A Thermodynamic Model of a High Temperature Hybrid Compressed Air Energy Storage System for Grid Storage

2016 ◽  
Author(s):  
Sammy Houssainy ◽  
Reza Baghaei Lakeh ◽  
H. Pirouz Kavehpour
Keyword(s):  
Global Warming ◽  
Energy Storage ◽  
Power Plants ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Compressed Air ◽  
Compressed Air Energy Storage ◽  
Energy Storage Systems

Human activity is overloading our atmosphere with carbon dioxide and other global warming emissions. These emissions trap heat, increase the planet’s temperature, and create significant health, environmental, and climate issues. Electricity production accounts for more than one-third of U.S. global warming emissions, with the majority generated by coal-fired power plants. These plants produce approximately 25 percent of total U.S. global warming emissions. In contrast, most renewable energy sources produce little to no global warming emissions. Unfortunately, generated electricity from renewable sources rarely provides immediate response to electrical demands, as the sources of generation do not deliver a regular supply easily adjustable to consumption needs. This has led to the emergence of storage as a crucial element in the management of energy, allowing energy to be released into the grid during peak hours and meet electrical demands. Compressed air energy storage can potentially allow renewable energy sources to meet electricity demands as reliably as coal-fired power plants. Most compressed air energy storage systems run at very high pressures, which possess inherent problems such as equipment failure, high cost, and inefficiency. This research aims to illustrate the potential of compressed air energy storage systems by illustrating two different discharge configurations and outlining key variables, which have a major impact on the performance of the storage system. Storage efficiency is a key factor to making renewable sources an independent form of sustainable energy. In this paper, a comprehensive thermodynamic analysis of a compressed air energy storage system is presented. Specifically, a detailed study of the first law of thermodynamics of the entire system is presented followed by a thorough analysis of the second law of thermodynamics of the complete system. Details of both discharge and charge cycles of the storage system are presented. The first and second law based efficiencies of the system are also presented along with parametric studies, which demonstrates the effects of various thermodynamic cycle variables on the total round-trip efficiency of compressed air energy storage systems.

Modeling an Energy Storage System Based on a Hybrid Renewable Energy System in Stand-alone Applications

2017 ◽  
Vol 68 (11) ◽  
pp. 2641-2645
Author(s):  
Alexandru Ciocan ◽  
Ovidiu Mihai Balan ◽  
Mihaela Ramona Buga ◽  
Tudor Prisecaru ◽  
Mohand Tazerout
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Compressed Air ◽  
Energy Sources ◽  
Energy Storage Systems ◽  
Hybrid Renewable Energy System

The current paper presents an energy storage system that stores the excessive energy, provided by a hybrid system of renewable energy sources, in the form of compressed air and thermal heat. Using energy storage systems together with renewable energy sources represents a major challenge that could ensure the transition to a viable economic future and a decarbonized economy. Thermodynamic calculations are conducted to investigate the performance of such systems by using Matlab simulation tools. The results indicate the values of primary and global efficiencies for various operating scenarios for the energy storage systems which use compressed air as medium storage, and shows that these could be very effective systems, proving the possibility to supply to the final user three types of energy: electricity, heat and cold function of his needs.

scholarly journals Comparing Subsurface Energy Storage Systems: Underground Pumped Storage Hydropower, Compressed Air Energy Storage and Suspended Weight Gravity Energy Storage

2020 ◽  
Vol 162 ◽  
pp. 01001
Author(s):  
Javier Menéndez ◽  
Falko Schmidt ◽  
Jorge Loredo
Keyword(s):  
Energy Storage ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Compressed Air ◽  
System Control ◽  
Compressed Air Energy Storage ◽  
Energy Storage Systems ◽  
Power System Control ◽  
Underground Reservoir ◽  
Pumped Storage

In the current energy context, intermittent and non-dispatchable renewable energy sources, such as wind and solar photovoltaic (generation does not necessarily correspond to demand), require flexible solutions to store energy. Energy storage systems (ESS) are able to balance the intermittent and volatile generation outputs of variable renewable energies (VRE). ESS provide ancillary services such as: frequency, primary and voltage control to the power grid. In order to fulfil the power system control, ESS can switch within seconds for different operation modes. Many times, ESS imply environment impacts on landscape and society. To solve this problem, disused underground spaces, such as closed mines, can be used as underground reservoir for energy storage plants. In this paper, a comparative analysis between underground pumped storage hydropower (UPSH), compressed air energy storage (CAES) and suspended weight gravity energy storage (SWGES) with suspended weights in abandoned mine shafts is carried out. Pumped storage hydropower (PSH) is the most mature concept and account for 99% of bulk storage capacity worldwide. The results obtained show that in UPSH and CAES plants, the amount of stored energy depends mainly on the underground reservoir capacity, while in SWGES plants depends on the depth of the mine shafts and the mass. The energy stored in a SWGES plant (3.81 MWh cycle-1 with 600 m of usable depth assuming 3,000 tonne suspended weight) is much lower than UPSH and CAES plants.

