Discriminative Analyses of Various Upper Body Tests in Professional Rugby-League Players

2006 ◽  
Vol 1 (4) ◽  
pp. 347-360 ◽  
Author(s):  
Daniel G. Baker ◽  
Robert U. Newton
Keyword(s):  
Bench Press ◽  
Rugby League ◽  
Maximum Power ◽  
Upper Body ◽  
Muscle Endurance ◽  
Maximal Strength ◽  
Body Strength ◽  
Upper Body Strength

Purpose:To examine the upper body strength, speed, power, and strength-endurance of rugby-league players of different ranks. These data could provide information pertinent to the importance of these factors for different grades of rugby league and for positional groups in those different grades.Methods:Sixty rugby-league players, 20 participants each in the elite, national first-division league (NRL), state-based second-division league (SRL), and intracity third-division league (CRL), served as subjects. Maximal upper body strength, power, speed, and muscle endurance were assessed using the bench-press exercise.Results:The NRL players were significantly stronger (141.4 ± 15.4 kg) than SRL (126.6 ± 13.1 kg, ES = 1.033) and CRL (108.1 kg ± 11.6, ES = 2.458) and more powerful (NRL = 680 ± 99 W) than SRL (591 ± 72 W, ES = 1.037) and CRL players (521 ± 71 W, ES = 1.867). The differences in speed (NRL = 345 ± 31 W, SRL = 319 ± 29 W, CRL = 303 ± 29 W; ES = 0.884 and 1.409, respectively) and strength-endurance (NRL = 36 ± 7 reps, SRL = 32 reps ± 7, CRL = 24 ± 5 reps; ES = 0.521 and 1.984, respectively) were not as pronounced.Conclusions:Of the tests undertaken, maximal strength best describes players who attain NRL ranking. Maximum power and strength-endurance were also strong descriptors of attainment of NRL level. Upper body speed appears less likely to strongly discriminate between players who attain NRL level and those who do not. These results tended to hold true across the different team positional groupings.

The Influence of Upper-Body Strength on Flat-Water Sprint Kayak Performance in Elite Athletes

2014 ◽  
Vol 9 (4) ◽  
pp. 707-714 ◽  
Author(s):  
Mark R. McKean ◽  
Brendan J. Burkett
Keyword(s):  
Bench Press ◽  
Elite Athletes ◽  
Upper Body ◽  
Dry Land ◽  
Performance Time ◽  
Body Strength ◽  
Upper Body Strength ◽  
And Performance ◽  
Performance Times ◽  
The Relationship

Dry-land strength training is a fundamental component for elite kayak performance. The aims of this research were 3-fold: 1st, to determine the relationship between performance time and strength scores for elite kayakers; 2nd, to identify how strength changes (gains or losses) over 3 training y relate with changes in performance time for elite kayakers; and 3rd, to compare the progression in performance times for elite athletes with the top 3 performers from the national championships. The performance data for 15 elite male and 10 elite female kayakers were collected over 2 y. This group was reduced to 9 men and 8 women in the 3rd and final year. There were direct and significant correlations between strength scores and performance times across the 3 y. Bench-press 1RM increased by 34.8% for men and 42.3% for women. Over the 3 seasons, mean 1000-m time decreased by approximately 4.8%, 500-m times decreased by 7.3% (women), and 200-m times decreased by 9.1%. The women’s 500-m changed from 11.9% difference from medalists to within 1.1% during the 3 y. During the 3 y of this study a change in 1-repetitionmaximum (1RM) bench press of 13% for men and 6.5% in women coincided with a change in performance times of 1%. For 1RM pull-up a change of 10% in men and 2.3% in women coincided with a change in performance times of 1%.

Predictors of Repeated High-Intensity-Effort Ability in Rugby League Players

2015 ◽  
Vol 10 (6) ◽  
pp. 718-724 ◽  
Author(s):  
Tim J. Gabbett ◽  
Aaron J. Wheeler
Keyword(s):  
Body Mass ◽  
High Intensity ◽  
Rugby League ◽  
Upper Body ◽  
Second Grade ◽  
Muscle Endurance ◽  
Ability Test ◽  
Body Muscle ◽  
Full Contact ◽  
Body Strength

