Dynamic Response and Flow Field Variation of a Floating Collar Under Extreme Wave Condition Using Computational Fluid Dynamics

2021 ◽  
Author(s):  
Songchen Yu ◽  
Peng Li ◽  
Hongde Qin ◽  
Lingyun Xu
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Field ◽  
Dynamic Response ◽  
Field Variation ◽  
Extreme Wave ◽  
Wave Condition ◽  
Wave Propagation Direction ◽  
Heave Motion ◽  
Main Component

Abstract An innovation in aquaculture fisheries around the world is in progress. More and more fish cages have been put into use to meet the needs of human for protein. However, the fish cage shows violent dynamic response and structural destruction while suffering to unpredictable marine environment. As the main component of the cage, floating collar plays an important role in providing buoyancy and ensuring the shape of cage. Thus, the dynamic response of the floating collar and the variation of flow field around the floating collar under extreme wave condition were studied in this paper. Referring to the previous literature, considering the motion form of the floating collar under waves, only the heave and pitch motions of the floating collar were obtained. Results obtained by Computational Fluid Dynamics method were compared with that obtained by potential flow theory. We found that the viscosity of the water has greater influence on heave motion of the floating collar rather than the pitch motion. At the same time, the flow field surrounding the floating collar was analyzed, and an overtopping phenomenon on both sides of the floating collar along the wave propagation direction was observed when the wave was passing through the floating collar.

Construction Ventilation Scheme Optimization of Underground Main Powerhouse Based on CFD

2013 ◽  
Vol 368-370 ◽  
pp. 619-623
Author(s):  
Zhen Liu ◽  
Xiao Ling Wang ◽  
Ai Li Zhang
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Field ◽  
Air Flow ◽  
Scheme Optimization ◽  
Pressure Distributions ◽  
Air Volume ◽  
Computational Fluid Dynamics Cfd ◽  
Traditional Construction ◽  
Ventilation Scheme

For the purpose of avoiding the deficiency of the traditional construction ventilation, the ventilation of the underground main powerhouse is simulated by the computational fluid dynamics (CFD) to optimize ventilation parameters. A 3D unsteady RNG k-ε model is performed for construction ventilation in the underground main powerhouse. The air-flow field and CO diffusion in the main powerhouse are simulated and analyzed. The two construction ventilation schemes are modelled for the main powerhouse. The optimized ventilation scheme is obtained by comparing the air volume and pressure distributions of the different ventilation schemes.

scholarly journals Effect of Doppler flow meter position on discharge measurement in surcharged manholes

2017 ◽  
Vol 77 (3) ◽  
pp. 647-654 ◽  
Author(s):  
Haoming Yang ◽  
David Z. Zhu ◽  
Yanchen Liu
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Field ◽  
Flow Regimes ◽  
Flow Meter ◽  
Flow Meters ◽  
Flow Discharge ◽  
Doppler Flow ◽  
Sewer Systems ◽  
Computational Fluid Dynamics Cfd

Abstract Determining the proper installation location of flow meters is important for accurate measurement of discharge in sewer systems. In this study, flow field and flow regimes in two types of manholes under surcharged flow were investigated using a commercial computational fluid dynamics (CFD) code. The error in measuring the flow discharge using a Doppler flow meter (based on the velocity in a Doppler beam) was then estimated. The values of the corrective coefficient were obtained for the Doppler flow meter at different locations under various conditions. Suggestions for selecting installation positions are provided.

The Effect of Different Turbulence Models on the Emitter Discharge by Using Computational Fluid Dynamics

2013 ◽  
Vol 662 ◽  
pp. 586-590
Author(s):  
Gang Lu ◽  
Qing Song Yan ◽  
Bai Ping Lu ◽  
Shuai Xu ◽  
Kang Li
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Field ◽  
Turbulence Models ◽  
Experimental Results ◽  
Turbulent Model ◽  
Simulation Results ◽  
Rsm Model ◽  
Dynamics Method ◽  
Emitter Discharge

Four types of Super Typhoon drip emitter with trapezoidal channel were selected out for the investigation of the flow field of the channel, and the CFD (Computational Fluid Dynamics) method was applied to simulate the micro-field inside the channel. The simulation results showed that the emitter discharge of different turbulent model is 4%-14% bigger than that of the experimental results, the average discharge deviation of κ-ω and RSM model is 5, 4.5 respectively, but the solving efficiency of the κ-ω model is obviously higher than that of the RSM model.

Numerical Investigation of Thermal Flow Field of Air-Cooled Condensers for Yongshou Plant

2012 ◽  
Vol 248 ◽  
pp. 391-394
Author(s):  
Wen Zhou Yan ◽  
Wan Li Zhao ◽  
Qiu Yan Li
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Speed ◽  
Power Plant ◽  
Flow Field ◽  
Wind Direction ◽  
Rotational Speed ◽  
Power Plants ◽  
Thermal Flow ◽  
Air Cooled Condensers

By using the computational fluid dynamics code, FLUENT, Numerically simulation is investigated for Youngshou power plant. Under the constant ambient temperature, the effects of different wind speed and wind direction on the thermal flow field are qualitatively considered. It was found that when considering about the existing and normally operating power plants, the thermal flow field is more sensitive to wind direction and wind speed. Based on the above results, three improved measures such as: increasing the wind-wall height and accelerating the rotational speed of the fans near the edge of the ACC platform and lengthen or widen the platform are developed to effectively improving the thermal flow field, and enhanced the heat dispersal of ACC.

