Probabilistic Fracture Mechanics Evaluations That Consider Nozzles in the Extended Beltline Region of Reactor Pressure Vessels

2015 ◽  
Author(s):  
Gary L. Stevens ◽  
Mark T. Kirk ◽  
Terry Dickson
Keyword(s):  
Fracture Mechanics ◽  
National Laboratory ◽  
Computer Code ◽  
Nuclear Regulatory Commission ◽  
Pressure Vessels ◽  
Stress Concentrations ◽  
Oak Ridge ◽  
Probabilistic Fracture Mechanics ◽  
Regulatory Issue ◽  
Reactor Pressure

For many years, ASME Section XI committees have discussed the assessment of nozzle penetrations in various flaw evaluations for reactor pressure vessels (RPVs). As summarized in Reference [1], linear elastic fracture mechanics (LEFM) solutions for nozzle penetrations have been in use since the 1970s. In 2013, one of these solutions was adopted into ASME Code, Section XI, Nonmandatory Appendix G (ASME App. G) [2] for use in developing RPV pressure-temperature (P-T) operating limits. That change to ASME App. G was based on compilation of past work [3] and additional evaluations of fracture driving force [4][5]. To establish the P-T limits on RPV operation, consideration should be given to both the RPV shell material with the highest reference temperature as well as regions of the RPV (e.g., nozzles, flange) that contain structural discontinuities. In October 2014, the U.S. Nuclear Regulatory Commission (NRC) highlighted these requirements in Regulatory Issue Summary (RIS) 2014-11 [6]. Probabilistic fracture mechanics (PFM) analyses performed to support pressurized thermal shock (PTS) evaluations using the Fracture Analysis Vessels Oak Ridge (FAVOR) computer code [7] currently evaluate only the RPV beltline shell regions. These evaluations are based on the assumption that the PFM results are controlled by the higher embrittlement characteristic of the shell region rather than the stress concentration characteristic of the nozzle, which does not experience nearly the embrittlement of the shell due to its greater distance from the core. To evaluate this assumption, the NRC and the Oak Ridge National Laboratory (ORNL) performed PFM analyses to quantify the effect of these stress concentrations on the results of the RPV PFM analyses. This paper summarizes the methods and evaluates the results of these analyses.

An Improved Method for Postulating Fabrication Flaws in Reactor Pressure Vessels for Structural Integrity Evaluation

2002 ◽  
Author(s):  
F. A. Simonen ◽  
T. L. Dickson
Keyword(s):  
Fracture Mechanics ◽  
Structural Integrity ◽  
National Laboratory ◽  
Pacific Northwest National Laboratory ◽  
Nuclear Regulatory Commission ◽  
The United States ◽  
Pressure Vessels ◽  
Probabilistic Fracture Mechanics ◽  
Inner Surface ◽  
Reactor Pressure

This paper presents an improved model for postulating fabrication flaws in reactor pressure vessels (RPVs) and for the treatment of measured flaw data by probabilistic fracture mechanics (PFM) codes that are used for structural integrity evaluations. The model used to develop the current pressurized thermal shock (PTS) regulations conservatively postulated that all fabrication flaws were inner-surface breaking flaws. To reduce conservatisms and uncertainties in flaw-related inputs, the United States Nuclear Regulatory Commission (USNRC) has supported research at Pacific Northwest National Laboratory (PNNL) that has resulted in data on fabrication flaws from non-destructive and destructive examinations of actual RPV material. Statistical distributions have been developed to characterize the number and sizes of flaws in the various material regions of a vessel. The regions include the main seam welds, repair welds, base metal of plates and forgings, and the cladding that is applied to the inner surface of the vessel. Flaws are also characterized as being located within the interior of these regions or along the weld fusion lines that join the regions. Flaws are taken that occur at random locations relative to the embrittled inner region of the vessel. The probabilistic fracture mechanics model associates each of the simulated flaw types with the fracture properties of the region being addressed.

