Electrochemical Reduction of 6-Benzylaminopurine at Mercury Electrodes and Its Analytical Application

2003 ◽  
Vol 68 (6) ◽  
pp. 1076-1093 ◽  
Author(s):  
Danuše Tarkowská ◽  
Milan Kotouček ◽  
Karel Doležal

The commercial exploitation of modern, in vitro plant micropropagation methods, featuring synthetic cytokinins as essential components of the cultivation media, is rapidly increasing. Thus, development of rapid, inexpensive and less labour-intensive methods for monitoring cytokinin levels could help to optimise media consumption and reduce costs. Therefore, we studied the electrochemical behaviour of the highly active and widely used cytokinin, 6-benzylaminopurine (BAP), in aqueous solutions by DC polarography, cyclic and differential pulse voltammetry and constant potential coulometry. The BAP molecule undergoes a six-electron irreversible reduction process that starts with four-electron reduction of the protonated pyrimidine skeleton. As a result of elimination of the amine from the side chain, the N1=C6 electrochemically active bond is re-established and the last two-electron step follows. The intermediates of constant potential electrolysis were identified using mass spectrometric analysis. The dissociation constant (pKa) of BAP was found, spectrophotometrically, to be 4.16. BAP concentrations were measured using two voltammetric techniques, fast-scan differential pulse (FSDPV) and adsorptive stripping voltammetry (AdSV). The relative standard deviations for these two methods were lower than 4.5% (c < 28.7 ng ml-1) and 1.2% (c < 20 ng ml-1), while the detection limits were 7.88 and 0.80 ng ml-1, respectively. Using these techniques, BAP was determined in two types of nutrition media used for the micropropagation of plants in vitro (Gerbera and banana media). In the case of media samples containing the interfering agent adenine (i.e. Gerbera plant medium), the analyte was preconcentrated by ion-exchange chromatography and immunoaffinity chromatography. This preconcentration process gives 92% recovery. In contrast, it was possible to determine BAP levels in simple banana cultivation medium directly, without any pre-purification process. Both methods, reported here (FSDPV and AdSV), were found to be useful for rapidly monitoring BAP consumption by plants during their growth under in vitro conditions.

1974 ◽  
Vol 31 (9) ◽  
pp. 1515-1519 ◽  
Author(s):  
Y. K. Chau ◽  
R. Gächter ◽  
K. Lum-Shue-Chan

A sensitive and accurate method is described for the measurement of the apparent complexing capacity of lake waters. It is based on the measurement of labile copper by differential pulse anodic stripping voltammetry after a number of ionic copper spikes have been allowed to equilibrate with the complexing materials in a water sample. Coefficients of variation for the determination of EDTA at a level of 0.50 μmole/liter in Hamilton Harbor water were 6 and 8%. Analysis of seven replicates of a Hamilton Harbor water sample gave an apparent complexing capacity of 0.52 μmole/liter Cu equivalent with a relative standard deviation of 7.7%. Analyses of a number of samples from Lake Erie and from lakes near Sudbury, Ontario gave a range from nondetectable to 0.70 μmole/liter Cu equivalent of complexing capacity.


2019 ◽  
Vol 25 (4) ◽  
pp. 579-587 ◽  
Author(s):  
Jongte Lalmalsawmi ◽  
Zirlianngura ◽  
Diwakar Tiwari ◽  
Seung-Mok Lee

Novel silane grafted bentonite was obtained using the natural bentonite as precursor material. The material which is termed as nanocomposite was characterized by the Fourier Transform Infra-red (FT-IR) and X-ray diffraction (XRD) methods. The surface imaging and elemental mapping was performed using Scanning Electron Microscopic (SEM/EDX) technique. The electroanalytical studies were performed using the nanocomposite electrode. The electroactive surface area of nanocomposite electrode was significantly increased than the pristine bentonite or bare carbon paste based working electrode. The impedance spectroscopic studies were conducted to simulate the equivalent circuit and Nyquist plots were drawn for the carbon paste electrode and nanocomposite electrodes. A single step oxidation/reduction process occurred for As(III) having ΔE value 0.36 V at pH 2.0. The anodic stripping voltammetry was performed for concentration dependence studies of As(III) (0.5 to 20.0 μg/L) and reasonably a good linear relationship was obtained. The detection limit of the As(III) detection was calculated as 0.00360±0.00002 μg/L having with observed relative standard deviations (RSD) less than 4%. The presence of several cations and anions has not affected the detection of As(III) however, the presence of Cu(II) and Mn(II) affected the detection of As(III). The selectivity of As(III) was achieved using the Tlawng river water sample spiked with As(III).


