LITHOPROBE seismic reflection imaging of Rocky Mountain structures east of Canal Flats, British Columbia

1988 ◽  
Vol 25 (9) ◽  
pp. 1339-1348 ◽  
Author(s):  
David W. S. Eaton ◽  
Frederick A. Cook
Keyword(s):  
British Columbia ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Rocky Mountain ◽  
Normal Fault ◽  
Seismic Reflection Data ◽  
Middle Cambrian ◽  
Reflection Data ◽  
Processing Techniques ◽  
Surface Geology

LITHROPROBE seismic reflection data, coupled with information from industry seismic data and surface geology, image the thin-skinned structures of the western Rocky Mountains from the Main Ranges to the Rocky Mountain Trench near Canal Flats, British Columbia. Reprocessing of the LITHOPROBE seismic reflection line was conducted to improve resolution of upper-crustal features. Careful application of "conventional" processing techniques significantly improved the coherence of reflections from the first 6 s. A spatial semblance filter was applied to further enhance coherent signal, and residual-statics corrections were applied by cross correlation of unstacked data with semblance-filtered pilot traces.A near-basement reflection zone arising from Middle Cambrian strata is visible on an industry reflection profile at an approximate depth of 8 km beneath the Main Ranges. A similar reflection zone is imaged on the LITHOPROBE data at a depth of 11 km bsl but is interpreted as arising from Proterozoic strata. The autochthonous crystalline basement is interpreted as being below these layers and dipping about 2 °to the west. Geometric evidence is visible for several major thrust ramps involving the basal décollement and for an intermediate-level décollement that loses displacement into folds within the Porcupine Creek Anticlinorium. Reflections related to the Gypsum fault, the Redwall thrust, and the Lussier River normal fault are also imaged.

scholarly journals Improved Interpretation of Deep Seismic Reflection Data in Areas of Complex Geology Through Integration With Passive Seismic Data Sets

2018 ◽  
Vol 123 (12) ◽  
pp. 10,810-10,830
Author(s):  
Michael Dentith ◽  
Huaiyu Yuan ◽  
Ruth Elaine Murdie ◽  
Perla Pina-Varas ◽  
Simon P. Johnson ◽  
...  
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Data Sets ◽  
Seismic Reflection Data ◽  
Deep Seismic Reflection ◽  
Reflection Data ◽  
Passive Seismic ◽  
Complex Geology

Late Cretaceous – Cenozoic history of the transition zone between the East European Craton and the Paleozoic Platform, Polish sector of the Baltic Sea, revealed by new offshore regional seismic reflection data (BALTEC project)

2021 ◽  
Author(s):  
Piotr Krzywiec ◽  
Łukasz Słonka ◽  
Quang Nguyen ◽  
Michał Malinowski ◽  
Mateusz Kufrasa ◽  
...  
Keyword(s):  
High Resolution ◽  
Late Cretaceous ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Upper Cretaceous ◽  
Seismic Reflection Data ◽  
East European ◽  
Reflection Data ◽  
Multichannel Seismic Reflection ◽  
Multichannel Seismic Reflection Data