Purpose: To investigate the relationship between repeated high-intensity-effort (RHIE) ability and selected physical qualities in rugby league players. Methods: Sixteen rugby league players underwent measurements of upper-body strength (4-repetition-maximum [4RM] bench press, weighted chin-up, weighted dips), upper-body muscle endurance (body-mass maximum-repetition chin-up, body-mass maximum-repetition dips), lower-body strength (4RM squat), estimated maximal aerobic power (multistage fitness test), and RHIE ability. The RHIE-ability test consisted of 1 × 10-m sprint, 3 × full-contact 1-on-1 tackling efforts, and a 30-m jog recovery. Players performed 4 repetitions of the test, with each repetition completed in 40 second. During the RHIE test, player speed was evaluated with a 10-m sprint effort while the movement of players was recorded using a wearable microtechnology device. 2D Player Load was used to quantify the collision component of the test. Results: Speed decrement was lower for the first- (−2.4% ± 1.0%) than the second-grade (−4.7% ± 2.1%) players. Players with greater initial speed had a higher average speed over the 4 sprints (r = .75), while players with greater maximum-repetition dips maintained a higher 2D Player Load (r = .76). Conclusions: These findings demonstrate a relationship between well-developed acceleration and upper-body muscle-endurance qualities and RHIE ability in rugby league players. Training programs designed to develop acceleration and upper-body muscle endurance are likely to improve RHIE ability.

scholarly journals Effect of Five Bench Inclinations on the Electromyographic Activity of the Pectoralis Major, Anterior Deltoid, and Triceps Brachii during the Bench Press Exercise

2020 ◽  
Vol 17 (19) ◽  
pp. 7339
Author(s):  
David Rodríguez-Ridao ◽  
José A. Antequera-Vique ◽  
Isabel Martín-Fuentes ◽  
José M. Muyor
Keyword(s):  
Bench Press ◽  
Pectoralis Major ◽  
Upper Body ◽  
Emg Activity ◽  
Electromyographic Activity ◽  
Activity Levels ◽  
Triceps Brachii ◽  
Body Strength ◽  
Upper Body Strength ◽  
Anterior Deltoid

The bench press exercise is one of the most used for training and for evaluating upper-body strength. The aim of the current study was to evaluate the electromyographic (EMG) activity levels of the pectoralis major (PM) in its three portions (upper portion, PMUP, middle portion, PMMP, and lower portion, PMLP), the anterior deltoid (AD), and the triceps brachii (TB) medial head during the bench press exercise at five bench angles (0°, 15°, 30°, 45°, and 60°). Thirty trained adults participated in the study. The EMG activity of the muscles was recorded at the aforementioned inclinations at 60% of one-repetition maximum (1RM). The results showed that the maximal EMG activity for PMUP occurred at a bench inclination of 30°. PMMP and PMLP showed higher EMG activity at a 0° bench inclination. AD had the highest EMG activity at 60°. TB showed similar EMG activities at all bench inclinations. In conclusion, the horizontal bench press produces similar electromyographic activities for the pectoralis major and the anterior deltoid. An inclination of 30° produces greater activation of the upper portion of the pectoralis major. Inclinations greater than 45° produce significantly higher activation of the anterior deltoid and decrease the muscular performance of the pectoralis major.

scholarly journals Comparing periodised protocols for the maintenance of strength and power in resistance-trained women

2017 ◽  
Vol 6 (2) ◽  
Author(s):  
Kok Lian Yee
Keyword(s):  
Body Mass ◽  
Repeated Measures ◽  
Bench Press ◽  
Upper Body ◽  
Lower Body ◽  
Power Training ◽  
Body Strength ◽  
Upper Body Strength ◽  
Lower Body Strength ◽  
Training Programmes

Purpose: The purpose of the study was to compare the effects of daily undulating periodisation (DUP) and session undulating periodisation (SUP) for maintaining strength and power over a 3-wk period in a group of resistance-trained women.  DUP comprised one session each of strength and power training while DUP combined both strength and power training within each session.  Both training programmes were equalised for training volume and intensity.  Methods: Sixteen resistance-trained women were pre-tested for body mass, mid-arm and mid-thigh girths, one-repetition maximum (1 RM) dynamic squat (SQ) and bench press (BP), and  power during countermovement jumps (CMJ) and bench press throws (BPT). The 1 RM SQ and BP data were used to assign the participants into groups for twice a week training.  Results:  A two-way (group x time) analysis of variance (ANOVA) with repeated measures for time found no significant changes in body mass, mid-arm girth, 1 RM BP and SQ, and BPT and CMJ power for both groups.  However, significant changes in mid-thigh girth were found (F1, 13 = 5.733, p = 0.032). Pooled BP data indicated improved upper body strength (BP: F1, 13 = 6.346, p = 0.025) and decreased CMJ power (p = 0.016).  Conclusions:  Both DUP and SUP programmes increased upper-body strength and maintained lower-body strength adequately across a 3-wk phase probably because the participants were weaker in the upper-body and the lower-body had a reduced capacity for strength adaptations and improvements.

