Acoustic radiation force on a particle in ultrasonic standing wave fields driven by a piezoelectric plate

2015 ◽  
Vol 137 (4) ◽  
pp. 2314-2314
Author(s):  
Bart Lipkens ◽  
Ben Ross-Johnsrud ◽  
Minghe Liu ◽  
Yurii Ilinskii ◽  
Evgenia Zabolotskaya
Keyword(s):  
Standing Wave ◽  
Acoustic Radiation ◽  
Piezoelectric Plate ◽  
Radiation Force ◽  
Acoustic Radiation Force ◽  
Wave Fields ◽  
Ultrasonic Standing Wave

scholarly journals Investigation into the Effect of Acoustic Radiation Force and Acoustic Streaming on Particle Patterning in Acoustic Standing Wave Fields

Sensors ◽  
2017 ◽  
Vol 17 (7) ◽  
pp. 1664 ◽  
Author(s):  
Shilei Liu ◽  
Yanye Yang ◽  
Zhengyang Ni ◽  
Xiasheng Guo ◽  
Linjiao Luo ◽  
...  
Keyword(s):  
Standing Wave ◽  
Acoustic Radiation ◽  
Acoustic Streaming ◽  
Radiation Force ◽  
Acoustic Radiation Force ◽  
Wave Fields ◽  
Acoustic Standing Wave

scholarly journals Mathematical modeling and experimental study on solid–liquid suspension separation in ultrasonic standing wave field

2021 ◽  
pp. 146134842110229
Author(s):  
Yajing Wang ◽  
Liqun Wu ◽  
Yaxing Wang ◽  
Yafei Fan
Keyword(s):  
Standing Wave ◽  
Sound Pressure ◽  
Acoustic Radiation ◽  
Sound Field ◽  
Radiation Force ◽  
High Energy ◽  
Factors Affecting ◽  
Liquid Suspension ◽  
Ultrasonic Standing Wave ◽  
Solid Liquid

A new method of removing waste chips is proposed by focusing on the key factors affecting the processing quality and efficiency of high energy beams. Firstly, a mathematical model has been established to provide the theoretical basis for the separation of solid–liquid suspension under ultrasonic standing wave. Secondly, the distribution of sound field with and without droplet has been simulated. Thirdly, the deformation and movement of droplets are simulated and tested. It is found that the sound pressure around the droplet is greater than the sound pressure in the droplet, which can promote the separation of droplets and provide theoretical support for the ultrasonic suspension separation of droplet; under the interaction of acoustic radiation force, surface tension, adhesion, and static pressure, the droplet is deformed so that the gas fluid around the droplet is concentrated in the center to achieve droplet separation, and the droplet just as a flat ball with a central sag is stably suspended in the acoustic wave node.

PARTICLE TRANSPORT ACROSS BI-FLUID INTERFACE USING ACOUSTIC RADIATION FORCE

2010 ◽  
Vol 24 (13) ◽  
pp. 1397-1400
Author(s):  
YANG LIU ◽  
KIAN-MENG LIM
Keyword(s):  
Standing Wave ◽  
Flow System ◽  
Acoustic Radiation ◽  
Radiation Force ◽  
Acoustic Radiation Force ◽  
The Other ◽  
Acoustic Properties ◽  
Micro Particles ◽  
Acoustic Standing Wave ◽  
Micro Flow

A bi-fluid micro-flow system is proposed for separating particles from its original solvent and re-diluting them into another solvent simultaneously. In this micro-flow system, two different miscible solvents flow parallel to each other through a 2-inlet-2-outlet micro-channel, where an acoustic standing wave is set up. Due to the differences in acoustic properties of these solvents, the pressure node of the acoustic wave is shifted from the middle line of the channel. Under the action of the acoustic radiation force, particles with positive ϕ-factors are extracted from their original solvent and re-suspended into the other solvent, wherein the pressure node resides. Particles suspended in the new solvent are collected at one of the two outlets downstream. Experiments were conducted on a prototype using two aqueous solutions: deionized water and 40% glycerin aqueous solution with polystyrene micro-particles. The results show that under the action of the acoustic standing wave, most of the particles were successfully transported from its original solvent to the other solvent and collected at the outlet.

Sign in / Sign up

Export Citation Format

Share Document