<p>In 2016, approximately 850 km of high-resolution multichannel seismic reflection data of the BALTEC survey have been acquired offshore Poland within the transition zone between the East European Craton and the Paleozoic Platform. Data processing, focused on removal of multiples, strongly overprinting geological information at shallower intervals, included SRME, TAU-P domain deconvolution, high resolution parabolic Radon demultiple and SWDM (Shallow Water De-Multiple). Entire dataset was Kirchhoff pre-stack time migrated. Additionally, legacy shallow high-resolution multichannel seismic reflection data acquired in this zone in 1997 was also used. All this data provided new information on various aspects of the Phanerozoic evolution of this area, including Late Cretaceous to Cenozoic tectonics and sedimentation. This phase of geological evolution could be until now hardly resolved by analysis of industry seismic data as, due to limited shallow seismic imaging and very strong overprint of multiples, essentially no information could have been retrieved from this data for first 200-300 m. Western part of the BALTEC dataset is located above the offshore segment of the Mid-Polish Swell (MPS) – large anticlinorium formed due to inversion of the axial part of the Polish Basin. BALTEC seismic data proved that Late Cretaceous inversion of the Koszalin – Chojnice fault zone located along the NE border of the MPS was thick-skinned in nature and was associated with substantial syn-inversion sedimentation. Subtle thickness variations and progressive unconformities imaged by BALTEC seismic data within the Upper Cretaceous succession in vicinity of the Kamień-Adler and the Trzebiatów fault zones located within the MPS documented complex interplay of Late Cretaceous basin inversion, erosion and re-deposition. Precambrian basement of the Eastern, cratonic part of the study area is overlain by Cambro-Silurian sedimentary cover. It is dissected by a system of steep, mostly reverse faults rooted in most cases in the deep basement. This fault system has been regarded so far as having been formed mostly in Paleozoic times, due to the Caledonian orogeny. As a consequence, Upper Cretaceous succession, locally present in this area, has been vaguely defined as a post-tectonic cover, locally onlapping uplifted Paleozoic blocks. New seismic data, because of its reliable imaging of the shallowest substratum, confirmed that at least some of these deeply-rooted faults were active as a reverse faults in latest Cretaceous – earliest Paleogene. Consequently, it can be unequivocally proved that large offshore blocks of Silurian and older rocks presently located directly beneath the Cenozoic veneer must have been at least partly covered by the Upper Cretaceous succession; then, they were uplifted during the widespread inversion that affected most of Europe. Ensuing regional erosion might have at least partly provided sediments that formed Upper Cretaceous progradational wedges recently imaged within the onshore Baltic Basin by high-end PolandSPAN regional seismic data. New seismic data imaged also Paleogene and younger post-inversion cover. All these results prove that Late Cretaceous tectonics substantially affected large areas located much farther towards the East than previously assumed.</p><p>This study was funded by the Polish National Science Centre (NCN) grant no UMO-2017/27/B/ST10/02316.</p>

Normal fault growth and segment linkage in a gravitationally detached delta system: evidence from 3D seismic reflection data from the Ceduna Sub-basin, Great Australian Bight

2015 ◽  
Vol 55 (2) ◽  
pp. 467
Author(s):  
Alexander Robson ◽  
Rosalind King ◽  
Simon Holford
Keyword(s):  
Seismic Reflection ◽  
Fault Plane ◽  
Structural Evolution ◽  
Normal Fault ◽  
Fault System ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Listric Fault ◽  
Dip Angle ◽  
Fault Growth

The authors used three-dimensional (3D) seismic reflection data from the central Ceduna Sub-Basin, Australia, to establish the structural evolution of a linked normal fault assemblage at the extensional top of a gravitationally driven delta system. The fault assemblage presented is decoupled at the base of a marine mud from the late Albian age. Strike-linkage has created a northwest–southeast oriented assemblage of normal fault segments and dip-linkage through Santonian strata, which connects a post-Santonian normal fault system to a Cenomanian-Santonian listric fault system. Cenomanian-Santonian fault growth is on the kilometre scale and builds an underlying structural grain, defining the geometry of the post-Santonian fault system. A fault plane dip-angle model has been created and established through simplistic depth conversion. This converts throw into fault plane dip-slip displacement, incorporating increasing heave of a listric fault and decreasing in dip-angle with depth. The analysis constrains fault growth into six evolutionary stages: early Cenomanian nucleation and radial growth of isolated fault segments; linkage of fault segments by the latest Cenomanian; latest Santonian Cessation of fault growth; erosion and heavy incision during the continental break-up of Australia and Antarctica (c. 83 Ma); vertically independent nucleation of the post-Santonian fault segments with rapid length establishment before significant displacement accumulation; and, continued displacement into the Cenozoic. The structural evolution of this fault system is compatible with the isolated fault model and segmented coherent fault model, indicating that these fault growth models do not need to be mutually exclusive to the growth of normal fault assemblages.

scholarly journals Monte Carlo reservoir analysis combining seismic reflection data and informed priors

