Architecture Optmization of a 3-DOF Parallel Mechanism

1998 ◽  
Author(s):  
J. A. Carretero ◽  
R. P. Podhorodeski ◽  
M. Nahon
Keyword(s):  
Parallel Mechanism ◽  
Architectural Design ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Design Parameters ◽  
Objective Functions ◽  
Constraint Equations ◽  
Three Degree Of Freedom ◽  
Architecture Optimization ◽  
Three Degrees Of Freedom

Abstract This paper presents a study of the architecture optimization of a three-degree-of-freedom parallel mechanism intended for use as a telescope mirror focussing device. The construction of the mechanism is first described. Since the mechanism has only three degrees of freedom, constraint equations describing the inter-relationship between the six Cartesian coordinates are given. These constraints allow us to define the parasitic motions and, if incorporated into the kinematics model, a constrained Jacobian matrix can be obtained. This Jacobian matrix is then used to define a dexterity measure. The parasitic motions and dexterity are then used as objective functions for the optimizations routines and from which the optimal architectural design parameters are obtained.

Kinematic Analysis of a Three-DOF Parallel Mechanism for Telescope Applications

1997 ◽  
Author(s):  
J. A. Carretero ◽  
M. Nahon ◽  
B. Buckham ◽  
C. M. Gosselin
Keyword(s):  
Kinematic Analysis ◽  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Constraint Equations ◽  
Forward And Inverse Kinematics ◽  
Position And Orientation ◽  
Three Degree Of Freedom ◽  
Three Degrees Of Freedom

Abstract This paper presents a kinematic analysis of a three-degree-of-freedom parallel mechanism intended for use as a telescope mirror focussing device. The construction of the mechanism is first described and its forward and inverse kinematics solutions are derived. Because the mechanism has only three degrees of freedom, constraint equations must be generated to describe the inter-relationship between the six Cartesian coordinates which describe the position and orientation of the moving platform. Once these constraints are incorporated into the kinematics model, a constrained Jacobian matrix is obtained. The stiffness and dexterity properties of the mechanism are then determined based on this Jacobian matrix. The mechanism is shown to exhibit desirable properties in the region of its workspace of interest in the telescope focussing application.

scholarly journals Input Rationality Analysis of Three Degree of freedom Parallel Mechanism with Limbs of Embedding Structures

2019 ◽  
Vol 10 (2) ◽  
pp. 343-353
Author(s):  
Gaowei Yang ◽  
Jianjun Zhang ◽  
Weimin Li ◽  
Kaicheng Qi
Keyword(s):  
Parallel Mechanism ◽  
Group Selection ◽  
Degrees Of Freedom ◽  
Selection Rule ◽  
Direct Application ◽  
Input Selection ◽  
Selection Theory ◽  
Coupling Relationship ◽  
Three Degree Of Freedom ◽  
Three Degrees Of Freedom

Abstract. Three degrees of freedom (3-DoF) parallel mechanism (PM) with limbs of embedding structures is a kind of PM with a coupling relationship between limbs. In order to obtain a more desirable motion, the analysis of its actuated pairs shall be conducted. However, the fact that the existence of limbs coupling results in non-unique limb group, this mechanism has multiple limb groups. In this regard, the traditional input selection theory is not suitable for direct application in the input rationality analysis. Aiming to avoid this, a general extended input selection theory and limb group selection rule are proposed. The former tackles the traditional input selection theory which is not suitable for analyzing the input of PM with limbs of embedding structures since it does not take the influence of group into consideration, whereas the latter makes the calculation of the former easier. Based on the extended input selection theory and the limb group selection rule, the input and configuration of the 3-DoF PM with limbs of embedding structures are improved.