scholarly journals What Dose of Caffeine to Use: Acute Effects of 3 Doses of Caffeine on Muscle Endurance and Strength

2020 ◽  
Vol 15 (4) ◽  
pp. 470-477 ◽  
Author(s):  
Jozo Grgic ◽  
Filip Sabol ◽  
Sandro Venier ◽  
Ivan Mikulic ◽  
Nenad Bratkovic ◽  
...  
Keyword(s):  
Linear Trend ◽  
Upper Body ◽  
Muscle Endurance ◽  
Placebo Control ◽  
Lower Body ◽  
Repetition Maximum ◽  
Body Muscle ◽  
Body Strength ◽  
Upper Body Strength ◽  
Lower Body Strength

Purpose: To explore the effects of 3 doses of caffeine on muscle strength and muscle endurance. Methods: Twenty-eight resistance-trained men completed the testing sessions under 5 conditions: no-placebo control, placebo control, and with caffeine doses of 2, 4, and 6 mg·kg−1. Muscle strength was assessed using the 1-repetition-maximum test; muscle endurance was assessed by having the participants perform a maximal number of repetitions with 60% 1-repetition maximum. Results: In comparison with both control conditions, only a caffeine dose of 2 mg·kg−1 enhanced lower-body strength (d = 0.13–0.15). In comparison with the no-placebo control condition, caffeine doses of 4 and 6 mg·kg−1 enhanced upper-body strength (d = 0.07–0.09) with a significant linear trend for the effectiveness of different doses of caffeine (P = .020). Compared with both control conditions, all 3 caffeine doses enhanced lower-body muscle endurance (d = 0.46–0.68). For upper-body muscle endurance, this study did not find significant effects of caffeine. Conclusions: This study revealed a linear trend between the dose of caffeine and its effects on upper-body strength. The study found no clear association between the dose of caffeine and the magnitude of its ergogenic effects on lower-body strength and muscle endurance. From a practical standpoint, the magnitude of caffeine’s effects on strength is of questionable relevance. A low dose of caffeine (2 mg·kg−1)—for an 80-kg individual, the dose of caffeine in 1–2 cups of coffee—may produce substantial improvements in lower-body muscle endurance with the magnitude of the effect being similar to that attained using higher doses of caffeine.

scholarly journals Push-Ups are Able to Predict the Bench Press 1-RM and Constitute an Alternative for Measuring Maximum Upper Body Strength Based on Load-Velocity Relationships

2020 ◽  
Vol 73 (1) ◽  
pp. 7-18
Author(s):  
Roland van den Tillaar ◽  
Nick Ball
Keyword(s):  
Muscle Activation ◽  
Bench Press ◽  
Biceps Brachii ◽  
Low Cost ◽  
Body Height ◽  
Upper Body ◽  
Body Strength ◽  
Velocity Relationship ◽  
Upper Body Strength ◽  
Push Up

AbstractThe aims of this study were firstly to compare the similarity in upper-body muscle activation between the bench press and push-up at similar loads, and secondly to establish a 1-RM prediction equation between the two exercises based upon the load-velocity relationship. Twenty resistance-trained male athletes (age 22.5 ± 5.24 years, body mass 83.7 ± 10.7 kg, body height 1.80 ± 0.06 m) performed push-ups and bench presses with four different loads. Push-ups were performed without a weight vest and with a 10-20-30 kg weight vest. Bench presses were performed at 50-80% of athletes’ assumed 1 repetition max (1-RM) in 10 kg steps, while a linear encoder measured performance during the exercises. A load-velocity relationship was established as a product of the load and velocity for the push-up and bench press per participant and the equation was used to establish a predicted 1-RM. Mean muscle activation of eight upper body muscles was recorded for each exercise and each load. The main findings of this study demonstrate an extremely large association between the predicted 1-RM loads performed with the push-up and bench press (r = 0.93) in experienced resistance trained men. Furthermore, most muscles showed similar activations between the two exercises with the different loads except the deltoid and biceps brachii muscles. It may be concluded that it is possible to predict a cross-over 1-RM between the two exercises based upon the load-velocity relationship in each exercise, and that training push-ups largely targets the same muscles as the bench press except the deltoid and biceps muscles. For coaches and athletes, the use of this method is a low cost and time-effective alternative for standard 1-RM bench press testing to predict maximal upper body strength.

Sign in / Sign up

Export Citation Format

Share Document