Deterministic and Probabilistic Assessments of the Reactor Pressure Vessel Structural Integrity: Benchmark Comparisons

2003 ◽  
Author(s):  
Silvia Turato ◽  
Vincent Venturini ◽  
Eric Meister ◽  
B. Richard Bass ◽  
Terry L. Dickson ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
Pressure Vessel ◽  
Structural Integrity ◽  
Safety Concern ◽  
Nuclear Regulatory Commission ◽  
Reactor Pressure Vessel ◽  
Oak Ridge ◽  
Integrity Assessment ◽  
Probabilistic Fracture Mechanics ◽  
Reactor Pressure

The structural integrity assessment of a nuclear Reactor Pressure Vessel (RPV) during accidental conditions, such as loss-of-coolant accident (LOCA), is a major safety concern. Besides Conventional deterministic calculations to justify the RPV integrity, Electricite´ de France (EDF) carries out probabilistic analyses. Since in the USA the probabilistic fracture mechanics analyses are accepted by the Nuclear Regulatory Commission (NRC), a benchmark has been realized between EDF and Oak Ridge Structural Assessments, Inc. (ORSA) to compare the models and the computational methodologies used in respective deterministic and probabilistic fracture mechanics analyses. Six cases involving two distinct transients imposed on RPVs containing specific flaw configurations (two axial subclad, two circumferential surface-breaking, and two axial surface-braking flaw configurations) were defined for a French vessel. In two separate phases, deterministic and probabilistic, fracture mechanics analyses were performed for these six cases.

NESC-VII: Fracture Mechanics Analyses of WPS Experiments on Large-Scale Cruciform Specimen

2011 ◽  
Author(s):  
Shengjun Yin ◽  
Paul T. Williams ◽  
B. Richard Bass
Keyword(s):  
Fracture Mechanics ◽  
Large Scale ◽  
Structural Integrity ◽  
National Laboratory ◽  
Pressure Vessels ◽  
Cooperative Action ◽  
Oak Ridge ◽  
Integrity Assessment ◽  
Feasibility Test ◽  
Reactor Pressure

This paper describes numerical analyses performed to simulate warm pre-stress (WPS) experiments conducted with large-scale cruciform specimens within the Network for Evaluation of Structural Components (NESC-VII) project. NESC-VII is a European cooperative action in support of WPS application in reactor pressure vessel (RPV) integrity assessment. The project aims in evaluation of the influence of WPS when assessing the structural integrity of RPVs. Advanced fracture mechanics models will be developed and performed to validate experiments concerning the effect of different WPS scenarios on RPV components. The Oak Ridge National Laboratory (ORNL), USA contributes to the Work Package-2 (Analyses of WPS experiments) within the NESC-VII network. A series of WPS type experiments on large-scale cruciform specimens have been conducted at CEA Saclay, France, within the framework of NESC VII project. This paper first describes NESC-VII feasibility test analyses conducted at ORNL. Very good agreement was achieved between AREVA NP SAS and ORNL. Further analyses were conducted to evaluate the NESC-VII WPS tests conducted under Load-Cool-Transient-Fracture (LCTF) and Load-Cool-Fracture (LCF) conditions. This objective of this work is to provide a definitive quantification of WPS effects when assessing the structural integrity of reactor pressure vessels. This information will be utilized to further validate, refine, and improve the WPS models that are being used in probabilistic fracture mechanics computer codes now in use by the NRC staff in their effort to develop risk-informed updates to Title 10 of the U.S. Code of Federal Regulations (CFR), Part 50, Appendix G.