CFD Leakage Predictions of Unworn and Worn Labyrinth Seals With and Without Tooth Axial Offset

2017 ◽  
Author(s):  
Hasham H. Chougule ◽  
Alexander Mirzamoghadam
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Numerical Modeling ◽  
Steady State ◽  
Flow Field ◽  
Labyrinth Seals ◽  
Small Clearance ◽  
Total Leakage ◽  
Computational Fluid Dynamics Cfd ◽  
Flow Deflection

The objective of this study is to develop a Computational Fluid Dynamics (CFD) based methodology for analyzing and predicting leakage of worn or rub-intended labyrinth seals during operation. The simulations include intended tooth axial offset and numerical modeling of the flow field. The purpose is to predict total leakage through the seal when an axial tooth offset is provided after the intended/unintended rub. Results indicate that as expected, the leakage for the in-line worn land case (i.e. tooth under rub) is higher compared to unworn. Furthermore, the intended rotor/teeth forward axial offset/shift with respect to the rubbed land reduces the seal leakage. The overall leakage of a rubbed seal with axial tooth offset is observed to be considerably reduced, and it can become even less than a small clearance seal designed not to rub. The reduced leakage during steady state is due to a targeted smaller running gap because of tooth offset under the intended/worn land groove shape, higher blockages, higher turbulence and flow deflection as compared to worn seal model without axial tooth offset.

Flow Field and Temperature Field in GaN-MOCVD Reactor Based on Computational Fluid Dynamics Modeling

2018 ◽  
Vol 35 (9) ◽  
pp. 098101
Author(s):  
Shu-Zhe Mei ◽  
Quan Wang ◽  
Mei-Lan Hao ◽  
Jian-Kai Xu ◽  
Hong-Ling Xiao ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Temperature Field ◽  
Flow Field ◽  
Dynamics Modeling ◽  
Computational Fluid Dynamics Modeling ◽  
Mocvd Reactor

Numerical Analysis of the LCS 2 airwake to understand potential interactions during helipcopter operations

2015 ◽  
Author(s):  
Brent S. Paul
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Numerical Analysis ◽  
Flow Field ◽  
Ship Design ◽  
It Impacts ◽  
Flight Envelope ◽  
Computational Fluid Dynamics Cfd ◽  
Potential Interactions ◽  
Flight Deck

The successful integration of aviation capabilities aboard ships is a complex endeavor that must balance ship design with the flight envelope of the helicopter. This can be particularly important when considering air wakes and other flow around the superstructure as it impacts the flight deck. This flow can generate unsteady structures that may interfere with safe helicopter operations. Computational fluid dynamics (CFD) is commonly used to characterize the flow field and assess potential impacts to the flight envelope, which can be used to help define an operating envelope for helicopter operations.

Three-Dimensional Thermo-Elasto-Hydrodynamic Computational Fluid Dynamics Model of a Tilting Pad Journal Bearing—Part II: Dynamic Response

2019 ◽  
Vol 141 (6) ◽  
Author(s):  
Jongin Yang ◽  
Alan Palazzolo
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Dynamic Response ◽  
Journal Bearing ◽  
Three Dimensional ◽  
Static Response ◽  
Damping Coefficients ◽  
Tilting Pad ◽  
Stiffness And Damping ◽  
Tilting Pad Journal Bearing

Part II presents a novel approach for predicting dynamic coefficients for a tilting pad journal bearing (TPJB) using computational fluid dynamics (CFD) and finite element method (FEM), including fully coupled elastic deflection, heat transfer, and fluid dynamics. Part I presented a similarly novel, high fidelity approach for TPJB static response prediction which is a prerequisite for the dynamic characteristic determination. The static response establishes the equilibrium operating point values for eccentricity, attitude angle, deflections, temperatures, pressures, etc. The stiffness and damping coefficients are obtained by perturbing the pad and journal motions about this operating point to determine changes in forces and moments. The stiffness and damping coefficients are presented in “synchronously reduced form” as required by American Petroleum Institute (API) vibration standards. Similar to Part I, an advanced three-dimensional thermal—Reynolds equation code validates the CFD code for the special case when flow Between Pad (BP) regions is ignored, and the CFD and Reynolds pad boundary conditions are made identical. The results show excellent agreement for this validation case. Similar to the static response case, the dynamic characteristics from the Reynolds model show large discrepancies compared with the CFD results, depending on the Reynolds mixing coefficient (MC). The discrepancies are a concern given the key role that stiffness and damping coefficients serve instability and response predictions in rotordynamics software. The uncertainty of the MC and its significant influence on static and dynamic response predictions emphasizes a need to utilize the CFD approach for TPJB simulation in critical machines.

Sign in / Sign up

Export Citation Format

Share Document