Comonomer Effect on the Thermal, Morphological and Mechanical Properties of Poly(ethylene-co-octene)/Poly(ethylene-co-vinyl acetate) Blends

Processing of hybrid composites represents a challenge for engineers where the aim is to establish compatibility among several materials. The aim of this study is to evaluate the effects of different sizes and morphologies of alumina fillers on the mechanical and thermal properties of the composite fibres based on ultra-high molecular weight polyethylene fibres (UHMWPE). These fibres have an outstanding elastic modulus and they are compatible with nonpolar sequences of the poly(ethylene-co-vinyl acetate) (EVA) matrix. Compared to the fibres, inferior mechanical properties of the matrix can be improved using alumina particles. Commercial aluminium oxide (Al2O3) nanoparticles, commercial whiskers and synthesized particles of Al2O3 doped with iron oxide, incorporated in different weight percentages, were used as fillers. The UHMWPE fibres were impregnated using the solution of EVA in toluene with dispersed particles. Fourier transform infrared spectroscopy and field emission scanning electron microscope were used for structural examination. Tensile testing revealed increasing of modulus of elasticity and strengths of obtained hybrid composite fibres. Thermal gravimetry showed improved thermal stability up to 350°C of the hybrid composite fibres with alumina particles doped with iron oxide. Results of tested samples showed that the best mechanical properties were for hybrid composite fibres with 1 wt% of iron doped alumina filler.

Download Full-text

Thermochemical compatibilization of reclaimed tire rubber/ poly(ethylene-co-vinyl acetate) blend using electron beam irradiation and amine-based chemical

Journal of Polymer Research ◽

10.1007/s10965-021-02748-y ◽

2021 ◽

Vol 28 (10) ◽

Author(s):

Suganti Ramarad ◽

Chantara Thevy Ratnam ◽

Yamuna Munusamy ◽

Nor Azura Abdul Rahim ◽

Mathialagan Muniyadi

Keyword(s):

Mechanical Properties ◽

Electron Beam ◽

Vinyl Acetate ◽

Electron Beam Irradiation ◽

Beam Irradiation ◽

Tire Rubber ◽

Waste Tire ◽

Waste Tire Rubber ◽

Poly Ethylene ◽

Compatibilized Blends

AbstractWaste tire rubber is commonly recycled by blending with other polymers. However, the mechanical properties of these blends were poor due to lack of adhesion between the matrix and the waste tire rubber. In this research, the use of electron beam irradiation and (3-Aminopropyl)triethoxy silane (APTES) on enhancing the performance of 50 wt% reclaimed tire rubber (RTR) blend with 50 wt% poly(ethylene-co-vinyl acetate) (EVA) was investigated. Preparation of RTR/EVA blends were carried out in the internal mixer. The blends were then exposed to electron beam (EB) irradiation at doses ranging from 50 to 200 kGy. APTES loading was varied between 1 to 10 wt%. The processing, morphological, mechanical, and calorimetric properties of the blends were investigated. The stabilization torque and total mixing energy was higher in compatibilized blends. Mechanical properties of RTR/EVA blends were improved due to efficiency of APTES in further reclaiming the RTR and compatibilizing the blends. APTES improved the dispersion of embedded smaller RTR particles in EVA matrix and crosslinking efficiency of the blends. Calorimetric studies showed increased crystallinity in compatibilized blends which corresponds to improved mechanical properties. However, the ductility of the blend was decreased due to increased interaction between EVA and APTES. Presence of APTES increased the efficiency of electron beam irradiation induced crosslinking which was shown through gel content analysis and Charlesby-Pinner equation.

Download Full-text