Measurement of the Melt Pool Length During Single Scan Tracks in a Commercial Laser Powder Bed Fusion Process

2017 ◽  
Author(s):  
J. C. Heigel ◽  
B. M. Lane
Keyword(s):  
Laser Power ◽  
High Speed ◽  
Infrared Camera ◽  
Powder Bed Fusion ◽  
Single Track ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Melt Pool ◽  
Significant Difference ◽  
Scan Speed

This work presents high speed thermographic measurements of the melt pool length during single track laser scans on nickel alloy 625 substrates. Scans are made using a commercial laser powder bed fusion machine while measurements of the radiation from the surface are made using a high speed (1800 frames per second) infrared camera. The melt pool length measurement is based on the detection of the liquidus-solidus transition that is evident in the temperature profile. Seven different combinations of programmed laser power (49 W to 195 W) and scan speed (200 mm/s to 800 mm/s) are investigated and numerous replications using a variety of scan lengths (4 mm to 12 mm) are performed. Results show that the melt pool length reaches steady state within 2 mm of the start of each scan. Melt pool length increases with laser power, but its relationship with scan speed is less obvious because there is no significant difference between cases performed at the highest laser power of 195 W. Although keyholing appears to affect the anticipated trends in melt pool length, further research is required.

Measurement of the Melt Pool Length During Single Scan Tracks in a Commercial Laser Powder Bed Fusion Process

2018 ◽  
Vol 140 (5) ◽  
Author(s):  
J. C. Heigel ◽  
B. M. Lane
Keyword(s):  
Laser Power ◽  
High Speed ◽  
Infrared Camera ◽  
Powder Bed Fusion ◽  
Single Track ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Melt Pool ◽  
Significant Difference ◽  
Scan Speed

This work presents high-speed thermographic measurements of the melt pool length during single track laser scans on nickel alloy 625 substrates. Scans are made using a commercial laser powder bed fusion (PBF) machine while measurements of the radiation from the surface are made using a high speed (1800 frames per second) infrared camera. The melt pool length measurement is based on the detection of the liquidus–solidus transition that is evident in the temperature profile. Seven different combinations of programmed laser power (49–195 W) and scan speed (200–800 mm/s) are investigated, and numerous replications using a variety of scan lengths (4–12 mm) are performed. Results show that the melt pool length reaches steady-state within 2 mm of the start of each scan. Melt pool length increases with laser power, but its relationship with scan speed is less obvious because there is no significant difference between cases performed at the highest laser power of 195 W. Although keyholing appears to affect the anticipated trends in melt pool length, further research is required.

scholarly journals Melt Pool Features Analysis Using a High Speed Coaxial Monitoring System for Laser Powder Bed Fusion of Ti-6Al-4V Grade 23

2021 ◽  
Author(s):  
Aditi Thanki ◽  
Louca Goossens ◽  
Agusmian Partogi Ompusunggu ◽  
Mohamad Bayat ◽  
Abdellatif Bey-Temsamani ◽  
...  
Keyword(s):  
Energy Density ◽  
Laser Power ◽  
High Speed ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Porosity Formation ◽  
Powder Bed ◽  
Binary Images ◽  
Melt Pool ◽  
Scan Speed

Abstract In laser powder bed fusion (LPBF), defects such as pores or cracks can seriously affect the final part quality and lifetime. Keyhole porosity, being one type of porosity defects in LPBF, results from excessive energy density which may be due to changes in process parameters (laser power and scan speed) and/or result from the part’s geometry and/or hatching strategies. To study the possible occurrence of keyhole pores, experimental work as well as simulations were carried out for optimum and high volumetric energy density conditions in Ti-6Al-4V grade 23. By decreasing the scanning speed from 1000 mm/s to 500 mm/s for a fixed laser power of 170 W, keyhole porosities are formed and later observed by X-ray computed tomography. Melt pool images are recorded in real-time during the LPBF process by using a high speed coaxial Near-Infrared (NIR) camera monitoring system. The recorded images are then pre-processed using a set of image processing steps to generate binary images. From the binary images, geometrical features of the melt pool and features that characterize the spatter particles formation and ejection from the melt pool are calculated. The experimental data clearly show spatter patterns in case of keyhole porosity formation at low scan speed. A correlation between the number of pores and the amount of spatter is observed. Besides the experimental work, a previously developed, high fidelity finite volume numerical model was used to simulate the melt pool dynamics with similar process parameters as in the experiment. Simulation results illustrate and confirm the keyhole porosity formation by decreasing laser scan speed.

