scholarly journals Effect of Start-Up Strategies and Electrode Materials on Carbon Dioxide Reduction on Biocathodes

2017 ◽  
Vol 84 (4) ◽  
Author(s):  
Soroush Saheb-Alam ◽  
Abhijeet Singh ◽  
Malte Hermansson ◽  
Frank Persson ◽  
Anna Schnürer ◽  
...  
Keyword(s):  
Microbial Community ◽  
Electrode Materials ◽  
Microbial Community Composition ◽  
Community Analysis ◽  
Microbial Community Analysis ◽  
Cathodic Current ◽  
Content Type ◽  
Term Operation ◽  
Start Up

ABSTRACT The enrichment of CO 2 -reducing microbial biocathodes is challenging. Previous research has shown that a promising approach could be to first enrich bioanodes and then lower the potential so the electrodes are converted into biocathodes. However, the effect of such a transition on the microbial community on the electrode has not been studied. The goal of this study was thus to compare the start-up of biocathodes from preenriched anodes with direct start-up from bare electrodes and to investigate changes in microbial community composition. The effect of three electrode materials on the long-term performance of the biocathodes was also investigated. In this study, preenrichment of acetate-oxidizing bioanodes did not facilitate the start-up of biocathodes. It took about 170 days for the preenriched electrodes to generate substantial cathodic current, compared to 83 days for the bare electrodes. Graphite foil and carbon felt cathodes produced higher current at the beginning of the experiment than did graphite rods. However, all electrodes produced similar current densities at the end of the over 1-year-long study (2.5 A/m 2 ). Methane was the only product detected during operation of the biocathodes. Acetate was the only product detected after inhibition of the methanogens. Microbial community analysis showed that Geobacter sp. dominated the bioanodes. On the biocathodes, the Geobacter sp. was succeeded by Methanobacterium spp., which made up more than 80% of the population. After inhibition of the methanogens, Acetobacterium sp. became dominant on the electrodes (40% relative abundance). The results suggested that bioelectrochemically generated H 2 acted as an electron donor for CO 2 reduction. IMPORTANCE In microbial electrochemical systems, living microorganisms function as catalysts for reactions on the anode and/or the cathode. There is a variety of potential applications, ranging from wastewater treatment and biogas generation to production of chemicals. Systems with biocathodes could be used to reduce CO 2 to methane, acetate, or other high-value chemicals. The technique can be used to convert solar energy to chemicals. However, enriching biocathodes that are capable of CO 2 reduction is more difficult and less studied than enriching bioanodes. The effect of different start-up strategies and electrode materials on the microbial communities that are enriched on biocathodes has not been studied. The purpose of this study was to investigate two different start-up strategies and three different electrode materials for start-up and long-term operation of biocathodes capable of reducing CO 2 to valuable biochemicals.

scholarly journals Impact of Substratum Surface on Microbial Community Structure and Treatment Performance in Biological Aerated Filters

2013 ◽  
Vol 80 (1) ◽  
pp. 177-183 ◽  
Author(s):  
Lavane Kim ◽  
Eulyn Pagaling ◽  
Yi Y. Zuo ◽  
Tao Yan
Keyword(s):  
Microbial Community ◽  
Microbial Communities ◽  
Bacterial Species ◽  
Community Analysis ◽  
Microbial Community Analysis ◽  
Rrna Gene ◽  
Content Type ◽  
Property Change ◽  
And Control ◽  
Start Ups

ABSTRACTThe impact of substratum surface property change on biofilm community structure was investigated using laboratory biological aerated filter (BAF) reactors and molecular microbial community analysis. Two substratum surfaces that differed in surface properties were created via surface coating and used to develop biofilms in test (modified surface) and control (original surface) BAF reactors. Microbial community analysis by 16S rRNA gene-based PCR-denaturing gradient gel electrophoresis (DGGE) showed that the surface property change consistently resulted in distinct profiles of microbial populations during replicate reactor start-ups. Pyrosequencing of the bar-coded 16S rRNA gene amplicons surveyed more than 90% of the microbial diversity in the microbial communities and identified 72 unique bacterial species within 19 bacterial orders. Among the 19 orders of bacteria detected,BurkholderialesandRhodocyclalesof theBetaproteobacteriaclass were numerically dominant and accounted for 90.5 to 97.4% of the sequence reads, and their relative abundances in the test and control BAF reactors were different in consistent patterns during the two reactor start-ups. Three of the five dominant bacterial species also showed consistent relative abundance changes between the test and control BAF reactors. The different biofilm microbial communities led to different treatment efficiencies, with consistently higher total organic carbon (TOC) removal in the test reactor than in the control reactor. Further understanding of how surface properties affect biofilm microbial communities and functional performance would enable the rational design of new generations of substrata for the improvement of biofilm-based biological treatment processes.