2012 ◽  
Vol 9 (2) ◽  
pp. 749-755 ◽  
Author(s):  
Riyaz Ahmad Dar ◽  
Krishna Kumar Raj

The electrochemical behaviour of the complex of Cu(II) with 4-chlorobenzylidene-4-aminoacetanilide (CAA) was studied. It was observed that CAA forms 1:1 complex with Cu(II) in between pH 6.5 to 7.1. It was found that the reduction process of Cu(II)- CAA complex is two electron reversible reduction process at D.M.E. The logarithm value of stability constant of Cu(II)-4-Chlorobenzylidene-4-aminoacetanilide (CAA) complex has been found to be 4.85.The redox properties of the complex was extensively investigated by electrochemical method using cyclic voltammetry (CV).The Cu(II) complexes exhibited quasi-reversible single electron transfer process.The Schiff base and its complex has been screened for theirin-vitroantibacterial (Escherichiacoli,Staphylococcus aureus,Vibrio choleraeandBacillus subtilis) and antifungal (Aspergillus nigerandPenicillium liliacinum) activities by minimum inhibitory concentration (MIC) method.


1982 ◽  
Vol 65 (4) ◽  
pp. 987-991 ◽  
Author(s):  
R Duane Satzger ◽  
Charles S Clow ◽  
Evelyn Bonnin ◽  
Fred L Fricke

Abstract A method is described for the simultaneous determination of ultratrace levels of lead and cadmium in selected agricultural crop samples by differential pulse anodic stripping voltammetry. Samples are dry ashed at high temperature with H2SO4 as an ashing aid. Techniques are described to control the lead and cadmium blank levels of 2 ng and 0.4 ng, respectively. Typical relative standard deviations for the crop analyses are 13% at 100 ng/g and 25% at 10 ng/g for lead, and 5% at 100 ng/g and 10% at 10 ng/g for cadmium. The lowest quantifiable level, based on 3 g dry sample, is 2 ng/g for lead and 1 ng/g for cadmium. Recovery studies, precision studies, and analyses of NBS Standard Reference Materials demonstrate the accuracy and reproducibility of this technique. A summary of results for over 1700 crop samples is reported.


1976 ◽  
Vol 59 (3) ◽  
pp. 650-654 ◽  
Author(s):  
Walter Holak

Abstract Arsenic and selenium are determined in foods by differential pulse polarography and cathodic stripping voltammetry. The sample is digested with nitric acid and magnesium nitrate and then dissolved in dilute hydrochloric acid. An aliquot is removed, the arsenic is chemically reduced to the trivalent state, and interferences are removed by ion exchange before polarography. Selenium is determined in a second aliquot by cathodic stripping voltammetry. Recoveries for both elements in several foods were from 90 to 110%. The relative standard deviations for arsenic at 5 ppm and selenium at 0.48 ppm were 5.8 and 7.3%, respectively.


2019 ◽  
Vol 2019 ◽  
pp. 1-7 ◽  
Author(s):  
Thi Thu Phuong Nguyen ◽  
Xuan Gian Trinh ◽  
Dao Thi To Uyen

We have successfully manufactured a new electrode modified with bismuth oxide (Bi2O3) using carbon nanotubes (CNTs). The electrode was fabricated to detect cadmium (Cd), lead (Pb), and indium (In) by differential pulse anodic stripping voltammetry (DP-ASV). The electrode surface was studied by scanning electron microscopy (SEM), and the reduction and oxidation processes were studied by cyclic voltammetry (CV) techniques. Operational parameters such as electrode size, bismuth concentration, and electrolytic background were optimized. The DP-ASV method used fabricated electrodes with a linear response range from 1.5–20 μg·L−1 with Cd(II) and Pb(II) and 2.5–20 μg·L−1 with In(III); low detection limit (LOD) of 0.22 μg·L−1 with Cd(II), 0.65 μg·L−1 with In(III), and 0.26 μg·L−1 with Pb(II); and good repeatability with relative standard deviations (RSD) of 2.65%, 2.51%, and 3.34% with Cd(II), Pb(II), and In(III), respectively (n = 8). The electrode can be used to test the content of Cd(II), In(III), and Pb(II) in water.


