scholarly journals Nonparabolic marching algorithm for sound field calculation in the inhomogeneous ocean waveguide

1994 ◽  
Vol 96 (5) ◽  
pp. 3343-3343
Author(s):  
A. Voronovich
1989 ◽  
Vol 86 (S1) ◽  
pp. S20-S20 ◽  
Author(s):  
Chankil Lee ◽  
Intaek Kim ◽  
Paul J. Benkeser

2021 ◽  
Vol 9 (9) ◽  
pp. 934
Author(s):  
Alena Zakharenko ◽  
Mikhail Trofimov ◽  
Pavel Petrov

Numerous sound propagation models in underwater acoustics are based on the representation of a sound field in the form of a decomposition over normal modes. In the framework of such models, the calculation of the field in a range-dependent waveguide (as well as in the case of 3D problems) requires the computation of normal modes for every point within the area of interest (that is, for each pair of horizontal coordinates x,y). This procedure is often responsible for the lion’s share of total computational cost of the field simulation. In this study, we present formulae for perturbation of eigenvalues and eigenfunctions of normal modes under the water depth variations in a shallow-water waveguide. These formulae can reduce the total number of mode computation instances required for a field calculation by a factor of 5–10. We also discuss how these formulae can be used in a combination with a wide-angle mode parabolic equation. The accuracy of such combined model is validated in a series of numerical examples.


2017 ◽  
Vol 25 (01) ◽  
pp. 1650021 ◽  
Author(s):  
Chuan-Xiu Xu ◽  
Sheng-Chun Piao ◽  
Shi-E Yang ◽  
Hai-Gang Zhang ◽  
Li Li

In ocean waveguides, the ocean bottom is usually approximated as a half-space. Thus, there exist no reflection waves at the half-space bottom and condition of radiation at infinity should be satisfied. In numerical solutions like parabolic equation methods, the depth domain has to be truncated, which can generate reflection waves from the truncated ocean bottom. To reduce the effect of reflection waves and to simulate an unbounded ocean bottom accurately, an artificial absorbing layer (ABL) was used. As was demonstrated, an ABL meets well the demand of accuracy in sound field calculation. However, both the sea-bottom layer and the artificial absorbing layer are needed to be set quite thick by using an ABL technique. Fortunately, a PML with several wavelengths can keep similar calculation accuracy with an ABL with dozens of wavelengths. In this paper, perfectly matched layer (PML) techniques for three parabolic equation (PE) models RAM, RAMS and a three-dimensional PE model in underwater acoustics are presented. A key technique of PML “complex coordinate stretching” is used to truncate unbounded domains and to simulate infinity radiation conditions instead of the ABL in those models. The numerical results illustrate that the PML technique is of higher efficiency than the ABL technique at truncating the infinity domain with minimal spurious reflections in PE models.


2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Haisen Li ◽  
Jingxin Ma ◽  
Jianjun Zhu ◽  
Baowei Chen

The Khokhlov–Zabolotskaya–Kuznetsov (KZK) equation has been widely used in the simulation and calculation of nonlinear sound fields. However, the accuracy of KZK equation reduced due to the deflection of the direction of the sound beam when the sound beam is inclined incidence. In this paper, an equivalent sound source model is proposed to make the calculation direction of KZK calculation model consistent with the sound propagation direction after acoustic refraction, so as to improve the accuracy of sound field calculation under the inclined incident conditions. The theoretical research and pool experiment verify the feasibility and effectiveness of the proposed method.


1996 ◽  
Vol 04 (04) ◽  
pp. 399-423 ◽  
Author(s):  
A. VORONOVICH

An algorithm is presented for calculating sound field in the inhomogeneous ocean waveguide. It does not involve parabolic approximation and can be considered as principally exact (at least for 2D inhomogeneities of the sound speed field). On the other hand, it is “marching” and can be easily implemented as a computer code (note, that marching in this case proceeds in “backward” direction, i.e. towards the source). Those features of the code are similar to couple mode algorithm (COUPLE) developed originally by R. Evans. The principal difference is that suggested code does not assume piecewise constant approximation of the waveguide properties with respect to horizontal coordinates. As a result, the horizontal steps of marching can be increased significantly. The estimate of the efficiency of the approach as compared to stepwise couple modes method is given. The results of the code testing with the help of benchmark problem as well as calculation of sound propagation through a strong inhomogeneity formed by the sub-arctic front are presented. The present version of the code can be used to calculate entries of scattering matrix (S-matrix) for the ocean waveguide as well as travel times of different modes (derivatives of phases of corresponding entries with respect to frequency). A priori restrictions on S-matrix (reciprocity and energy conservation) are also given, and some objective quantitative criterion of the accuracy of the numerical algorithms formulated in terms of S-matrix is suggested.


2010 ◽  
Vol 31 (2) ◽  
pp. 129-136
Author(s):  
Bo Yang ◽  
Chao Sun ◽  
Yixin Yang

2020 ◽  
Vol 12 (9) ◽  
pp. 168781402096063
Author(s):  
Xiaorui Cheng ◽  
Tianpeng Li ◽  
Peng Wang

In order to study the influence of blade outlet cutting width on hydrodynamic excitation noise of the centrifugal pump with low specific speed, five schemes are used to perform V-shaped cutting on the outlet of the impeller blade are studied in this study. Based on Lighthill acoustic analogy, combining computational fluid dynamics and computational acoustics, RNG k-ε turbulence model is used to calculate internal unsteady flow field of the centrifugal pump, and the acoustic solution is based on the flow field calculation. The results show that the pressure pulsation can reflect the sound pressure level to a certain extent; proper cutting of the blade outlet can improve the flow state of the rear cavity of the centrifugal pump and make the flow uniform; the V-shaped cutting of the blade outlet also can reduce the dynamic and static interference between the impeller outlet and the volute tongue, effectively reducing the sound pressure level of the internal sound field, when the blade outlet cutting width is a/ b2 = 33.33%, the inlet sound pressure level and the outlet sound pressure level are decreased by 4.8% and 7.2%, respectively. In terms of internal sound field, the sound pressure level at the outlet of the pump is obviously higher than that at the inlet.


2021 ◽  
Vol 9 (8) ◽  
pp. 807
Author(s):  
Lanyue Zhang ◽  
Jia Wang ◽  
Desen Yang ◽  
Bo Hu ◽  
Di Wu

The equivalent source method is widely applied to study structural acoustic radiation in an underwater environment. However, there is still uncertainty in arranging the equivalent source, and the current mainstream configuration method needs a large number of equivalent sources, limiting its practical applicability. In this paper, an equivalent source configuration method that is simple, effective, and easy to implement, and which based on a tradeoff between the ill condition of the transfer matrix and the adequacy of the simulated structure’s radiated sound field, is proposed. The optimization method can derive the appropriate positions and quantity of monopole equivalent sources simultaneously. The method does not yield an optimal solution in a strict mathematical sense but provides satisfactory results compared with those obtained by uniformly distributed equivalent sources. Numerical simulation results showed that the optimization method derives accurate sound field calculation results with a relatively small number of equivalent sources, significantly reducing the number of subsequent calculations needed. Finally, the experiments conducted with a cylindrical shell structure verified the validity and practicality of the proposed method.


Sign in / Sign up

Export Citation Format

Share Document