scholarly journals Microbial Community Composition Affects Soil Fungistasis

2003 ◽  
Vol 69 (2) ◽  
pp. 835-844 ◽  
Author(s):  
Wietse de Boer ◽  
Patrick Verheggen ◽  
Paulien J. A. Klein Gunnewiek ◽  
George A. Kowalchuk ◽  
Johannes A. van Veen
Keyword(s):  
Microbial Community ◽  
Community Composition ◽  
Bacterial Community Composition ◽  
Microbial Community Composition ◽  
Fusarium Culmorum ◽  
Community Analysis ◽  
Microbial Community Analysis ◽  
Carbon Limitation ◽  
Soil Fungistasis

ABSTRACT Most soils inhibit fungal germination and growth to a certain extent, a phenomenon known as soil fungistasis. Previous observations have implicated microorganisms as the causal agents of fungistasis, with their action mediated either by available carbon limitation (nutrient deprivation hypothesis) or production of antifungal compounds (antibiosis hypothesis). To obtain evidence for either of these hypotheses, we measured soil respiration and microbial numbers (as indicators of nutrient stress) and bacterial community composition (as an indicator of potential differences in the composition of antifungal components) during the development of fungistasis. This was done for two fungistatic dune soils in which fungistasis was initially fully or partly relieved by partial sterilization treatment or nutrient addition. Fungistasis development was measured as restriction of the ability of the fungi Chaetomium globosum, Fusarium culmorum, Fusarium oxysporum, and Trichoderma harzianum to colonize soils. Fungistasis did not always reappear after soil treatments despite intense competition for carbon, suggesting that microbial community composition is important in the development of fungistasis. Both microbial community analysis and in vitro antagonism tests indicated that the presence of pseudomonads might be essential for the development of fungistasis. Overall, the results lend support to the antibiosis hypothesis.

scholarly journals Perspective for Aquaponic Systems: “Omic” Technologies for Microbial Community Analysis

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Perla Munguia-Fragozo ◽  
Oscar Alatorre-Jacome ◽  
Enrique Rico-Garcia ◽  
Irineo Torres-Pacheco ◽  
Andres Cruz-Hernandez ◽  
...  
Keyword(s):  
Microbial Community ◽  
Nutrient Dynamics ◽  
Microbial Community Composition ◽  
Chemical Species ◽  
Community Analysis ◽  
Taxonomic Diversity ◽  
Microbial Community Analysis ◽  
Emergent Properties ◽  
Microbial Profile ◽  
Set Up

Aquaponics is the combined production of aquaculture and hydroponics, connected by a water recirculation system. In this productive system, the microbial community is responsible for carrying out the nutrient dynamics between the components. The nutrimental transformations mainly consist in the transformation of chemical species from toxic compounds into available nutrients. In this particular field, the microbial research, the “Omic” technologies will allow a broader scope of studies about a current microbial profile inside aquaponics community, even in those species that currently are unculturable. This approach can also be useful to understand complex interactions of living components in the system. Until now, the analog studies were made to set up the microbial characterization on recirculation aquaculture systems (RAS). However, microbial community composition of aquaponics is still unknown. “Omic” technologies like metagenomic can help to reveal taxonomic diversity. The perspectives are also to begin the first attempts to sketch the functional diversity inside aquaponic systems and its ecological relationships. The knowledge of the emergent properties inside the microbial community, as well as the understanding of the biosynthesis pathways, can derive in future biotechnological applications. Thus, the aim of this review is to show potential applications of current “Omic” tools to characterize the microbial community in aquaponic systems.

