Standard mirror mounting deformation analysis of large diameter optical interference measurement system

Author(s):  
Feng Dang ◽  
Xueliang Zhu
2014 ◽  
Vol 494-495 ◽  
pp. 1274-1277
Author(s):  
Kan Liu ◽  
Hao You

This article introduces a measurement system based on LabVIEW used for optical interference fringe on micro-fluidic chips. This system mainly uses cameras to capture real-time images of wedge interference fringe on micro-fluidic chips, then the collected images will be binarized by LabVIEW. The processed images will be divided by zone , determine the flatness and gap thickness of the micro-fluidic chips by interference fringes with different directions of deflection and numbers. Finally, feedback from measured data will be used to adjust the flatness and gap thickness of micro-fluidic chips in order to meet the requirement of tests.


2020 ◽  
Vol 10 (21) ◽  
pp. 7579
Author(s):  
Zhaoyao Wang ◽  
Ruigeng Hu ◽  
Hao Leng ◽  
Hongjun Liu ◽  
Yifan Bai ◽  
...  

The displacement of monopile supporting offshore wind turbines needs to be strictly controlled, and the influence of local scour can not be ignored. Using p–y curves to simulate the pile–soil interaction and the finite difference method to calculate iteratively, a numerical frame for analysis of lateral loaded pile was discussed and then verified. On the basis of the field data from Dafeng Offshore Wind Farm in Jiangsu Province, the local scour characteristics of large diameter monopile were concluded, and a new method of considering scour effect applicable to large diameter monopile was put forward. The results show that, for scour of large diameter monopiles, there was no obvious scour pit, but local erosion and deposition. Under the test conditions, the displacement errors between the proposed and traditional method were 46.4%. By the proposed method, the p–y curves of monopile considering the scour effect were obtained through ABAQUS, and the deformation of large diameter monopile under scour was analyzed by the proposed frame. The results show that, with the increase of scour depth, the horizontal displacement of the pile head increases nonlinearly, the depth of rotation point moves downward, and both of the changes are related to the load level. Under the test conditions, the horizontal displacement of the pile head after scour could reach 1.4~3.6 times of that before scour. Finally, for different pile parameters, the pile head displacement was compared, and further, the susceptibility to scour was quantified by a proposed concept of scour sensitivity. The analysis indicates that increasing pile length is a more reasonable way than pile diameter and wall thickness to limit the scour effect on the displacement of large diameter pile.


2014 ◽  
Vol 716-717 ◽  
pp. 978-982
Author(s):  
Xiao Min Hou ◽  
Shao Jie Wei ◽  
Xin Lian

Focused on DBBC(digital baseband converter) which is used in interferencemeasurement system, two typical digital baseband converting methods are introduced. Using parallel structure and poly-phase structure to improve the orthogonal mixing method, the method based on parallel conversion is proposed. Combining the efficient PFB(poly-phase filter bank) channelization with theflexible orthogonal mixing , the method combining PFB channelization with the orthogonal mixing is proposed. This method can realize full spectrum received.Considering the efficiency and power, the method combining PFB channelization with the orthogonal mixing is better.


2012 ◽  
Vol 20 (8) ◽  
pp. 8598 ◽  
Author(s):  
Liang Lu ◽  
Jingyu Yang ◽  
Longhua Zhai ◽  
Rui Wang ◽  
Zhigang Cao ◽  
...  

2021 ◽  
Vol 44 (4) ◽  
pp. 1-23
Author(s):  
Arumugam Balasubramaniam

In this lecture the interpretations of fully instrumented tests embankments and their role in the development of appropriate ground improvement techniques for highways, motorways and airfields on soft clay deposits is illustrated through well documented case studies in Bangkok, Thailand and Muar Flat Site in Kuala Lumpur. For the Bangkok Plain and with sand backfills the performance of embankments with different schemes of vertical drains was evaluated over a period of 25 years. Aspects such as recharging effects due to the drains, inadequate measures in maintaining vacuum during vacuum applications and possible hydraulic connections with large diameter drains are discussed. For the Muar test embankments, the role of fill strength in residual soil embankment and the field deformation analysis in separating consolidation settlement from immediate settlement and creep settlements is presented. Novel interpretations of settlement from pore pressure dissipations, secondary settlement from field measurements and decay of lateral deformation rate with time were also made.


Sign in / Sign up

Export Citation Format

Share Document