Performance Analysis of a Compressed Humid Air Energy Storage System

2014 ◽  
Author(s):  
Huisheng Zhang ◽  
Dengji Zhou ◽  
Di Huang ◽  
Xinhui Wang
Keyword(s):  
Energy Storage ◽  
Power Plants ◽  
Storage System ◽  
Energy Storage System ◽  
Energy Utilization ◽  
Compressed Air ◽  
Working Fluid ◽  
Power Demand ◽  
Compressed Air Energy Storage ◽  
Humid Air

With the growing need for the use of electricity, power plants sometimes cannot generate enough power during the high demand periods. Thus various methods are introduced to solve this situation. Compressed air energy storage (CAES) technology seems to be a good solution to both peaking power demand and intermittent energy utilization transformed from renewable energy source like wind energy. Utilization of heat generated from the air compression process is a crucial problem of this technology. A compressed air energy storage system, with humid air as working fluid, is designed in this paper. In this system, heat of compressing air is transformed to the latent heat of water vapour, decreasing the power consumption of compressor and increasing energy generated per volume of storage. A Compressed Humid Air Energy Storage (CHAES) system model is established in this paper to simulate the performance of this system. Then the performance of this new system is evaluated by comparison to conventional CAES system, based on the simulation result. The result of this paper confirm the growing interest to CAES as a solution to peaking power demand and intermittent energy utilization, and indicates that CHAES system, as a great improvement of CAES system, has huge potential in the future.

scholarly journals Sizing of Hybrid Energy Storage Systems for Inertial and Primary Frequency Control

2021 ◽  
Vol 9 ◽  
Author(s):  
Erick Fernando Alves ◽  
Daniel dos Santos Mota ◽  
Elisabetta Tedeschi
Keyword(s):  
Energy Storage ◽  
Storage Systems ◽  
Frequency Control ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Storage Device ◽  
Energy Storage Systems ◽  
Hybrid Energy ◽  
Hybrid Energy Storage

The exponential rise of renewable energy sources and microgrids brings about the challenge of guaranteeing frequency stability in low-inertia grids through the use of energy storage systems. This paper reviews the frequency response of an ac power system, highlighting its different time scales and control actions. Moreover, it pinpoints main distinctions among high-inertia interconnected systems relying on synchronous machines and low-inertia systems with high penetration of converter-interfaced generation. Grounded on these concepts and with a set of assumptions, it derives algebraic equations to rate an energy storage system providing inertial and primary control. The equations are independent of the energy storage technology, robust to system nonlinearities, and rely on parameters that are typically defined by system operators, industry standards, or network codes. Using these results, the authors provide a step-by-step procedure to size the main components of a converter-interfaced hybrid energy storage system. Finally, a case study of a wind-powered oil and gas platform in the North Sea demonstrates with numerical examples how the proposed methodology 1) can be applied in a practical problem and 2) allows the system designer to take advantage of different technologies and set specific requirements for each storage device and converter according to the type of frequency control provided.

scholarly journals Sizing and Management of Energy Storage Systems in Large-Scale Power Plants Using Price Control and Artificial Intelligence

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3296
Author(s):  
Carlos García-Santacruz ◽  
Luis Galván ◽  
Juan M. Carrasco ◽  
Eduardo Galván
Keyword(s):  
Energy Storage ◽  
Power Plants ◽  
Large Scale ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Ancillary Services ◽  
Energy Sources ◽  
Energy Storage Systems ◽  
Electric System ◽  
Fundamental Part

Energy storage systems are expected to play a fundamental part in the integration of increasing renewable energy sources into the electric system. They are already used in power plants for different purposes, such as absorbing the effect of intermittent energy sources or providing ancillary services. For this reason, it is imperative to research managing and sizing methods that make power plants with storage viable and profitable projects. In this paper, a managing method is presented, where particle swarm optimisation is used to reach maximum profits. This method is compared to expert systems, proving that the former achieves better results, while respecting similar rules. The paper further presents a sizing method which uses the previous one to make the power plant as profitable as possible. Finally, both methods are tested through simulations to show their potential.

Sign in / Sign up

Export Citation Format

Share Document