scholarly journals Generation-IV Multi-Application Small Light Water Reactor (MASLWR)

Author(s):  
S. Michael Modro ◽  
James Fisher ◽  
Kevan Weaver ◽  
Pierre Babka ◽  
Jose Reyes ◽  
...  

The Idaho National Engineering and Environmental Laboratory (INEEL), Nexant Inc. and the Oregon State University (OSU) have developed a Multi-Application Small Light Water Reactor (MASLWR) concept. The MASLWR is a small, safe and economic natural circulation pressurized light water reactor. MASLWR reactor module consists of an integral reactor/steam generator located in a steel cylindrical containment. The entire module is to be entirely shop fabricated and transported to site on most railways or roads. Two or more modules are located in a reactor building, each being submersed in a common, below grade cavity filled with water. For the most severe postulated accident, the volume of water in the cavity provides a passive ultimate heat sink for 3 or more days allowing the restoration of lost normal active heat removal systems. MASLWR thermal power of a single module is 150 MWt, primary system pressure 10.5 MPa, steam pressure 1.52 MPa and the net electrical output is 35–50 MWe.

Author(s):  
Fulvio Mascari ◽  
Giuseppe Vella ◽  
Brian G. Woods

Considering the world energy demand increase in order to fulfill an environmental and economic sustainability, the energy policy of each country has to diversify the sources of energy and use stable, safe energy production option able of producing electricity in a clean way contributing in cutting the CO2 emission. In the framework of the sustainable development, today the use of advanced nuclear power plant, have an important role in the environmental and economic sustainability of country energy strategy. In the last 20 years, in fact, the international community, taking into account the operational experience of the nuclear reactors, starts the development of new advanced reactor designs considering also the use of natural circulation for the cooling of the core in normal and transient conditions. In this framework, Oregon State University (OSU) has constructed, under a U.S. Department of Energy grant, a system level test facility to examine natural circulation phenomena characterizing the Multi-Application Small Light Water Reactor (MASLWR) design, a small modular integral pressurized light water reactor relying on natural circulation during both steady state and transient operation. It includes an integrated helical coil steam generator as well. Starting from an experimental campaign in support of the MASLWR concept design verification, the planned work, will be not only to specifically investigate the concept design further but also advance the broad understanding of integral natural circulation reactor plants and accompanying passive safety features as well. An IAEA International Collaborative Standard Problem (ICSP) on “Integral PWR Design Natural Circulation Flow Stability and Thermo-hydraulic Coupling of Containment and Primary System During Accidents” is hosting at OSU and the experimental data will be developed at the OSU-MASLWR facility. The purpose of this IAEA ICSP is to provide experimental data on single/two-phase flow instability phenomena under natural circulation conditions and coupled containment/reactor vessel behavior in integral-type light water reactors. These data can be used to assess thermal hydraulic codes for reactor system design and analysis as well. The first planned test investigates a stepwise reduction in the primary mass inventory of the facility while operating at reduced power (decay power). The second planned test, investigates a loss of feed water transient with subsequent primary blowdown due to automatic depressurization system actuation and long term cooling phase. The target of this paper is to contribute to the thermal hydraulic analysis of the expected phenomena of these transients on the basis of the TRACE V5 Patch 01 calculated data developed during the double-blind phase of the ICSP.


2020 ◽  
Vol 145 ◽  
pp. 106987 ◽  
Author(s):  
Mingjun Wang ◽  
Annalisa Manera ◽  
Victor Petrov ◽  
Matthew J. Memmott ◽  
Suizheng Qiu ◽  
...  

1994 ◽  
Vol 153 (1) ◽  
pp. 71-86 ◽  
Author(s):  
K. Shibata ◽  
T. Isozaki ◽  
S. Ueda ◽  
R. Kurihara ◽  
K. Onizawa ◽  
...  

Author(s):  
Mitch Hokazono ◽  
Clayton T. Smith

Integral light-water reactor designs propose the use of steam generators located within the reactor vessel. Steam generator tubes in these designs must withstand external pressure loadings to prevent buckling, which is affected by material strength, fabrication techniques, chemical environment and tube geometry. Experience with fired tube boilers has shown that buckling in boiler tubes is greatly alleviated by controlling ovality in bends when the tubes are fabricated. Light water reactor steam generator pressures will not cause a buckling problem in steam generators with reasonable fabrication limits on tube ovality and wall thinning. Utilizing existing Code rules, there is a significant design margin, even for the maximum differential pressure case. With reasonable bend design and fabrication limits the helical steam generator thermodynamic advantages can be realized without a buckling concern. This paper describes a theoretical methodology for determining allowable external pressure for steam generator tubes subject to tube ovality based on ASME Section III Code Case N-759-2 rules. A parametric study of the results of this methodology applied to an elliptical cross section with varying wall thicknesses, tube diameters, and ovality values is also presented.


2008 ◽  
Vol 164 (3) ◽  
pp. 337-347 ◽  
Author(s):  
Yang-Hyun Koo ◽  
Byung-Ho Lee ◽  
Jae-Yong Oh ◽  
Kun-Woo Song

Sign in / Sign up

Export Citation Format

Share Document