Self-Oxidation of the Condensation Product of Indane-1,3-dione with Quinoline-2-carbaldehyde

2021 ◽  
Vol 57 (11) ◽  
pp. 1887-1889
Author(s):  
M. V. Sigalov ◽  
B. A. Shainyan
Keyword(s):  
Author(s):  
B. J. Grenon ◽  
A. J. Tousimis

Ever since the introduction of glutaraldehyde as a fixative in electron microscopy of biological specimens, the identification of impurities and consequently their effects on biologic ultrastructure have been under investigation. Several reports postulate that the impurities of glutaraldehyde, used as a fixative, are glutaric acid, glutaraldehyde polymer, acrolein and glutaraldoxime.Analysis of commercially available biological or technical grade glutaraldehyde revealed two major impurity components, none of which has been reported. The first compound is a colorless, water-soluble liquid with a boiling point of 42°C at 16 mm. Utilizing Nuclear Magnetic Resonance (NMR) spectroscopic analysis, this compound has been identified to be — dihydro-2-ethoxy 2H-pyran. This impurity component of the glutaraldehyde biological or technical grades has an UV absorption peak at 235nm. The second compound is a white amorphous solid which is insoluble in water and has a melting point of 80-82°C. Initial chemical analysis indicates that this compound is an aldol condensation product(s) of glutaraldehyde.


2020 ◽  
Author(s):  
Viraj kirinda ◽  
Scott Hartley

The self-assembly of foldamers into macrocycles is a simple approach to non-biological higher-order structure. Previous work on the co-assembly of ortho-phenylene foldamers with rod-shaped linkers has shown that folding and self-assembly affect each other; that is, the combination leads to new emergent behavior, such as access to otherwise unfavorable folding states. To this point this relationship has been passive. Here, we demonstrate control of self-assembly by manipulating the foldamers’ conformational energy surfaces. A series of o-phenylene decamers and octamers have been assembled into macrocycles using imine condensation. Product distributions were analyzed by gel-permeation chromatography and molecular geometries extracted from a combination of NMR spectroscopy and computational chemistry. The assembly of o-phenylene decamers functionalized with alkoxy groups or hydrogens gives both [2+2] and [3+3] macrocycles. The mixture results from a subtle balance of entropic and enthalpic effects in these systems: the smaller [2+2] macrocycles are entropically favored but require the oligomer to misfold, whereas a perfectly folded decamer fits well within the larger [3+3] macrocycle that is entropically disfavored. Changing the substituents to fluoro groups, however, shifts assembly quantitatively to the [3+3] macrocycle products, even though the structural changes are well-removed from the functional groups directly participating in bond formation. The electron-withdrawing groups favor folding in these systems by strengthening arene–arene stacking interactions, increasing the enthalpic penalty to misfolding. The architectural changes are substantial even though the chemical perturbation is small: analogous o-phenylene octamers do not fit within macrocycles when perfectly folded, and quantitatively misfold to give small macrocycles regardless of substitution. Taken together, these results represent both a high level of structural control in structurally complex foldamer systems and the demonstration of large-amplitude structural changes as a consequence of a small structural effects.


1947 ◽  
Vol 167 (1) ◽  
pp. 157-167 ◽  
Author(s):  
Jesse W. Huff ◽  
William A. Perlzweig
Keyword(s):  

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
B. M. Praveen ◽  
T. V. Venkatesha

Zn-Fe alloy electrodeposition was carried out in the presence of condensation product 2-{[(1E)-(3,4-dimethoxyphenyl)methylidene]amino}-3-hydroxypropanoic acid formed between veratraldehyde and serine in acid sulphate bath. Hull cell was used for optimizing the operating parameters and bath constituents. During deposition, the potential was shifted towards cathodic direction in the presence of addition agents and brightener. The polarization studies show that deposition taking place in basic bath and optimum bath was 1.08 and 1.15 V, respectively. Current efficiency and throwing power were reached around 85% and 26%, respectively. The SEM images of bright deposit indicated its fine-grained nature and appreciable reduction in the grain size. XRD studies have showed that the grain size of the deposit generated from optimum bath was 16 nm. UV-visible spectroscopic studies confirm the formation of complex between metal ion and brightener.


2017 ◽  
Vol 70 (21) ◽  
pp. 3702-3714 ◽  
Author(s):  
Mima Č. Romanović ◽  
Božidar Čobeljić ◽  
Andrej Pevec ◽  
Iztok Turel ◽  
Sonja Grubišić ◽  
...  

1952 ◽  
Vol 30 (3) ◽  
pp. 203-207 ◽  
Author(s):  
Yvon Perron ◽  
Roger Barré

The synthesis of 1,1,1-trichloro-2,2-bis-(p-cyanophenyl)-ethane was carried out with the condensation product of chloral and toluene as starting material. This product was converted, through the corresponding tetraacetate, to 1,1,1-trichloro-2,2-bis-(p-aldehydophenyl)-ethane which in turn reacted with hydroxylamine to give the dioxime. The subsequent dehydration of the latter gave rise to the desired dinitrile. The corresponding dichloro derivatives of the oxime and nitrile were also prepared.


1966 ◽  
Vol 31 (7) ◽  
pp. 2406-2407 ◽  
Author(s):  
Shoji Fujii ◽  
Hideo Kushida
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document