Start-up of bio-hydrogen production reactor seeded with sewage sludge and its microbial community analysis

2005 ◽  
Vol 52 (1-2) ◽  
pp. 115-121 ◽  
Author(s):  
M.L. Gong ◽  
N.Q. Ren ◽  
D.F. Xing
Keyword(s):  
Microbial Community ◽  
Sewage Sludge ◽  
Hydrogen Production ◽  
Denaturing Gradient Gel Electrophoresis ◽  
Community Analysis ◽  
Microbial Community Analysis ◽  
Organic Loading Rate ◽  
Start Up ◽  
Gradient Gel Electrophoresis ◽  
Continuously Stirred Tank Reactor

Start-up of a continuously stirred tank reactor for bio-hydrogen production under different initial organic loading rate (OLR) of 3, 7 and 10 kgCOD/m3 d, respectively, was carried out with sewage sludge as inoculum. Molasses wastewater was used as substrate and hydraulic retention time was kept at 6 h. This study aimed to assess OLR on the formation of fermentation types and the structure of microbial communities during the start-up period. It was found that at an initial OLR of 7 kgCOD/m3 d and an initial biomass of 6.24 gVSS/L, an equilibrial microbial community of ethanol-type fermentation could be established within 30 days. The observed average specific hydrogen production rate was 276 mLH2/gVSS d, which was 40% higher than that of the one acclimated with 3 kgCOD/m3 d. Based on denaturing gradient gel electrophoresis profiles, significant microbial population shifts took place at the first 15 days, but a longer period up to 30 days was required to establish a microbial community with stable metabolic activity.

scholarly journals Geochemical and Temporal Influences on the Enrichment of Acidophilic Iron-Oxidizing Bacterial Communities

2016 ◽  
Vol 82 (12) ◽  
pp. 3611-3621 ◽  
Author(s):  
Yizhi Sheng ◽  
Kyle Bibby ◽  
Christen Grettenberger ◽  
Bradley Kaley ◽  
Jennifer L. Macalady ◽  
...  
Keyword(s):  
Community Structure ◽  
Microbial Community ◽  
Microbial Communities ◽  
Temporal Distance ◽  
Fed Batch ◽  
Content Type ◽  
Term Operation ◽  
Geochemical Conditions ◽  
Suspended Growth

ABSTRACTTwo acid mine drainage (AMD) sites in the Appalachian bituminous coal basin were selected to enrich for Fe(II)-oxidizing microbes and measure rates of low-pH Fe(II) oxidation in chemostatic bioreactors. Microbial communities were enriched for 74 to 128 days in fed-batch mode, then switched to flowthrough mode (additional 52 to 138 d) to measure rates of Fe(II) oxidation as a function of pH (2.1 to 4.2) and influent Fe(II) concentration (80 to 2,400 mg/liter). Biofilm samples were collected throughout these operations, and the microbial community structure was analyzed to evaluate impacts of geochemistry and incubation time. Alpha diversity decreased as the pH decreased and as the Fe(II) concentration increased, coincident with conditions that attained the highest rates of Fe(II) oxidation. The distribution of the seven most abundant bacterial genera could be explained by a combination of pH and Fe(II) concentration.Acidithiobacillus,Ferrovum,Gallionella,Leptospirillum,Ferrimicrobium,Acidiphilium, andAcidocellawere all found to be restricted within specific bounds of pH and Fe(II) concentration. Temporal distance, defined as the cumulative number of pore volumes from the start of flowthrough mode, appeared to be as important as geochemical conditions in controlling microbial community structure. Both alpha and beta diversities of microbial communities were significantly correlated to temporal distance in the flowthrough experiments. Even after long-term operation under nearly identical geochemical conditions, microbial communities enriched from the different sites remained distinct. While these microbial communities were enriched from sites that displayed markedly different field rates of Fe(II) oxidation, rates of Fe(II) oxidation measured in laboratory bioreactors were essentially the same. These results suggest that the performance of suspended-growth bioreactors for AMD treatment may not be strongly dependent on the inoculum used for reactor startup.IMPORTANCEThis study showed that different microbial communities enriched from two sites maintained distinct microbial community traits inherited from their respective seed materials. Long-term operation (up to 128 days of fed-batch enrichment followed by up to 138 days of flowthrough experiments) of these two systems did not lead to the same, or even more similar, microbial communities. However, these bioreactors did oxidize Fe(II) and remove total iron [Fe(T)] at very similar rates. These results suggest that the performance of suspended-growth bioreactors for AMD treatment may not be strongly dependent on the inoculum used for reactor startup. This would be advantageous, because system performance should be well constrained and predictable for many different sites.

Sign in / Sign up

Export Citation Format

Share Document