Continuous motion of a novel 3-CRC symmetrical parallel mechanism

2015 ◽  
Vol 230 (3) ◽  
pp. 392-405 ◽  
Author(s):  
Ziming Chen ◽  
Wen-ao Cao ◽  
Huafeng Ding ◽  
Zhen Huang
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Parallel Mechanisms ◽  
Numerical Examples ◽  
Parasitic Motion ◽  
Continuous Rotation ◽  
Moving Platform ◽  
Motion Characteristics ◽  
Three Degrees Of Freedom

Parallel mechanisms (PMs) with three degrees of freedom (DOFs) have been studied extensively, especially the PMs with two rotational and one translational DOFs (2R1T PMs). One major problem of the 2R1T PMs is the inherent parasitic motion. In this paper, a novel 2R1T symmetrical parallel mechanism with no parasitic motion is proposed and studied. The moving platform and the base of this mechanism are mirror symmetric with respect to a mid-plane. This moving platform can realize continuous rotation about any axis or any point on the mid-plane and can have continuous translation along the normal line of the mid-plane. The constraint and motion characteristics of this mechanism are analyzed. The kinematics solutions and the Jacobian matrix are derived. The singularities of this PM are discussed. In the end, several numerical examples are given to show the continuous rotations and continuous translations of this PM. This kind of PMs has outstanding advantages of easy path planning and controlling.

Kinematics Analysis of a 3-RRR Spherical Parallel Mechanism with Coaxial Input Shafts

2013 ◽  
Vol 404 ◽  
pp. 237-243
Author(s):  
Yu Lei Hou ◽  
Xin Zhe Hu ◽  
Da Xing Zeng
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Inverse Solution ◽  
Kinematics Analysis ◽  
Motion Feature ◽  
Displacement Problem ◽  
Spherical Parallel Mechanism ◽  
Three Degrees Of Freedom

As an important mechanism with special and extensive application, the three degrees of freedom spherical parallel mechanism is always a research hot in the mechanical fields. In this paper, the feature of the 3-RRR spherical parallel mechanism with coaxial input shafts is introduced, and its motion feature is analyzed based on the screw theory. The mobility of the spherical parallel mechanism is calculated by using the Modified Kutzbach-Grübler criterion, and the inverse displacement problem of the mechanism is solved. Then the expression of the Jacobian matrix is deduced based on the kinematics equation and its inverse solution. The contents of this paper should be useful for the further application of the spherical parallel mechanism.

Kinematic Analysis and Optimization of a New Three Degree-of-Freedom Spatial Parallel Manipulator

1999 ◽  
Vol 122 (1) ◽  
pp. 17-24 ◽  
Author(s):  
J. A. Carretero ◽  
R. P. Podhorodeski ◽  
M. A. Nahon ◽  
C. M. Gosselin
Keyword(s):  
Parallel Mechanism ◽  
Degree Of Freedom ◽  
Constraint Equations ◽  
Parasitic Motion ◽  
Design Variables ◽  
Common Plane ◽  
Prismatic Joints ◽  
Definition Of ◽  
Three Degree Of Freedom ◽  
Architecture Optimization

A study of the kinematic characteristics of a three degree-of-freedom (dof) parallel mechanism is presented. The architecture of the mechanism is comprised of a mobile platform attached to a base through three identical prismatic-revolute-spherical jointed serial linkages. The prismatic joints are considered to be actuated. These prismatic actuators lie on a common plane and have radial directions of action. The mechanism’s inverse displacement solution is obtained. Since the mechanism has only 3 dof, constraint equations describing the inter-relationship between the six motion coordinates are derived. These constraints allow the definition of parasitic motions, i.e., motions in the three unspecified motion coordinates. Architecture optimization of the device is undertaken demonstrating that specific values of design variables allow minimization of parasitic motion. [S1050-0472(00)00101-X]

Design of a Teaching Robot with Three Degrees of Freedom

2012 ◽  
Vol 619 ◽  
pp. 325-328
Author(s):  
You Jun Huang ◽  
Ze Lun Li ◽  
Zhi Cheng Huang
Keyword(s):  
Degrees Of Freedom ◽  
Low Cost ◽  
Degree Of Freedom ◽  
Good Repeatability ◽  
Main Components ◽  
Opening And Closing ◽  
Three Degree Of Freedom ◽  
Three Degrees Of Freedom ◽  
Application Prospects

A teaching robot with three degree of freedom is designed. The three degrees of freedom are: waist rotation, lifting and stretching of the arm and opening and closing of the gripper. The designs of the main components are: a mobile chassis, parallel rails, horizontal rails and manipulator. The teaching robot designed has the features of low cost, easy to regulation, good repeatability and it has good promotion and application prospects in the field of teaching.