Real-time Image-based Feedback Control of Laser Powder Bed Fusion

2021 ◽  
pp. 1-12
Author(s):  
Aleksandr Shkoruta ◽  
Sandipan Mishra ◽  
Stephen Rock
Keyword(s):  
Real Time ◽  
Laser Power ◽  
Powder Bed Fusion ◽  
Single Track ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Melt Pool ◽  
Real Time Image ◽  
Time Image ◽  
Pool Image

Abstract This letter presents the design and experimental validation of a real-time image-based feedback control system for metal laser powder bed fusion (LPBF). A coaxial melt pool video stream is used to control laser power in real-time at 2 kHz. Modeling of the melt pool image response to changes in the input laser power is presented. Based on this identified model, a real-time feedback controller is implemented experimentally, on a single track and part scales. On a single-track scale, the controller successfully tracks a time-varying melt pool reference. On a part-level scale, the controller successfully regulates the melt pool image signature to the desired reference value, reducing layer-to-layer signal variation, and eliminating within-layer signal drift.

scholarly journals Process characterization and analysis of ceramic powder bed fusion

2021 ◽  
Author(s):  
Kevin Florio ◽  
Dario Puccio ◽  
Giorgio Viganò ◽  
Stefan Pfeiffer ◽  
Fabrizio Verga ◽  
...  
Keyword(s):  
High Speed ◽  
Ceramic Powder ◽  
Integrating Sphere ◽  
Alumina Powder ◽  
Powder Bed Fusion ◽  
Single Track ◽  
Ceramic Powders ◽  
Pure Alumina ◽  
Powder Bed ◽  
Melt Pool

AbstractPowder bed fusion (PBF) of ceramics is often limited because of the low absorptance of ceramic powders and lack of process understanding. These challenges have been addressed through a co-development of customized ceramic powders and laser process capabilities. The starting powder is made of a mix of pure alumina powder and alumina granules, to which a metal oxide dopant is added to increase absorptance. The performance of different granules and process parameters depends on a large number of influencing factors. In this study, two methods for characterizing and analyzing the PBF process are presented and used to assess which dopant is the most suitable for the process. The first method allows one to analyze the absorptance of the laser during the melting of a single track using an integrating sphere. The second one relies on in-situ video imaging using a high-speed camera and an external laser illumination. The absorption behavior of the laser power during the melting of both single tracks and full layers is proven to be a non-linear and extremely dynamic process. While for a single track, the manganese oxide doped powder delivers higher and more stable absorptance. When a full layer is analyzed, iron oxide-doped powder is leading to higher absorptance and a larger melt pool. Both dopants allow the generation of a stable melt-pool, which would be impossible with granules made of pure alumina. In addition, the present study sheds light on several phenomena related to powder and melt-pool dynamics, such as the change of melt-pool shape and dimension over time and powder denudation effects.

scholarly journals Manufacturing Aluminum/Multiwalled Carbon Nanotube Composites via Laser Powder Bed Fusion

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 3927
Author(s):  
Eo Ryeong Lee ◽  
Se Eun Shin ◽  
Naoki Takata ◽  
Makoto Kobashi ◽  
Masaki Kato
Keyword(s):  
Elastic Modulus ◽  
Carbon Nanotube ◽  
Energy Density ◽  
Laser Power ◽  
Multiwalled Carbon Nanotube ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Multiwalled Carbon ◽  
Powder Bed ◽  
Scan Speed

This study provides a novel approach to fabricating Al/C composites using laser powder bed fusion (LPBF) for a wide range of structural applications utilizing Al-matrix composites in additive manufacturing. We investigated the effects of LPBF on the fabrication of aluminum/multiwalled carbon nanotube (Al/MWCNT) composites under 25 different conditions, using varying laser power levels and scan speeds. The microstructures and mechanical properties of the specimens, such as elastic modulus and nanohardness, were analyzed, and trends were identified. We observed favorable sintering behavior under laser conditions with low energy density, which verified the suitability of Al/MWCNT composites for a fabrication process using LPBF. The size and number of pores increased in specimens produced under high energy density conditions, suggesting that they are more influenced by laser power than scan speed. Similarly, the elastic modulus of a specimen was also more affected by laser power than scan speed. In contrast, scan speed had a greater influence on the final nanohardness. Depending on the laser power used, we observed a difference in the crystallographic orientation of the specimens by a laser power during LPBF. When energy density is high, texture development of all samples tended to be more pronounced.

