Leggett mode in cuprate superconductors and the electromagnetic properties of Josephson junctions

JETP Letters ◽  
2012 ◽  
Vol 96 (1) ◽  
pp. 35-39 ◽  
Author(s):  
S. V. Kul’bachinskii ◽  
Ya. G. Ponomarev ◽  
L. M. Fisher ◽  
O. V. Belyaeva
Author(s):  
H. Asai

This article examines the THz emission from high-temperature superconducting (HTS) cuprates in the mesoscopic state using the intrinsic Josephson junction model. Cuprate superconductors are high-temperature superconductors that exhibit exotic electromagnetic properties. One of the remarkable features of HTS cuprates is high anisotropy due to their layered structures. Almost all HTS cuprates are composed of stacks of CuO2 layers and blocking layers which supply charge carriers to the CuO2 layers. The crystal structures of the HTS cuprates naturally form Josephson junctions known as intrinsic Josephson junctions (IJJs). This article first describes the basic theory of IJJ and the mechanism of THz emission before discussing the effect of temperature inhomogeneity on the emission properties. It then introduces a novel IJJ-based THz emitter that utilizes laser heating. Theoretical results show that the THz emission is caused by the strong excitation of transverse Josephson plasma waves in IJJs under a direct current bias.


MRS Advances ◽  
2017 ◽  
Vol 2 (48) ◽  
pp. 2587-2596 ◽  
Author(s):  
C.Q. Jin

ABSTRACTNew emergent materials of novel electromagnetic properties are discussed, based primarily on our recent works. The use of pressure effects in terms of self oxidization, inner compression and pure doping in discovering new emergent materials is highlighted. Materials addressed include (I) new correlated oxides such as high-Tc cuprate superconductors; (II) new intermetallic materials such as diluted magnetic semiconductors with independent spin & charge doping; the “111” type iron based superconducting systems; (III) compounds with strong spin orbit coupling, such as itinerant ferromagnetic ruthenates etc.


2000 ◽  
Vol 61 (9) ◽  
pp. 6422-6427 ◽  
Author(s):  
M. A. Navacerrada ◽  
M. L. Lucía ◽  
F. Sánchez-Quesada

Author(s):  
I-Fei Tsu ◽  
D.L. Kaiser ◽  
S.E. Babcock

A current theme in the study of the critical current density behavior of YBa2Cu3O7-δ (YBCO) grain boundaries is that their electromagnetic properties are heterogeneous on various length scales ranging from 10s of microns to ˜ 1 Å. Recently, combined electromagnetic and TEM studies on four flux-grown bicrystals have demonstrated a direct correlation between the length scale of the boundaries’ saw-tooth facet configurations and the apparent length scale of the electrical heterogeneity. In that work, enhanced critical current densities are observed at applied fields where the facet period is commensurate with the spacing of the Abrikosov flux vortices which must be pinned if higher critical current density values are recorded. To understand the microstructural origin of the flux pinning, the grain boundary topography and grain boundary dislocation (GBD) network structure of [001] tilt YBCO bicrystals were studied by TEM and HRTEM.


Author(s):  
S. J. Pennycook ◽  
P. D. Nellist ◽  
N. D. Browning ◽  
P. A. Langjahr ◽  
M. Rühle

The simultaneous use of Z-contrast imaging with parallel detection EELS in the STEM provides a powerful means for determining the atomic structure of grain boundaries. The incoherent Z-contrast image of the high atomic number columns can be directly inverted to their real space arrangement, without the use of preconceived structure models. Positions and intensities may be accurately quantified through a maximum entropy analysis. Light elements that are not visible in the Z-contrast image can be studied through EELS; their coordination polyhedra determined from the spectral fine structure. It even appears feasible to contemplate 3D structure refinement through multiple scattering calculations.The power of this approach is illustrated by the recent study of a series of SrTiC>3 bicrystals, which has provided significant insight into some of the basic issues of grain boundaries in ceramics. Figure 1 shows the structural units deduced from a set of 24°, 36° and 65° symmetric boundaries, and 24° and 45° asymmetric boundaries. It can be seen that apart from unit cells and fragments from the perfect crystal, only three units are needed to construct any arbitrary tilt boundary. For symmetric boundaries, only two units are required, each having the same Burgers, vector of a<100>. Both units are pentagons, on either the Sr or Ti sublattice, and both contain two columns of the other sublattice, imaging in positions too close for the atoms in each column to be coplanar. Each column was therefore assumed to be half full, with the pair forming a single zig-zag column. For asymmetric boundaries, crystal geometry requires two types of dislocations; the additional unit was found to have a Burgers’ vector of a<110>. Such a unit is a larger source of strain, and is especially important to the transport characteristics of cuprate superconductors. These zig-zag columns avoid the problem of like-ion repulsion; they have also been seen in TiO2 and YBa2Cu3O7-x and may be a general feature of ionic materials.


2002 ◽  
Vol 12 (3) ◽  
pp. 133-136 ◽  
Author(s):  
M. Podt ◽  
B. G.A. Rolink ◽  
J. Flokstra ◽  
H. Regalia
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document