Tip-Shroud Labyrinth Seal Effect on the Flutter Stability of Turbine Rotor Blades

2019 ◽  
Author(s):  
Roque Corral ◽  
Michele Greco ◽  
Almudena Vega
Keyword(s):  
Rotor Blade ◽  
Labyrinth Seal ◽  
Turbine Rotor ◽  
Rotor Blades ◽  
Stability Prediction ◽  
Labyrinth Seals ◽  
Turbine Rotor Blade ◽  
The Stability ◽  
Shrouded Rotor ◽  
Tip Shroud

Abstract The effect of the tip-shroud seal on the flutter onset of a shrouded turbine rotor blade, representative of a modern gas turbine, is numerically tested and the contribution to the work-per-cycle of the aerofoil and the tip-shroud are clearly identified. The numerical simulations are conducted using a linearised frequency domain solver. The flutter stability of the shrouded rotor blade is evaluated for an edgewise mode and compared with the standard industrial approach of not including the tip-shroud cavity. It turns out that including the tip shroud significantly changes the stability prediction of the rotor blade. This is due to the fact that the amplitude of the unsteady pressure created in the inter-fin cavity, due to the motion of the airfoil, is much greater than that of the airfoil. It is concluded that the combined effect of the seal and its platform tends to stabilise the rotor blade for all the examined nodal diameters and reduced frequencies. Finally, the numerical results are shown to be consistent with those obtained using an analytical simplified model to account for the effect of the labyrinth seals.

Tip-Shroud Labyrinth Seal Effect on the Flutter Stability of Turbine Rotor Blades

2019 ◽  
Vol 141 (10) ◽  
Author(s):  
Roque Corral ◽  
Michele Greco ◽  
Almudena Vega
Keyword(s):  
Rotor Blade ◽  
Labyrinth Seal ◽  
Turbine Rotor ◽  
Rotor Blades ◽  
Labyrinth Seals ◽  
Turbine Rotor Blade ◽  
The Stability ◽  
Shrouded Rotor ◽  
Tip Shroud ◽  
The Impact

Abstract The effect of the tip-shroud seal on the flutter onset of a shrouded turbine rotor blade, representative of a modern gas turbine, is numerically tested, and the contributions to the work per cycle of the aerofoil and the tip shroud are clearly identified. The numerical simulations are conducted using a linearized frequency-domain solver. The flutter stability of the shrouded rotor blade is evaluated for an edgewise mode and compared with the standard industrial approach of not including the tip-shroud cavity. It turns out that including the tip shroud significantly changes the stability prediction of the rotor blade. This is due to two facts. First, the amplitude of the unsteady pressure created in the inter-fin cavity due to the motion of the airfoil is much greater than that of the airfoil. The impact of this contribution increases with the frequency. Second, the effect of the outer shroud of the rotor blade, which usually is not included either in the simulations, has an opposite trend with the nodal diameter than the airfoil reducing the maximum and minimum damping. It is concluded that the combined effect of the seal and its platform tends to stabilize the edgewise mode of the rotor blade for all the examined nodal diameters and reduced frequencies. Finally, the numerical results are shown to be consistent with those obtained using an analytical simplified model to account for the effect of the labyrinth seals.

scholarly journals Numerical and Experimental Vibration Analysis of a Steam Turbine Rotor Blade

2021 ◽  
Vol 15 (4) ◽  
pp. 462-466
Author(s):  
Marko Katinić ◽  
Marko Ljubičić
Keyword(s):  
Numerical Model ◽  
Modal Analysis ◽  
Steam Turbine ◽  
Vibration Analysis ◽  
Rotor Blade ◽  
High Reliability ◽  
Turbine Rotor ◽  
Rotor Blades ◽  
Turbine Rotor Blade ◽  
Computer Environment

Damage to the rotor blade of a steam turbine is a relatively common problem and is one of the leading causes of sudden and unplanned shutdowns of a steam turbine. Therefore, the high reliability of the rotor blades is very important for the safe and economical operation of the steam turbine. To ensure high reliability, it is necessary to perform a vibration analysis of the rotor blades experimentally and in a computer environment. In this paper, a modal analysis was performed on the twisted blade of the last stage of the turbine in the Ansys software. The results of the modal analysis of the stationary rotor blade were compared with the results obtained by the bump test, which confirmed the numerical model of the blade. A modal analysis of a rotating rotor blade was performed on the same numerical model, and Campbell diagrams were plotted to determine the critical speed

