scholarly journals On the Design of a Biodegradable POC-HA Polymeric Cardiovascular Stent

2012 ◽  
Author(s):  
Joonas Ponkala ◽  
Mohsin Rizwan ◽  
Panos S. Shiakolas
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Material Properties ◽  
Three Dimensional ◽  
Polymeric Composite ◽  
Coronary Stent ◽  
Element Analysis ◽  
Material Models ◽  
Solid Models ◽  
Biodegradable Stents

The current state of the art in coronary stent technology, tubular structures used to keep the lumen open, is mainly populated by metallic stents coated with certain drugs to increase biocompatibility, even though experimental biodegradable stents have appeared in the horizon. Biodegradable polymeric stent design necessitates accurate characterization of time dependent polymer material properties and mechanical behavior for analysis and optimization. This manuscript presents the process for evaluating material properties for biodegradable biocompatible polymeric composite poly(diol citrate) hydroxyapatite (POC-HA), approaches for identifying material models and three dimensional solid models for finite element analysis and fabrication of a stent. The developed material models were utilized in a nonlinear finite element analysis to evaluate the suitability of the POC-HA material for coronary stent application. In addition, the advantages of using femtosecond laser machining to fabricate the POC-HA stent are discussed showing a machined stent. The methodology presented with additional steps can be applied in the development of a biocompatible and biodegradable polymeric stents.

scholarly journals A Three-Dimensional Inverse Finite Element Analysis of the Heel Pad

2012 ◽  
Vol 134 (3) ◽  
Author(s):  
Snehal Chokhandre ◽  
Jason P. Halloran ◽  
Antonie J. van den Bogert ◽  
Ahmet Erdemir
Keyword(s):  
Experimental Data ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Material Properties ◽  
Three Dimensional ◽  
Element Analysis ◽  
Heel Pad ◽  
Tool Force ◽  
Specific Material ◽  
Inverse Finite Element Analysis

Quantification of plantar tissue behavior of the heel pad is essential in developing computational models for predictive analysis of preventive treatment options such as footwear for patients with diabetes. Simulation based studies in the past have generally adopted heel pad properties from the literature, in return using heel-specific geometry with material properties of a different heel. In exceptional cases, patient-specific material characterization was performed with simplified two-dimensional models, without further evaluation of a heel-specific response under different loading conditions. The aim of this study was to conduct an inverse finite element analysis of the heel in order to calculate heel-specific material properties in situ. Multidimensional experimental data available from a previous cadaver study by Erdemir et al. (“An Elaborate Data Set Characterizing the Mechanical Response of the Foot,” ASME J. Biomech. Eng., 131(9), pp. 094502) was used for model development, optimization, and evaluation of material properties. A specimen-specific three-dimensional finite element representation was developed. Heel pad material properties were determined using inverse finite element analysis by fitting the model behavior to the experimental data. Compression dominant loading, applied using a spherical indenter, was used for optimization of the material properties. The optimized material properties were evaluated through simulations representative of a combined loading scenario (compression and anterior-posterior shear) with a spherical indenter and also of a compression dominant loading applied using an elevated platform. Optimized heel pad material coefficients were 0.001084 MPa (μ), 9.780 (α) (with an effective Poisson’s ratio (ν) of 0.475), for a first-order nearly incompressible Ogden material model. The model predicted structural response of the heel pad was in good agreement for both the optimization (<1.05% maximum tool force, 0.9% maximum tool displacement) and validation cases (6.5% maximum tool force, 15% maximum tool displacement). The inverse analysis successfully predicted the material properties for the given specimen-specific heel pad using the experimental data for the specimen. The modeling framework and results can be used for accurate predictions of the three-dimensional interaction of the heel pad with its surroundings.

Role of Material Properties in the Finite Element Solution for Three-Dimensional Composites—A Sensitivity Study

1995 ◽  
Vol 209 (2) ◽  
pp. 157-160
Author(s):  
H-B Hellweg ◽  
M A Crisfield
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Material Properties ◽  
Three Dimensional ◽  
Transversely Isotropic ◽  
Sensitivity Study ◽  
Two Dimensional ◽  
Element Analysis ◽  
The Impact

Three-dimensional material test data for orthotropic laminae are difficult to obtain. Consequently, various simplifications are made for the material properties of individual layers in a finite element analysis, ranging from the assumption of transversely isotropic layers to applying two-dimensional material data in a three-dimensional analysis. In order to investigate the impact and validity of such simplifications, the sensitivity of the stresses and deformations in a finite element analysis on the material properties was investigated.

Finite Element Analysis of Chromium Layer for Cold Roller Based on Material Properties and Mechanics Properties

2013 ◽  
Vol 700 ◽  
pp. 160-163
Author(s):  
Juan Wang ◽  
Si Yu Lai ◽  
Jin Zhou
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Material Properties ◽  
Three Dimensional ◽  
Rolling Process ◽  
Asymmetric Rolling ◽  
Chromium Layer ◽  
Element Analysis ◽  
Chromium Plating ◽  
Plating Method

The chromium-plating method is proposed to solve the wear and spalling problem of the cold roller in the rolling process. A three-dimensional asymmetric rolling model is constructed by using elastic-plastic finite tool, and the stress on the roller in different plating hardness, thickness and layers in cold rolling process is analyzed. By comparing the simulated results, the optimized state for chromium layer is scheduled.

Finite Element Analysis of Nonuniformity of Tires with Imperfections5

2007 ◽  
Vol 35 (3) ◽  
pp. 226-238 ◽  
Author(s):  
K. M. Jeong ◽  
K. W. Kim ◽  
H. G. Beom ◽  
J. U. Park
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Radial Force ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Dimensional Finite Element ◽  
Force Variation ◽  
Three Dimensional Finite Element

Abstract The effects of variations in stiffness and geometry on the nonuniformity of tires are investigated by using the finite element analysis. In order to evaluate tire uniformity, a three-dimensional finite element model of the tire with imperfections is developed. This paper considers how imperfections, such as variations in stiffness or geometry and run-out, contribute to detrimental effects on tire nonuniformity. It is found that the radial force variation of a tire with imperfections depends strongly on the geometrical variations of the tire.

Sign in / Sign up

Export Citation Format

Share Document