Design of a Four Legged Parallel Mechanism to Improve the Dexterity of Walking Robot

2009 ◽  
Author(s):  
ChiHyo Kim ◽  
KunWoo Park ◽  
TaeSung Kim ◽  
MinKi Lee
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Topology Design ◽  
Condition Numbers ◽  
Walking Robots ◽  
Rough Terrain ◽  
Parallel Mechanisms ◽  
Walking Robot ◽  
Intermediate Mechanism

This paper designs a four legged parallel mechanism to improve the dexterity of three layered parallel walking robot. Topology design is conducted for a leg mechanism composed of four legs, base and ground, which constitute a redundant parallel mechanism. This mechanism is subdivided into four sub-mechanism composed of three legs. A motor vector is adopted to determine the 6×8 Jacobian of the redundant parallel mechanism and the 6×6 Jacobian of the sub-mechanisms, respectively. The condition number of the Jacobian matrix is used as an index to measure a dexterity. We analyze the condition numbers of the Jacobian over the positional and orientational walking space. The analytical results show that a sub-mechanism has lots of singularities within workspace but they are removed by a redundant parallel mechanism improving the dexterity. This paper presents a parallel typed walking robot to enlarge walking space and stability region. Seven types of three layered walking robots are designed by inserting an intermediate mechanism between the upper and the lower legged parallel mechanisms. They provide various types of gaits to walk rough terrain and climb over a wall with small degrees of freedom.

scholarly journals Reconfiguration Analysis of a 3-DOF Parallel Mechanism

Robotics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 66
Author(s):  
Maurizio Ruggiu ◽  
Xianwen Kong
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Operation Mode ◽  
Parallel Mechanisms ◽  
Universal Joint ◽  
Kinematic Chains ◽  
Constraint Equations ◽  
The Third ◽  
Equilateral Triangles ◽  
Moving Platform

This paper deals with the reconfiguration analysis of a 3-DOF (degrees-of-freedom) parallel manipulator (PM) which belongs to the cylindrical parallel mechanisms family. The PM is composed of a base and a moving platform shaped as equilateral triangles connected by three serial kinematic chains (legs). Two legs are composed of two universal (U) joints connected by a prismatic (P) joint. The third leg is composed of a revolute (R) joint connected to the base, a prismatic joint and universal joint in sequence. A set of constraint equations of the 1-RPU−2-UPU PM is derived and solved in terms of the Euler parameter quaternion (a.k.a. Euler-Rodrigues quaternion) representing the orientation of the moving platform and of the Cartesian coordinates of the reference point on the moving platform. It is found that the PM may undergo either the 3-DOF PPR or the 3-DOF planar operation mode only when the base and the moving platform are identical. The transition configuration between the operation modes is also identified.

Kinematics and Workspace Analysis of 3-RPP Parallel Mechanism

2013 ◽  
Vol 456 ◽  
pp. 146-150
Author(s):  
Zhi Jiang Xie ◽  
Jun Zhang ◽  
Xiao Bo Liu
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Parallel Mechanisms ◽  
Vector Method ◽  
Workspace Analysis ◽  
Inverse Solutions ◽  
Three Degrees Of Freedom

This paper designed a kind of parallel mechanism with three degrees of freedom, the freedom and movement types of the robot are analyzed in detail, the parallel mechanisms Kinematics positive and inverse solutions are derived through using the vector method. And at last its workspace is analyzed and studied systematically.

Novel Design and Analysis of a Fully Decoupled 3-DOF Spherical Parallel Robot

2009 ◽  
Author(s):  
Dan Zhang ◽  
Fan Zhang
Keyword(s):  
Physical Meaning ◽  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Parallel Robot ◽  
Degree Of Freedom ◽  
Redundant Constraints ◽  
Rotational Motions ◽  
Three Degree Of Freedom ◽  
Novel Design

In this paper, we propose a unique, decoupled Three Degree-of-Freedom (DOF) parallel wrist. The condition required for synthesizing a fully isotropic parallel mechanism is obtained based on the physical meaning of the row vector in the Jacobian Matrix. Specifically, an over-constrained spherical 3-DOF parallel mechanism is presented and the modified structure, which avoids the redundant constraints, is also introduced. The proposed manipulator is capable of decoupled rotational motions around the x, y and z axes and contains an output angle that is equal to the input angle. Since this device is analyzed with the Jacobian Matrix, which is constant, the mechanism is free of singularity and maintains homogenous stiffness over the entire workspace.

Sign in / Sign up

Export Citation Format

Share Document