AFCEN RCC-F: A New Standard for the Fire Protection Design of New Built Light Water Nuclear Power Plants

2018 ◽  
Author(s):  
Bernard Gautier ◽  
Mickael Cesbron ◽  
Richard Tulinski
Keyword(s):  
Fire Protection ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Fire Hazard ◽  
Pressurized Water ◽  
Light Water ◽  
Protection Scheme ◽  
Safety Case ◽  
Under Construction

Fire hazard is an important issue for the safety of nuclear power plants: the main internal hazard in terms of frequency, and probably one the most significant with regards to the design costs. AFCEN is publishing in 2018 a new code for fire protection of new built PWR nuclear plants, so-called RCC-F. This code is an evolution of the former ETC-F code which has been applied to different EPR plants under construction (Flamanville 3 (FA3, France), Hinkley Point C (HPC, United Kingdom), Taïshan (TSN, China)). The RCC-F code presents significant enhancement and evolutions resulting from eight years of work by the AFCEN dedicated sub-committee, involving a panel of contributors from the nuclear field. It is now opened to any type of PWR (Pressurized Water Reactor) type of nuclear power plants and not any longer limited to EPR (European Pressurized Reactor) plants. It can potentially be adapted to other light water concepts. Its objective is to help engineers design the fire prevention and protection scheme, systems and equipment with regards to the safety case and the defense in depth taking into account the French and European experience in the field. It deals also with the national regulations, with two appendices dedicated to French and British regulations respectively. The presentation gives an overview of the code specifications and focuses on the significant improvements.

scholarly journals Calculation of Potential Radiation Doses Associated with Predisposal Management of Dismantled Steam Generators from Nuclear Power Plants

2020 ◽  
Vol 12 (12) ◽  
pp. 5149
Author(s):  
Ga Hyun Chun ◽  
Jin-ho Park ◽  
Jae Hak Cheong
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Radiation Doses ◽  
Steam Generators ◽  
Pressurized Water ◽  
Water Reactor ◽  
General Pathway ◽  
Heavy Water Reactor ◽  
Past Experiences

Although the generation of large components from nuclear power plants is expected to gradually increase in the future, comprehensive studies on the radiological risks of the predisposal management of large components have been rarely reported in open literature. With a view to generalizing the assessment framework for the radiological risks of the processing and transport of a representative large component—a steam generator—12 scenarios were modeled in this study based on past experiences and practices. In addition, the general pathway dose factors normalized to the unit activity concentration of radionuclides for processing and transportation were derived. Using the general pathway dose factors, as derived using the approach established in this study, a specific assessment was conducted for steam generators from a pressurized water reactor (PWR) or a pressurized heavy water reactor (PHWR) in Korea. In order to demonstrate the applicability of the developed approach, radiation doses reported from actual experiences and studies are compared to the calculated values in this study. The applicability of special arrangement transportation of steam generators assumed in this study is evaluated in accordance with international guidance. The generalized approach to assessing the radiation doses can be used to support optimizing the predisposal management of large components in terms of radiological risk.

scholarly journals Small nuclear power plants for power supply in arctic regions: assessment of spent nuclear fuel radioactivity

2018 ◽  
Vol 4 (2) ◽  
pp. 119-125
Author(s):  
Vadim Naumov ◽  
Sergey Gusak ◽  
Andrey Naumov
Keyword(s):  
Nuclear Fuel ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Fuel Cycle ◽  
Mass Composition ◽  
Published Data ◽  
Pressurized Water ◽  
Fuel Cycles ◽  
Reactor Cores

The purpose of the present study is the investigation of mass composition of long-lived radionuclides accumulated in the fuel cycle of small nuclear power plants (SNPP) as well as long-lived radioactivity of spent fuel of such reactors. Analysis was performed of the published data on the projects of SNPP with pressurized water-cooled reactors (LWR) and reactors cooled with Pb-Bi eutectics (SVBR). Information was obtained on the parameters of fuel cycle, design and materials of reactor cores, thermodynamic characteristics of coolants of the primary cooling circuit for reactor facilities of different types. Mathematical models of fuel cycles of the cores of reactors of ABV, KLT-40S, RITM-200M, UNITERM, SVBR-10 and SVBR-100 types were developed. The KRATER software was applied for mathematical modeling of the fuel cycles where spatial-energy distribution of neutron flux density is determined within multi-group diffusion approximation and heterogeneity of reactor cores is taken into account using albedo method within the reactor cell model. Calculation studies of kinetics of burnup of isotopes in the initial fuel load (235U, 238U) and accumulation of long-lived fission products (85Kr, 90Sr, 137Cs, 151Sm) and actinoids (238,239,240,241,242Pu, 236U, 237Np, 241Am, 244Cm) in the cores of the examined SNPP reactor facilities were performed. The obtained information allowed estimating radiation characteristics of irradiated nuclear fuel and implementing comparison of long-lived radioactivity of spent reactor fuel of the SNPPs under study and of their prototypes (nuclear propulsion reactors). The comparison performed allowed formulating the conclusion on the possibility in principle (from the viewpoint of radiation safety) of application of SNF handling technology used in prototype reactors in the transportation and technological process layouts of handling SNF of SNPP reactors.

Steady-State Thermal-Hydraulic Analysis of a Particle-Bedded Boiling Water Reactor

2009 ◽  
Author(s):  
Xiaoyu Cai ◽  
Suizheng Qiu ◽  
Guanghui Su ◽  
Changyou Zhao
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Superheated Steam ◽  
Nuclear Reactor ◽  
Hydraulic Analysis ◽  
Light Water ◽  
Safety Systems ◽  
Fuel Elements ◽  
Thermal Hydraulic Analysis

The current Light Water Reactors both BWR and PWR have extensive nuclear reactor safety systems, which provide safe and economical operation of Nuclear Power Plants. During about forty years of operation history the safety systems of Nuclear Power Plants have been upgraded in an evolutionary manner. The cost of safety systems, including large containments, is really high due to a capital cost and a long construction period. These conditions together with a low efficiency of steam cycle for LWR create problems to build new power plants in the USA and in the Europe. An advanced Boiling Water Reactor concept with micro-fuel elements (MFE) and superheated steam promises a radical enhancement of safety and improvement of economy of Nuclear Power Plants. In this paper, a new type of nuclear reactor is presented that consists of a steel-walled tube filled with millions of TRISO-coated fuel particles (Micro-Fuel Elements, MFE) directly cooled by a light-water coolant-moderator. Water is used as coolant that flows from bottom to top through the tube, thereby fluidizing the particle bed, and the moderator water flows in the reverse direction out of the tube. The fuel consists of spheres of about 2.5 mm diameter of UO2 with several coatings of different carbonaceous materials. The external coating of steam cycle the particles is silicon carbide (SiC), manufactured with chemical vapor deposit (CVD) technology. Steady-State Thermal-Hydraulic Analysis aims at providing heat transport capability which can match with the heat generated by the core, so as to provide a set of thermal hydraulic parameters of the primary loop. So the temperature distribution and the pressure losses along the direction of flow are calculated for equilibrium core in this paper. The calculation not only includes the liquid region, but the two phase region and the superheated steam region. The temperature distribution includes both the temperature parameters of micro-fuel elements and the coolant. The results show that the maximum fuel temperature is much lower than the limitation and the flow distribution can meet the cooling requirement in the reactor core.

Sign in / Sign up

Export Citation Format

Share Document