Measurement of the $$\boldsymbol{\Sigma^{0}/\Lambda^{0}}$$ Yield Ratio in $${pA}$$ Interactions at 70 GeV

2021 ◽  
Vol 84 (4) ◽  
pp. 460-466
Author(s):  
A. P. Vorobiev ◽  
A. A. Kiryakov ◽  
V. M. Ronjin ◽  
V. N. Ryadovikov ◽  
Yu. P. Petukhov
Keyword(s):  
2010 ◽  
Vol 139-141 ◽  
pp. 594-599
Author(s):  
Yan Qiu Zhang ◽  
Shu Yong Jiang ◽  
Yu Feng Zheng

The spring steel strip 50CrVA which is cold rolled was applied to manufacture the diaphragm of the automotive horn by means of sheet metal forming. The combination of the experiments with back-propagation artificial neural network (BPANN) is used to solve the springback problem of the diaphragm. Experiments have shown that a 4-8-1 BPANN is able to predict the springback of the diaphragm successfully, and the network is able to model the relationship between the springback of the diaphragm and the process parameters rationally. BPANN simulation results and experimental ones have shown that the springback of the diaphragm is particularly influenced by such parameters as blank thickness, Young’s modulus, punch radius and yield ratio. Furthermore, the springback of the diaphragm decreases with the increase of blank thickness and Young’s modulus, but increases with the increase of punch radius and yield ratio.


2016 ◽  
Vol 22 (2) ◽  
Author(s):  
Abdelkader Bouazza ◽  
Abderrahmane Settaouti

AbstractSputtering is characterized by a sputtering yield ratio which depends on several conditions, in particular the incident ions energy to the cathode, in normal incidence and when considers the angle α of the incident ions. Our investigations may be considered in first step to calculate the sputtering yield of three metals: copper, silver, and aluminum collide with argon, xenon, oxygen and nitrogen ions using highly developed software called SRIM (Stopping and Range of Ions in Matter) with normal incidence, then with varied angles in future works. The results obtained are compared with those obtained using the analytical models based on the Monte Carlo method proposed by researchers as Sigmund and Yamamaura in order to validate models.


2003 ◽  
Vol 66 (5) ◽  
pp. 760-766 ◽  
Author(s):  
KATHLEEN T. RAJKOWSKI ◽  
GLEN BOYD ◽  
DONALD W. THAYER

Like alfalfa sprouts, broccoli sprouts can be a vehicle for bacterial pathogens, which can cause illness when they are consumed. The gamma irradiation process was used to reduce numbers of bacterial pathogens on broccoli sprouts and seeds, and the effect of this process on the seeds was studied. The irradiation destruct values for Salmonella sp. and for strains of Escherichia coli O157:H7 inoculated on broccoli seeds were determined. Results obtained in this study indicate that a dose of 2 kGy reduced total background counts for broccoli sprouts from 106 to 107 CFU/g to 104 to 105 CFU/g and increased the shelf life of the sprouts by 10 days. Yield ratio (wt/wt), germination percentage, sprout length, and thickness were measured to determine the effects of various irradiation doses on the broccoli seeds. Results show a decreased germination percentage at a dose level of 4 kGy, whereas the yield ratio (wt/wt), sprout length, and thickness decreased at the 2-kGy dose level. The radiation doses required to inactivate Salmonella sp. and strains of E. coli O157:H7 were higher than previously reported values. D-values, dose required for a 1-log reduction, for the nonvegetable and vegetable Salmonella sp. isolates were 0.74 and 1.10 kGy, respectively. The values for the nonvegetable and vegetable isolated strains of Escherichia coli O157:H7 were 1.43 and 1.11 kGy, respectively. With the irradiation process, a dose of up to 2 kGy can extend the shelf life of broccoli sprouts. A dose of >2 kGy would have an adverse effect on the broccoli seed and decrease the yield of broccoli sprouts.


2006 ◽  
Vol 77 (7) ◽  
pp. 073502 ◽  
Author(s):  
Zongqing Zhao ◽  
Jiabin Chen ◽  
Yongkun Ding ◽  
Ming Chen ◽  
Yikang Pu

1985 ◽  
Vol 32 (4) ◽  
pp. 1327-1334 ◽  
Author(s):  
P. L. Reeder ◽  
R. A. Warner ◽  
G. P. Ford ◽  
H. Willmes

2015 ◽  
Vol 639 ◽  
pp. 314-319 ◽  
Author(s):  
Weixin Yu ◽  
Yifan Lv ◽  
Shikai Li ◽  
Yang Wang ◽  
Bobo Li ◽  
...  
Keyword(s):  

1959 ◽  
Vol 37 (5) ◽  
pp. 531-536 ◽  
Author(s):  
H. R. Fickel ◽  
R. H. Tomlinson

The effective neutron absorption cross section of Xe135 has been measured with a mass spectrometer by observing the variation in the Cs135/Cs137 fission yield ratio obtained at various thermal neutron fluxes. Values of 3.15 ± 0.06 megabarns and 3.27 ± 0.11 megabarns have been determined for neutron temperatures of 120 °C and 137 °C respectively.


OENO One ◽  
1987 ◽  
Vol 21 (2) ◽  
pp. 81
Author(s):  
M. Nikov

<p style="text-align: justify;">L'étude est menée avec le cépage Merlot conduit en forme haute et à une distance de 3,40 x 1,20 m. Les vignes supportent des charges individuelles de 26, 32, 38 ... jusqu'à 62 bourgeons par cep. La relation entre le nombre d'yeux et le rendement par souche se caractérise par une courbe parabolique avec un maximum autour de 50 bourgeons par cep. L'augmentation de charge au-delà de l'optimum exerce une influence inhibitrice sur la croissance des rameaux individuels depuis la première année. Le rapport entre la surface foliaire et la production représente un facteur essentiel pour la qualité du raisin.</p><p style="text-align: justify;">+++</p><p style="text-align: justify;">The study involves Merlot variety trained with an high trunk and a 3,40 x 1,20 m spacing. The vines support individual pruning levels of 26, 32, 38 ... up to 62 buds/vine. The relationship between bud number and yield per vine is characterized by a parabolic curve with a maximum around 50 buds/vine. The increase in pruning level beyond the optimum induces an inhibitory effect on single shoot growth since the first year. The leaf area : yield ratio represents a primary factor of grape quality.</p>


Sign in / Sign up

Export Citation Format

Share Document