FAVOR Version 16.1: A Computer Code for Fracture Mechanics Analyses of Nuclear Reactor Pressure Vessels

2017 ◽  
Author(s):  
B. Richard Bass ◽  
Paul T. Williams ◽  
Terry L. Dickson ◽  
Hilda B. Klasky
Keyword(s):  
Fracture Mechanics ◽  
Nuclear Reactor ◽  
Computer Code ◽  
The United States ◽  
Pressure Vessels ◽  
Nuclear Industry ◽  
Current Status ◽  
Pressurized Water ◽  
Oak Ridge ◽  
Reactor Pressure

This paper describes the current status of the Fracture Analysis of Vessels, Oak Ridge (FAVOR) computer code which has been under development at Oak Ridge National Laboratory (ORNL), with funding by the United States Nuclear Regulatory Commission (NRC), for over twenty-five years. Including this most recent release, v16.1, FAVOR has been applied by analysts from the nuclear industry and regulators at the NRC to perform deterministic and probabilistic fracture mechanics analyses to review / assess / update regulations designed to insure that the structural integrity of aging, and increasingly embrittled, nuclear reactor pressure vessels (RPVs) is maintained throughout the vessel’s operational service life. Early releases of FAVOR were developed primarily to address the pressurized thermal shock (PTS) issue; therefore, they were limited to applications involving pressurized water reactors (PWRs) subjected to cool-down transients with thermal and pressure loading applied to the inner surface of the RPV wall. These early versions of FAVOR were applied in the PTS Re-evaluation Project to successfully establish a technical foundation that served to better inform the basis of the then-existent PTS regulations to the original PTS Rule (Title 10 of the Code of Federal Regulations, Chapter I, Part 50, Section 50.61, 10CFR 50.61). A later version of FAVOR resulting from this project (version 06.1 - released in 2006) played a major role in the development of the Alternative PTS Rule (10 CFR 50.61.a). This paper describes recent ORNL developments of the FAVOR code; a brief history of verification studies of the code is also included. The 12.1 version (released in 2012) of FAVOR represented a significant generalization over previous releases insofar as it included the ability to encompass a broader range of transients (heat-up and cool-down) and vessel geometries, addressing both PWR and boiling water reactor (BWR) RPVs. The most recent public release of FAVOR, v16.1, includes improvements in the consistency and accuracy of the calculation of fracture mechanics stress-intensity factors for internal surface-breaking flaws; special attention was given to the analysis of shallow flaws. Those improvements were realized in part through implementation of the ASME Section XI, Appendix A, A-3000 curve fits into FAVOR; an overview of the implementation of those ASME curve fits is provided herein. Recent results from an extensive verification benchmarking project are presented that focus on comparisons of solutions from FAVOR versions 16.1 and 12.1 referenced to baseline solutions generated with the commercial ABAQUS code. The verifications studies presented herein indicate that solutions from FAVOR v16.1 exhibit an improvement in predictive accuracy relative to FAVOR v12.1, particularly for shallow flaws.

Verification of Probabilistic Fracture Mechanics Analysis Code for Reactor Pressure Vessel

2021 ◽  
Vol 143 (4) ◽  
Author(s):  
Yinsheng Li ◽  
Genshichiro Katsumata ◽  
Koichi Masaki ◽  
Shotaro Hayashi ◽  
Yu Itabashi ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
Working Group ◽  
Power Plants ◽  
Structural Integrity ◽  
Pressure Vessels ◽  
Irradiation Embrittlement ◽  
Energy Agency ◽  
Probabilistic Fracture Mechanics ◽  
Integrity Assessments ◽  
Reactor Pressure

Abstract Nowadays, it has been recognized that probabilistic fracture mechanics (PFM) is a promising methodology in structural integrity assessments of aged pressure boundary components of nuclear power plants, because it can rationally represent the influencing parameters in their inherent probabilistic distributions without over conservativeness. A PFM analysis code PFM analysis of structural components in aging light water reactor (PASCAL) has been developed by the Japan Atomic Energy Agency to evaluate the through-wall cracking frequencies of domestic reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and pressurized thermal shock (PTS) transients. In addition, efforts have been made to strengthen the applicability of PASCAL to structural integrity assessments of domestic RPVs against nonductile fracture. A series of activities has been performed to verify the applicability of PASCAL. As a part of the verification activities, a working group was established with seven organizations from industry, universities, and institutes voluntarily participating as members. Through one-year activities, the applicability of PASCAL for structural integrity assessments of domestic RPVs was confirmed with great confidence. This paper presents the details of the verification activities of the working group, including the verification plan, approaches, and results.

