Syndepositional architecture of the northern Athabasca Oil Sands Deposit, northeastern Alberta

2015 ◽  
Vol 52 (1) ◽  
pp. 21-50 ◽  
Author(s):  
Paul L. Broughton

Salt dissolution collapse-subsidence is proposed as the dominant tectono-stratigraphic control on the deposition of major sand trends across the northern Athabasca Oil Sands Deposit. Salt removal along linear dissolution trends 200 m below in the Prairie Evaporite (Middle Devonian) halite beds resulted in the collapse of the overlying Upper Devonian strata. The collapse-induced differential subsidence of the fault blocks formed the floor underlying the McMurray deposits in the 50 km long V-shaped Bitumount Trough extending across the northern area of the Athabasca Oil Sands Deposit. The lower and middle-upper McMurray sand trends filled the accommodation created by collapses of a linear chain of Upper Devonian fault blocks along the northern margin of the western Trough. A pair of tens-of-metres thick and 20–30 km long sand trends developed parallel in overlying accumulations of the lower and middle-upper McMurray Formation (Aptian). This half-graben tilted northward as the dissolution trend in the underlying Prairie Evaporite salt scarp widened, and the scarp margin was deeply embayed. Salt dissolution-induced structures were the principal control that located the large sand complexes exploited by bitumen mining projects. Earlier models of McMurray architecture interpreted the underlying karst collapse to have been largely pre-Cretaceous. This new architectural model reinterprets the spatio-temporal balance between erosion at the pre-Cretaceous surface and within the buried salt beds. Extensive salt removal resulted in collapse of the underlying hypogene karst during the late Aptian age. This resulted in the over-thickened multi-kilometres long McMurray sand trends. The underlying karst collapse resulted in unstable deposition surfaces along the sub-Cretaceous trough floors. This tectono-stratigraphic architecture, called the syndepositional model in this study, is proposed as an alternative to two other models, one of which proposes that deeply incised channel valleys and fills resulted from multiple significant sea-level fluctuations, while the other proposes that stacked parasequences accumulated along overlying shallow channels that meandered across a stable fluvio-estuarine coast.

2021 ◽  
Vol 50 (1) ◽  
Author(s):  
Paul Broughton

Meteoric and glacial meltwater charged groundwater, mixed with dissolved salts from Devonian sources at depth, discharged as saline springs along topographic lows of the Athabasca River Valley, which downcuts into the Cretaceous Athabasca oil sands deposit in northeast Alberta, western Canada. These Quaternary saline seeps have TDS measurements, isotope signatures and other chemical characteristics indicative of the groundwater flows coming in contact with Prairie Evaporite (M. Devonian) salt beds, 200 m below the surface. Migrations up-section of groundwater with dissolved chloride and sulphate salts occurred along salt dissolution collapse breccia zones that cross-cut Upper Devonian limestone strata. Seeps discharged along the karstic Devonian limestone paleotopography, the unconformity surface flooring the Lower Cretaceous McMurray Formation. Saline to brine springs along the Athabasca River Valley have TDS measurements that can exceed 100,000 mg/L. Quaternary salt removal was insignificant compared to the voluminous removal of the 80-130 m thick salt section for 1000s km2 during the Early Cretaceous configuration of the Devonian paleotopography, which partially controlled depositional patterns of the overlying McMurray Formation, principal host rock of the Athabasca oil sands. Little is known of the storage or disposition of voluminous brines that would have resulted from this regional-scale removal of the salt beds below the Athabasca deposit during the Cordilleran configuration of the foreland Alberta Basin. Holocene dissolution trends and discharges at the surface as saline springs are proposed as a modern analogue for voluminous Early Cretaceous brine seeps to the surface along salt dissolution collapse breccia zones, concurrent with deposition of the McMurray Formation. This model links several characteristics of the McMurray Formation as responses to Aptian brine seeps to the surface. These include: (1) the emplacement of a drainage-line silcrete along the margins of the Assiniboia PaleoValley, now partially exhumed by the Athabasca River Valley, (2) distribution of brackish-water burrowing organisms, and (3) diagenesis of calcite-cemented sand intervals.


2016 ◽  
Vol 53 (9) ◽  
pp. 896-930 ◽  
Author(s):  
Paul L. Broughton

The northern Athabasca Oil Sands Deposit accumulated on sub-Cretaceous structure partially configured by multistage pre-Cretaceous salt dissolutions in Prairie Evaporite (Middle Devonian) substrate that continued concurrent with deposition of McMurray Formation (Aptian) strata. Dissolution fronts only 250 m below advanced along NW- and NE-oriented fracture–fault lineaments that coalesced into larger salt removal areas. This structural grain was transmitted to the overlying dissected Upper Devonian karst topography draped by lower McMurray braided rivers along a lattice-like channel network. The dominant NW structural grain continued during middle McMurray deposition, with fluvial-estuarine point bars aligned along subparallel tidal channels. Regional salt removal fronts concurrent with middle McMurray deposition migrated north of the Bitumount Trough, resulting in the 200 km2 central collapse. The northern Athabasca Deposit area was configured as a funnel-shaped lower estuary structure consisting of aligned Upper Devonian – lower McMurray fault block terraces that stepped down northward into the central collapse. Sinuous river channels of the upper estuary, constrained along stable substrate of the main paleovalley, flowed northward onto the unstable floor of this funnel-form lower estuary. The main paleovalley fairway branched into multiple tens of kilometres long subparallel fluvio-estuarine tidal channels aligned parallel to the NW structural grain. Sand transport fairways cascaded over the step-down terraces and permitted aggradations of overlying fluvio-tidal point bars to accumulate into giant commercially attractive sand complexes. The internal architecture of these tens of metres thick sand deposits included deposit-wide erosion surfaces resulting from cycles of collapse–subsidence, stabilized substrate and erosion, and renewed subsidence and aggradation.


Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 102
Author(s):  
Paraskevi Nomikou ◽  
Dimitris Evangelidis ◽  
Dimitrios Papanikolaou ◽  
Danai Lampridou ◽  
Dimitris Litsas ◽  
...  

On 30 October 2020, a strong earthquake of magnitude 7.0 occurred north of Samos Island at the Eastern Aegean Sea, whose earthquake mechanism corresponds to an E-W normal fault dipping to the north. During the aftershock period in December 2020, a hydrographic survey off the northern coastal margin of Samos Island was conducted onboard R/V NAFTILOS. The result was a detailed bathymetric map with 15 m grid interval and 50 m isobaths and a morphological slope map. The morphotectonic analysis showed the E-W fault zone running along the coastal zone with 30–50° of slope, forming a half-graben structure. Numerous landslides and canyons trending N-S, transversal to the main direction of the Samos coastline, are observed between 600 and 100 m water depth. The ENE-WSW oriented western Samos coastline forms the SE margin of the neighboring deeper Ikaria Basin. A hummocky relief was detected at the eastern margin of Samos Basin probably representing volcanic rocks. The active tectonics characterized by N-S extension is very different from the Neogene tectonics of Samos Island characterized by NE-SW compression. The mainshock and most of the aftershocks of the October 2020 seismic activity occur on the prolongation of the north dipping E-W fault zone at about 12 km depth.


2021 ◽  
pp. 117014
Author(s):  
Narumol Jariyasopit ◽  
Tom Harner ◽  
Cecilia Shin ◽  
Richard Park

Sign in / Sign up

Export Citation Format

Share Document