scholarly journals In Situ Thermography During Laser Powder Bed Fusion of a Nickel Superalloy 625 Artifact with Various Overhangs and Supports

2021 ◽  
Vol 126 ◽  
Author(s):  
Benjamin Molnar ◽  
Jarred C. Heigel ◽  
Eric Whitenton
Keyword(s):  
Cooling Rate ◽  
High Speed ◽  
Nickel Superalloy ◽  
Powder Bed Fusion ◽  
Support Structures ◽  
Radiance Temperature ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Melt Pool

This document provides details on the experiment and associated measurement files available fordownload in the dataset “In Situ Thermography During Laser Powder Bed Fusion of a Nickel Superalloy 625 Artifact with Various Overhangs and Supports.” The measurements were acquired during the fabrication of a small nickel superalloy 625 (IN625) artifact using a commercial laser powder bed fusion (LPBF) system. The artifact consists of two half-arch features with increasing slopes for overhangs. These overhangs range from 5° from vertical to 85° from vertical in increments of 10°. The artifact geometry and process are controlled to ensure consistent processing along the overhang geometry. This control enables the effect of overhang geometry and support structures to be isolated from effects of inter-layer scan strategy variations. The measurements include high-speed thermography of each layer, from which radiance temperature, cooling rate, and melt pool length are calculated.

Physics-Informed Gaussian Process Based Optimal Control of Laser Powder Bed Fusion

2020 ◽  
Author(s):  
Yong Ren ◽  
Qian Wang
Keyword(s):  
Optimal Control ◽  
Optimal Control Problem ◽  
Control Problem ◽  
Gaussian Process ◽  
Laser Power ◽  
Reference Value ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Melt Pool

Abstract Regulating the melt-pool size to a constant reference value during the build process is a challenging task in Laser Powder Bed Fusion additive manufacturing (LPBF-AM). This paper considers adjusting laser power to achieve a constant melt-pool volume during laser processing of a multi-track build under LPBF-AM. First, a Gaussian Process Regression (GPR) is applied to model the variation of the melt-pool volume along the deposition distance, with physics-informed input features. Then a constrained finite-horizon optimal control problem is formulated, with a quadratic cost function defined to minimize the difference between the melt-pool volume and a reference value. A projected gradient descent algorithm is applied to compute the sequence of laser power in the proposed optimal control problem. The GPR modeling of melt-pool dynamics is trained and tested using simulated data sets generated from a commercial finite-element based AM software, and the same commercial AM software is used to evaluate the control performance. Simulation results demonstrate the effectiveness of the proposed GPR modeling and optimal control in regulating melt-pool volume for building multi-track parts with LPBF-AM.

scholarly journals A Convolutional Neural Network for Prediction of Laser Power Using Melt-Pool Images in Laser Powder Bed Fusion

IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 23255-23263 ◽  
Author(s):  
Ohyung Kwon ◽  
Hyung Giun Kim ◽  
Wonrae Kim ◽  
Gun-Hee Kim ◽  
Kangil Kim
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Laser Power ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Melt Pool

Simulation Aided Process Development with Multi-Spot Strategies in Laser Powder-Bed Fusion

2021 ◽  
Vol 1161 ◽  
pp. 75-82
Author(s):  
Marcel Slodczyk ◽  
Alexander Ilin ◽  
Thomas Kiedrowski ◽  
Jens Schmiemann ◽  
Vasily Ploshikhin
Keyword(s):  
Laser Power ◽  
Process Development ◽  
Research Work ◽  
Spatial Arrangement ◽  
Quality Level ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Single Spot ◽  
Melt Pool

A challenge in laser powder-bed fusion is to achieve high process speed while maintaining quality level of the melting tracks. One approach to increase productivity is to distribute available laser power over several laser spots, resulting in higher melting rate. Using multiple laser spots opens up new parameter spaces in comparison to the conventional single-spot exposure. In addition to classical process parameters, e.g. total laser power and scanning speed, the distribution of power to the specific spots and the respective spatial arrangement have an impact on resulting process quality and speed. Within the scope of this research work, a physically based model is presented to define multi-spot process strategies for the generation of desired melt pool dimensions. Diffractive optical elements are used in order to adjust power or spatial arrangement of multiple laser spots. Resulting melt pool has more width and less depth compared to single-spot generated melt pools. Simulations and experiments show an optimum in applied spot distance between laser spots to obtain higher melting rates.

Sign in / Sign up

Export Citation Format

Share Document