We also developed a three-dimensional, 13-segment biomechanical model to analyze performance in this task. Using kinematic and ground reaction force (GRF) data from the BRT, we performed an inverse dynamics analysis to compute the forces and torques applied at each of the joints during the course of a 90 s test. We also performed spectral analyses of each joint's force activations. We found that the joints act in a different but highly coordinated manner to accomplish the tracking task—with individual joints responding congruently to different portions of the target disk's frequency spectrum. The test and the model also identified clear differences between a young healthy subject (YHS), an older high fall risk (HFR) subject before participating in a balance training intervention; and in the older subject's performance after training (which improved to the point that his performance approached that of the young subject). This is the first phase of an effort to model the balance control system with sufficient physiological detail and complexity to accurately simulate the multisegmental control of balance during functional reach across the spectra of aging, medical, and neurological conditions that affect performance. Such a model would provide insight into the function and interaction of the biomechanical and neurophysiological elements making up this system; and system adaptations to changes in these elements' performance and capabilities.

scholarly journals A data set with kinematic and ground reaction forces of human balance

2017 ◽  
Author(s):  
Damiana A dos Santos ◽  
Claudiane A Fukuchi ◽  
Reginaldo K Fukuchi ◽  
Marcos Duarte
Keyword(s):  
Center Of Pressure ◽  
Reaction Force ◽  
Kinematic Model ◽  
Three Dimensional ◽  
Force Platform ◽  
Whole Body ◽  
Ground Reaction Forces ◽  
Data Set ◽  
Public Data ◽  
Reaction Forces

This article describes a public data set with the three-dimensional kinematics of the whole body and the ground reaction forces (with a dual force platform setup) of subjects standing still for 60 s in different conditions, in which the vision and the standing surface were manipulated. Twenty-seven young subjects and 22 old subjects were evaluated. The data set comprises a file with metadata plus 1,813 files with the ground reaction force (GRF) and kinematics data for the 49 subjects (three files for each of the 12 trials plus one file for each subject). The file with metadata has information about each subject’s sociocultural, demographic, and health characteristics. The files with the GRF have the data from each force platform and from the resultant GRF (including the center of pressure data). The files with the kinematics have the three-dimensional position of the 42 markers used for the kinematic model of the whole body and the 73 calculated angles. In this text, we illustrate how to access, analyze, and visualize the data set. All the data is available at Figshare (DOI: 10.6084/m9.figshare.4525082 ), and a companion Jupyter Notebook (available at https://github.com/demotu/datasets ) presents the programming code to generate analyses and other examples.

scholarly journals Active foot placement control ensures stable gait: Effect of constraints on foot placement and ankle moments

2020 ◽  
Author(s):  
A.M. van Leeuwen ◽  
J.H. van Dieën ◽  
A. Daffertshofer ◽  
S.M. Bruijn
Keyword(s):  
Steady State ◽  
Center Of Pressure ◽  
Center Of Mass ◽  
Reaction Force ◽  
Stride Frequency ◽  
Tight Control ◽  
Foot Placement ◽  
Ankle Moment ◽  
Reaction Forces ◽  
Moment Control

AbstractStep-by-step foot placement control, relative to the center of mass (CoM) kinematic state, is generally considered a dominant mechanism for maintenance of gait stability. By adequate (mediolateral) positioning of the center of pressure with respect to the CoM, the ground reaction force generates a moment that prevents falling. In healthy individuals, foot placement is complemented mainly by ankle moment control ensuring stability. To evaluate possible compensatory relationships between step-by-step foot placement and complementary ankle moments, we investigated the degree of (active) foot placement control during steady-state walking, and under either foot placement-, or ankle moment constraints. Thirty healthy participants walked on a treadmill, while full-body kinematics, ground reaction forces and EMG activities were recorded. As a replication of earlier findings, we first showed step-by-step foot placement is associated with preceding CoM state and hip ab-/adductor activity during steady-state walking. Tight control of foot placement appears to be important at normal walking speed because there was a limited change in the degree of foot placement control despite the presence of a foot placement constraint. At slow speed, the degree of foot placement control decreased substantially, suggesting that tight control of foot placement is less essential when walking slowly. Step-by-step foot placement control was not tightened to compensate for constrained ankle moments. Instead compensation was achieved through increases in step width and stride frequency.

scholarly journals A data set with kinematic and ground reaction forces of human balance

2017 ◽  
Author(s):  
Damiana A dos Santos ◽  
Claudiane A Fukuchi ◽  
Reginaldo K Fukuchi ◽  
Marcos Duarte
Keyword(s):  
Center Of Pressure ◽  
Reaction Force ◽  
Kinematic Model ◽  
Three Dimensional ◽  
Force Platform ◽  
Whole Body ◽  
Ground Reaction Forces ◽  
Data Set ◽  
Public Data ◽  
Reaction Forces

This article describes a public data set with the three-dimensional kinematics of the whole body and the ground reaction forces (with a dual force platform setup) of subjects standing still for 60 s in different conditions, in which the vision and the standing surface were manipulated. Twenty-seven young subjects and 22 old subjects were evaluated. The data set comprises a file with metadata plus 1,813 files with the ground reaction force (GRF) and kinematics data for the 49 subjects (three files for each of the 12 trials plus one file for each subject). The file with metadata has information about each subject’s sociocultural, demographic, and health characteristics. The files with the GRF have the data from each force platform and from the resultant GRF (including the center of pressure data). The files with the kinematics have the three-dimensional position of the 42 markers used for the kinematic model of the whole body and the 73 calculated angles. In this text, we illustrate how to access, analyze, and visualize the data set. All the data is available at Figshare (DOI: 10.6084/m9.figshare.4525082 ), and a companion Jupyter Notebook (available at https://github.com/demotu/datasets ) presents the programming code to generate analyses and other examples.

Sign in / Sign up

Export Citation Format

Share Document