Dynamic Response of Spar-Type Floating Offshore Wind Turbine in Freak Wave

Author(s):  
Yougang Tang ◽  
Yan Li ◽  
Peng Xie ◽  
Xiaoqi Qu ◽  
Bin Wang

Abstract Simulations are conducted in time domain to investigate the dynamic response of a SPAR-type floating offshore wind turbine under the scenarios with freak wave. Towards this end, a coupled aero-hydro numerical model is developed. The methodology includes a blade-element-momentum model for aerodynamics, a nonlinear model for hydrodynamics, a nonlinear restoring model of SPAR buoy, and a nonlinear algorithm for mooring cables. The OC3 Hywind SPAR-type FOWT is chosen as an example to study the dynamic response under the freak conditions, while the time series of freak wave is generated by the Random Frequency Components Selection Phase Modulation Method. The motions of platform, the tensions in the mooring lines and the power generation performance are documented in different cases. According to the simulations, it shows that the power coefficient of wind turbine decreased rapidly at the moment when freak wave acted on the floating structure.

Author(s):  
Yan Li ◽  
Xiaoqi Qu ◽  
Liqin Liu ◽  
Peng Xie ◽  
Tianchang Yin ◽  
...  

Abstract Simulations are conducted in time domain to investigate the dynamic response of a spar-type floating offshore wind turbine (FOWT) under the freak wave scenarios. Toward this end, a coupled aero-hydro-mooring in-house numerical code is adopted to perform the simulations. The methodology includes a blade-element-momentum (BEM) model for simulating the aerodynamic loads, a nonlinear model for simulating the hydrodynamic loads, a nonlinear restoring model of Spar buoy, and a nonlinear algorithm for simulating the mooring cables. The OC3 Hywind spar-type FOWT is adopted as an example to study the dynamic response under the freak wave conditions, meanwhile the time series of freak waves are generated using the random frequency components selection phase modulation method. The motion of platform, the tension applied on the mooring lines, and the power generation performance are documented in several cases. According to the simulations, it is indicated that when a freak wave acts on the FOWT, the transient motion of the FOWT is induced in all degrees-of-freedom, as well as the produced power decreases rapidly. Furthermore, the impact of freak wave parameters on the motion of FOWT is discussed.


2019 ◽  
Vol 7 (4) ◽  
pp. 115 ◽  
Author(s):  
Yane Li ◽  
Conghuan Le ◽  
Hongyan Ding ◽  
Puyang Zhang ◽  
Jian Zhang

The paper discusses the effects of mooring configurations on the dynamic response of a submerged floating offshore wind turbine (SFOWT) for intermediate water depths. A coupled dynamic model of a wind turbine-tower-floating platform-mooring system is established, and the dynamic response of the platform, tensions in mooring lines, and bending moment at the tower base and blade root under four different mooring configurations are checked. A well-stabilized configuration (i.e., four vertical lines and 12 diagonal lines with an inclination angle of 30°) is selected to study the coupled dynamic responses of SFOWT with broken mooring lines, and in order to keep the safety of SFOWT under extreme sea-states, the pretension of the vertical mooring line has to increase from 1800–2780 kN. Results show that the optimized mooring system can provide larger restoring force, and the SFOWT has a smaller movement response under extreme sea-states; when the mooring lines in the upwind wave direction are broken, an increased motion response of the platform will be caused. However, there is no slack in the remaining mooring lines, and the SFOWT still has enough stability.


Author(s):  
H. K. Jang ◽  
H. C. Kim ◽  
M. H. Kim ◽  
K. H. Kim

Numerical tools for a single floating offshore wind turbine (FOWT) have been developed by a number of researchers, while the investigation of multi-unit floating offshore wind turbines (MUFOWT) has rarely been performed. Recently, a numerical simulator was developed by TAMU to analyze the coupled dynamics of MUFOWT including multi-rotor-floater-mooring coupled effects. In the present study, the behavior of MUFOWT in time domain is described through the comparison of two load cases in maximum operational and survival conditions. A semi-submersible floater with four 2MW wind turbines, moored by eight mooring lines is selected as an example. The combination of irregular random waves, steady currents and dynamic turbulent winds are applied as environmental loads. As a result, the global motion and kinetic responses of the system are assessed in time domain. Kane’s dynamic theory is employed to formulate the global coupled dynamic equation of the whole system. The coupling terms are carefully considered to address the interactions among multiple turbines. This newly developed tool will be helpful in the future to evaluate the performance of MUFOWT under diverse environmental scenarios. In the present study, the aerodynamic interactions among multiple turbines including wake/array effect are not considered due to the complexity and uncertainty.


2012 ◽  
Vol 260-261 ◽  
pp. 273-278 ◽  
Author(s):  
Hai Tao Wu ◽  
Jin Jiang ◽  
Jing Zhao ◽  
Xiao Rong Ye

The paper focuses on a semi-submersible floating offshore wind turbine (FOWT) and analyses its dynamic response in storm condition. The wind load is calculated based on wind block model; the hydrodynamic load is modeled using Potential Theory and Morison Equation. The time-domain dynamic response of the FOWT is simulated by SESAM software with duration of 3 hours. The performance of the FOWT is analyzed based on time history responses and response spectrums. The results show some unique characteristics that differ from offshore platforms and the analysis proofs that the performance is acceptable and the design is reliable.


Author(s):  
Xutian Xue ◽  
Xiaoyong Liu ◽  
Nian-Zhong Chen ◽  
Xifeng Gao

Abstract This paper aims to perform a time-domain mooring fatigue analysis for a Spar-type floating offshore wind turbine operated in the South China Sea. Tension ranges of mooring lines are achieved from a hydrodynamic analysis where the effects of wind, wave and current are considered. A rainflow counting method is used to calculate the number of mooring tension cycles with corresponding ranges. The fatigue lives of mooring lines are then predicted by Palmgren-Miner’s rule according to T-N & S-N curves. A comparison of fatigue lives predicted by T-N & S-N curves-based approaches with/without considering safety factors is made. The results show that the T-N curves-based approach is more conservative than the S-N curves-based approach if safety factors are not considered in the two approaches, while the fatigue lives predicted by both approaches are in general comparable when the safety factors suggested by API and DNVGL are applied in the two approaches. A comparative study of three kinds of R4 grade studless mooring chains with different diameters (2.5-inch, 4-inch, 5-inch) is also conducted and the results show that the design with the 2.5-inch chain does not meet the fatigue requirements.


Author(s):  
Koji Tanaka ◽  
Iku Sato ◽  
Tomoaki Utsunomiya ◽  
Hiromu Kakuya

Abstract In this paper, we describe the analysis of the dynamic response of a 2 MW floating offshore wind turbine (FOWT) at the time of typhoon attack in the actual sea area. In order to introduce floating offshore wind turbine in Asia, it is essential to evaluate the influence of typhoon attack accurately. This FOWT, named HAENKAZE is the only FOWT to operate commercially in areas where typhoons occur. On July 3rd, 2018, the strongest typhoon (Prapiroon) at the installed area of the FOWT since its installation approached the HAENKAZE. The central atmospheric pressure of the typhoon at the closest time was 965 hPa, the maximum instantaneous wind speed at the hub height was 52.2 m/s, and the maximum wave height was 7.1 m. In this paper, the dynamic response of the floating body at the time of typhoon attack is compared for the measured and the simulated values. As a result of the comparison, basically a good agreement has been obtained between the measured and the simulated values except for yaw response, for which the simulated values considerably overestimate the measured values.


Sign in / Sign up

Export Citation Format

Share Document