2012 ◽  
Vol 10 (4) ◽  
pp. 1280-1289 ◽  
Author(s):  
Elina Skeva ◽  
Stella Girousi

AbstractElectrochemical DNA biosensors are promising tools for the fast, inexpensive and simple in vitro analysis for the determination of free radicals and antioxidants. High concentrations of antioxidants in such compounds as phenolic acids and plant extracts, act as free radical terminators which reduce the effect of the oxidative dam-age on DNA. The electrochemical behavior of three representative phenolic acids, caffeic acid, gallic acid and trolox were studied by cyclic voltammetry. Moreover, the determination of the above antioxidants under the optimized conditions (scan rate, deposition potential and time) using differential pulse voltammetry was also investigated. In vitro studies focused on their antioxidative effect were performed by adsorptive transfer stripping voltammetry and dsDNA biosensor. Using Fenton’s system, with FeSO4 and H2O2 was chosen as a strong oxidative system. This biosensor was applied as a screening antioxidant test in order to estimate the antioxidant capacity of aqueous herb extracts.


2010 ◽  
Vol 6 (1) ◽  
pp. 855-860
Author(s):  
Tarik Attar ◽  
Nouria Dennouni Medjati ◽  
Yahia Harek ◽  
Lahcene Larabi

An electroanalytical method has been developed for the determination of zinc in whole blood by differential pulse anodic stripping voltammetry (DPASV) on a hanging mercury drop electrode (HMDE). The best conditions were found to be electrolyte support perchloric acid 0.02M, an accumulation potential of -1150 mV, and an accumulation time of 60 s. The optimum value of stirring rate was determined to be 400 rpm. The correlation coefficient and relative standard deviation were 0.9999 and 3.96% respectively with a detection limit of 0.86 µg L-1. Zinc levels in whole blood samples of 53 healthy subjects living in Tlemcen (west Algeria).


2002 ◽  
Vol 85 (1) ◽  
pp. 233-242 ◽  
Author(s):  
Clinio Locatelli

Abstract Peak area instead of peak height is used for the simultaneous determination of Cu(II), Pb(II), Cd(II), and Zn(II) in fresh and sea water in the presence of anionic and cationic surfactants by differential pulse anodic stripping voltammetry. These species, if present, tend to make more irreversible the electrodic process of the metals. Because the employment of peak area for species having irreversible electrodic processes permits limits of detection about one or 2 orders of magnitude lower, this work shows the possibility of determining heavy metals at ultratrace level concentrations in the presence of surfactants, compounds which are always present in natural waters. The precision and accuracy of the analytical method were checked by the analysis of the standard reference materials (SRM) Fresh Water NIST-SRM 1643d, Sea Water BCR-CRM 403, and Estuarine Water BCR-CRM 505. The former, expressed as relative standard deviation (sr), and the latter, expressed as relative error (e), were satisfactory, being in all cases lower than 5%. The analytical procedure has been applied to fresh and sea water sampled in the Po river mouth area (Italy).


2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Nguyen Mau Thanh ◽  
Nguyen Van Hop ◽  
Nguyen Dinh Luyen ◽  
Nguyen Hai Phong ◽  
Tran Thanh Tam Toan

The simultaneous electrochemical determination of Zn(II), Cd(II), Pb(II), and Cu(II) in the aqueous solution has been developed on the basis of the bismuth film glassy carbon electrode (GCE) using differential pulse anodic stripping voltammetry (DP-ASV). The bismuth film electrode (BiFE) was prepared by adding 500 ppb bismuth(III) directly to the sample solution and simultaneously depositing bismuth and the metal analytes on GCE. The optimal operational parameters, namely, accumulation potential (–1.6 V), accumulation time (110 s), pulsed amplitude (0.07 V), and scan rate (0.021 V·s−1), were found using a Box–Behnken design. Under the optimum conditions, a linear relationship exists between the current and the concentration of Zn(II), Cd(II), Pb(II), and Cu(II) in the range between 5.0 ppb and 110.0 ppb with the detection limits of 1.07 for Zn(II), 0.93 ppb for Cd(II), 0.65 ppb for Pb(II), and 0.94 ppb for Cu(II) calculated on the basis of a signal-to-noise ratio equal to 3 (S/N = 3). The interference experiments show that Co(II), Ni(II), and Fe(III) have a little influence on the DP-ASV signals of Zn(II), Cd(II), Pb(II), and Cu(II). In addition, a high reproducibility was indicated from small relative standard deviations (1.03%, 1.74%, 1.32%, and 4.74%) for 25 repeated measurements of 15 ppb copper, lead, cadmium, and zinc solutions. BiFE was successfully applied to determine Zn(II), Cd(II), Pb(II), and Cu(II) in river samples, and the results are in a good agreement with those determined with graphite furnace atomic absorption spectrometry (GF-AAS).


Sign in / Sign up

Export Citation Format

Share Document