ORNL Evaluation of Safety Cases for Two Belgian Reactor Pressure Vessels Containing Quasi-Laminar Defects

2017 ◽  
Author(s):  
Hilda B. Klasky ◽  
B. Richard Bass ◽  
Terry L. Dickson ◽  
Sarma B. Gorti ◽  
Randy K. Nanstad ◽  
...  
Keyword(s):  
New York ◽  
Finite Element ◽  
Structural Integrity ◽  
National Laboratory ◽  
Relevant Literature ◽  
Pressure Vessels ◽  
Oak Ridge ◽  
Safety Margins ◽  
Safety Cases ◽  
Reactor Pressure

The Oak Ridge National Laboratory (ORNL) performed a detailed technical review of the 2015 Electrabel (EBL) Safety Cases prepared for the Belgium reactor pressure vessels (RPVs) at Doel 3 and Tihange 2 (D3/T2). The Federal Agency for Nuclear Control (FANC) in Belgium commissioned ORNL to provide a thorough assessment of the existing safety margins against cracking of the RPVs due to the presence of almost laminar flaws found in each RPV. Initial efforts focused on surveying relevant literature that provided necessary background knowledge on the issues related to the quasi-laminar flaws observed in D3/T2 reactors. Next, ORNL proceeded to develop an independent quantitative assessment of the entire flaw population in the two Belgian reactors according to the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, Appendix G, “Fracture Toughness Criteria for Protection Against Failure,” New York (both 1992 and 2004 versions). That screening assessment of the EBL-characterized flaws in D3/T2 used ORNL tools, methodologies, and the ASME Code Case N-848, “Alternative Characterization Rules for Quasi-Laminar Flaws”. Results and conclusions derived from comparisons of the ORNL flaw acceptance assessments of D3/T2 with those from the 2015 EBL Safety Cases are presented in the paper. The ORNL screening analyses identified fewer flaws than EBL that were not compliant with the ASME Section XI (1992) criterion; the EBL criterion imposed additional conservatisms not included in ASME Section XI. Furthermore, ORNL’s application of the updated ASME Section XI (2004) criterion produced only four non-compliant flaws, all due to design-basis loss-of-coolant loading transients. Among the latter, only one flaw remained non-compliant when analyzed using the warm-prestress (WPS) cleavage fracture model typically applied in USA flaw assessments. ORNL’s independent refined analysis of that flaw (#1660, which was also non-compliant in the EBL screening assessments) rendered it compliant when modeled as a more realistic individual quasi-laminar flaw using a 3-dimensional XFEM (eXtended Finite Element Method) approach available in the ABAQUS© finite element code. Taken as a whole, the ORNL-specific results and conclusions confirmed the structural integrity of Doel 3 and Tihange 2 under all design transients with ample margin in the presence of the 16,196 detected flaws.

Verification of Probabilistic Fracture Mechanics Analysis Code PASCAL Through Benchmark Analyses With FAVOR

2017 ◽  
Author(s):  
Yinsheng Li ◽  
Shumpei Uno ◽  
Jinya Katsuyama ◽  
Terry Dickson ◽  
Mark Kirk
Keyword(s):  
Fracture Mechanics ◽  
The United States ◽  
Pressure Vessels ◽  
Japan Atomic Energy Agency ◽  
Energy Agency ◽  
Benchmark Analysis ◽  
Probabilistic Fracture Mechanics ◽  
Pressurized Thermal Shock ◽  
Great Confidence ◽  
Reactor Pressure

A probabilistic fracture mechanics (PFM) analysis code called PASCAL has been developed by the Japan Atomic Energy Agency to evaluate failure frequencies of Japanese reactor pressure vessels (RPVs) during pressurized thermal shock (PTS) events based on Japanese data and Japanese methods published for or provided in Japanese codes and standards. To verify this code, benchmark analyses were carried out using the FAVOR code, which was developed in the United States and has been utilized in nuclear regulation. The results of these analyses confirmed with great confidence the applicability of PASCAL to failure probability and frequency evaluation of Japanese RPVs. An outline of PASCAL, the benchmark analysis conditions and analysis results are reported in this paper.