3D Woven Carbon/Glass Hybrid Spar Cap for Wind Turbine Rotor Blade

2006 ◽  
Vol 128 (4) ◽  
pp. 562-573 ◽  
Author(s):  
Mansour H. Mohamed ◽  
Kyle K. Wetzel
Keyword(s):  
Wind Turbine ◽  
Carbon Fibers ◽  
Rotor Blade ◽  
Turbine Rotor ◽  
Rotor Blades ◽  
Constant Thickness ◽  
Turbine Rotor Blade ◽  
Parametric Studies ◽  
The Impact ◽  
Wind Turbine Rotor

This paper presents the design and analysis for a spar cap for a wind turbine rotor blade. The cap is formed of an integral, unitary 3D woven material (3WEAVE®) having constant thickness; spar cap weight is varied and controlled by appropriately tapering the cap width from the blade root to tip. This analysis is employed for 24-m and 37-m rotor blades. These studies are conducted parametrically, examining a range of 3WEAVE® materials incorporating varying fractions of glass and carbon fibers, and hence exhibiting a range of structural properties and material costs. These parametric studies are used to determine the impact on blade weight and cost resulting from the various materials studied. Detailed results are presented in the form of tables to enable candidate materials to be evaluated as they are developed.

Big challenges: the role of resin in wind turbine rotor blade development

2010 ◽  
Vol 54 (1) ◽  
pp. 36-39 ◽  
Author(s):  
Paul Langemeier ◽  
Christoph Scheuer
Keyword(s):  
Wind Turbine ◽  
Rotor Blade ◽  
Turbine Rotor ◽  
Turbine Rotor Blade ◽  
Wind Turbine Rotor

Lateral Forces From Single Gland Rotor Labyrinth Seals in Turbines

2004 ◽  
Vol 126 (3) ◽  
pp. 626-634 ◽  
Author(s):  
Bum Ho Song ◽  
Seung Jin Song
Keyword(s):  
Axial Direction ◽  
Labyrinth Seal ◽  
Turbine Stage ◽  
Labyrinth Seals ◽  
Flow Response ◽  
Lateral Forces ◽  
Downstream Flow ◽  
Shrouded Rotor ◽  
Upstream Flow ◽  
Sealing Gap

Even though interest in labyrinth seal flows has increased recently, an analytical model capable of predicting turbine flow response to labyrinth seals is still lacking. Therefore, this paper presents a new model to predict flow response in an axial turbine stage with a shrouded rotor. A concentric model is first developed, and this model is used to develop an eccentric model. Basic conservation laws are used in each model, and a nonaxisymmetric sealing gap is prescribed for the eccentric model. Thus, the two models can predict the evolution of a uniform upstream flow into a nonuniform downstream flow. In turbines with concentric shrouded rotors, the seal flow is retarded in the axial direction and tangentially underturned. In turbines with eccentric shrouded rotors, flow azimuthally migrates away from and pressure reaches its peak near the maximum sealing gap region. Finally, the rotordynamic implications of such flow nonuniformities are discussed and compared against eccentric unshrouded turbine predictions.

Implementation of bending-torsion coupling in the design of a wind-turbine rotor-blade

1999 ◽  
Vol 63 (3) ◽  
pp. 191-207 ◽  
Author(s):  
W.C. de Goeij ◽  
M.J.L. van Tooren ◽  
A. Beukers
Keyword(s):  
Wind Turbine ◽  
Rotor Blade ◽  
Turbine Rotor ◽  
Turbine Rotor Blade ◽  
Wind Turbine Rotor

Aerodynamic Data for Two Variants of Root Turbine Blade Sections for a 54″ Turbine Rotor Blade

2014 ◽  
Author(s):  
David Šimurda ◽  
Martin Luxa ◽  
Pavel Šafařík ◽  
Jaroslav Synáč ◽  
Bartoloměj Rudas
Keyword(s):  
Limit Load ◽  
Axial Direction ◽  
Turbine Rotor ◽  
Rotor Blades ◽  
Angle Of Incidence ◽  
Flow Angle ◽  
Turbine Rotor Blade ◽  
Blade Cascade ◽  
The Difference ◽  
Kinetic Energy Loss

Aerodynamic investigations were performed on planar blade cascades representing two alternative root sections of rotor blades 54″ in length with straight fir-tree root. Each of the variants was designed for different number of blades in the rotor. This paper presents the results of measurements showing the dependency of the kinetic energy loss coefficient and the exit flow angle on the exit isoentropic Mach number and the angle of incidence. Images of the flow fields are also presented. The experimental data is analyzed to assess and document the difference between the two root section designs. Results show that requirement of straight fir tree root leading to high design incidence angles significantly limit operation range. Also in case of root sections with high exit Mach numbers a limit load conditions are an issue. In order to utilize available pressure drop blade cascade throat/pitch ratios should be kept as high as possible which favorites variant with lower number of blades and higher outlet metal angle (relative to axial direction).

Sign in / Sign up

Export Citation Format

Share Document