The Inclusion of Inner Surface Breaking Flaws in Probabilistic Fracture Mechanics Analyses of Reactor Vessels Subjected to Planned Normal Cool-Down Transients

2008 ◽  
Author(s):  
Terry Dickson ◽  
Mark EricksonKirk
Keyword(s):  
Fracture Mechanics ◽  
Nuclear Reactor ◽  
Structural Integrity ◽  
Nuclear Regulatory Commission ◽  
The United States ◽  
Pressure Vessels ◽  
Probabilistic Fracture Mechanics ◽  
Inner Surface ◽  
Regulatory Commission ◽  
Technical Basis

The current regulations, as set forth by the United States Nuclear Regulatory Commission (NRC), to insure that light-water nuclear reactor pressure vessels (RPVs) maintain their structural integrity when subjected to planned reactor startup (heat-up) and shutdown (cool-down) transients are specified in Appendix G to 10 CFR Part 50, which incorporates by reference Appendix G to Section XI of the ASME Code. The technical basis for these regulations contains many aspects that are now broadly recognized by the technical community as being unnecessarily conservative and some plants are finding it increasingly difficult to comply with the current regulations. Consequently, a goal of current NRC research is to derive a technical basis for a risk-informed revision to the current requirements that reduces the conservatism and also is consistent with the methods previously used to develop a risk-informed revision to the regulations for accidental transients such as pressurized thermal shock (PTS). Previous publications have been successful in illustrating potential methods to provide a risk-informed relaxation to the current regulations for normal transients. Thus far, probabilistic fracture mechanics (PFM) analyses have been performed at 60 effective full power years (EFPY) for one of the reactors evaluated as part of the PTS re-evaluation project. In these previous analyses / publications, consistent with the assumptions utilized for this particular reactor in the PTS re-evaluation, all flaws for this reactor were postulated to be embedded. The objective of this paper is to review the analysis results and conclusions from previous publications on this subject and to attempt to modify / generalize these conclusions to include RPVs postulated to contain only inner-surface breaking flaws or a combination of embedded flaws and inner-surface breaking flaws.

Verification of Probabilistic Fracture Mechanics Analysis Code Through Benchmark Analyses

2018 ◽  
Author(s):  
Yinsheng Li ◽  
Shumpei Uno ◽  
Koichi Masaki ◽  
Jinya Katsuyama ◽  
Terry Dickson ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
The United States ◽  
Pressure Vessels ◽  
Irradiation Embrittlement ◽  
Energy Agency ◽  
Probabilistic Fracture Mechanics ◽  
Failure Frequency ◽  
Pressurized Thermal Shock ◽  
Great Confidence ◽  
Reactor Pressure

A probabilistic fracture mechanics (PFM) analysis code PASCAL has been developed by Japan Atomic Energy Agency based on Japanese methods and data to evaluate failure probabilities and failure frequencies of Japanese reactor pressure vessels (RPVs) considering pressurized thermal shock (PTS) events and neutron irradiation embrittlement. To verify PASCAL, we have been performing benchmark analyses by using a PFM code FAVOR which has been developed in the United States and utilized in nuclear regulation. Based on two-year activities, the applicability of PASCAL in failure probability and failure frequency evaluation of Japanese RPVs was confirmed with great confidence. The analysis conditions, approaches and results are given in this paper.

scholarly journals Probabilistic Fracture Mechanics Round Robin Analysis of Reactor Pressure Vessels during Pressurized Thermal Shock

2010 ◽  
Vol 47 (12) ◽  
pp. 1131-1139 ◽  
Author(s):  
Myung Jo JHUNG ◽  
Seok Hun KIM ◽  
Young Hwan CHOI ◽  
Yoon Suk CHANG ◽  
Xiangyuan XU ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
Thermal Shock ◽  
Round Robin ◽  
Pressure Vessels ◽  
Probabilistic Fracture Mechanics ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure
Sign in / Sign up

Export Citation Format

Share Document