Geophysics ◽  
2015 ◽  
Vol 80 (1) ◽  
pp. R31-R41 ◽  
Author(s):  
Andrea Zunino ◽  
Klaus Mosegaard ◽  
Katrine Lange ◽  
Yulia Melnikova ◽  
Thomas Mejer Hansen
Keyword(s):  
Monte Carlo ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Probabilistic Approach ◽  
Multiple Point ◽  
Petroleum Reservoir ◽  
Inversion Algorithm ◽  
Reservoir Properties ◽  
Seismic Reflection Data ◽  
Reflection Data

Determination of a petroleum reservoir structure and rock bulk properties relies extensively on inference from reflection seismology. However, classic deterministic methods to invert seismic data for reservoir properties suffer from some limitations, among which are the difficulty of handling complex, possibly nonlinear forward models, and the lack of robust uncertainty estimations. To overcome these limitations, we studied a methodology to invert seismic reflection data in the framework of the probabilistic approach to inverse problems, using a Markov chain Monte Carlo (McMC) algorithm with the goal to directly infer the rock facies and porosity of a target reservoir zone. We thus combined a rock-physics model with seismic data in a single inversion algorithm. For large data sets, the McMC method may become computationally impractical, so we relied on multiple-point-based a priori information to quantify geologically plausible models. We tested this methodology on a synthetic reservoir model. The solution of the inverse problem was then represented by a collection of facies and porosity reservoir models, which were samples of the posterior distribution. The final product included probability maps of the reservoir properties in obtained by performing statistical analysis on the collection of solutions.

Basement-involved inversion at the Appalachian structural front, western Newfoundland: an interpretation of seismic reflection data with implications for petroleum prospectivity

2004 ◽  
Vol 52 (3) ◽  
pp. 215-233 ◽  
Author(s):  
Glen S. Stockmal ◽  
Art Slingsby ◽  
John W.F. Waldron
Keyword(s):  
Seismic Reflection ◽  
Hanging Wall ◽  
Normal Fault ◽  
Hydrocarbon Exploration ◽  
Normal Faults ◽  
Apparent Magnitude ◽  
Seismic Reflection Data ◽  
The Public ◽  
Reflection Data ◽  
New Interpretation

Abstract Recent hydrocarbon exploration in western Newfoundland has resulted in six new wells in the Port au Port Peninsula area. Port au Port No.1, drilled in 1994/95, penetrated the Cambro-Ordovician platform and underlying Grenville basement in the hanging wall of the southeast-dipping Round Head Thrust, terminated in the platform succession in the footwall of this basement-involved inversion structure, and discovered the Garden Hill petroleum pool. The most recent well, Shoal Point K-39, was drilled in 1999 to test a model in which the Round Head Thrust loses reverse displacement to the northeast, eventually becoming a normal fault. This model hinged on an interpretation of a seismic reflection survey acquired in 1996 in Port au Port Bay. This survey is now in the public domain. In our interpretation of these data, the Round Head Thrust is associated with another basement-involved feature, the northwest-dipping Piccadilly Bay Fault, which is mapped on Port au Port Peninsula. Active as normal faults in the Taconian foreland, both these faults were later inverted during Acadian orogenesis. The present reverse offset on the Piccadilly Bay Fault was previously interpreted as normal offset on the southeast-dipping Round Head Thrust. Our new interpretation is consistent with mapping on Port au Port Peninsula and north of Stephenville, where all basement-involved faults are inverted and display reverse senses of motion. It also explains spatially restricted, enigmatic reflections adjacent to the faults as carbonate conglomerates of the Cape Cormorant Formation or Daniel’s Harbour Member, units associated with inverted thick-skinned faults. The K-39 well, which targeted the footwall of the Round Head Thrust, actually penetrated the hanging wall of the Piccadilly Bay Fault. This distinction is important because the reservoir model invoked for this play involved preferential karstification and subsequent dolomitization in the footwalls of inverted thick-skinned faults. The apparent magnitude of structural inversion across the Piccadilly Bay Fault suggests other possible structural plays to the northeast of K-39.

Instantaneous spectral bandwidth and dominant frequency with applications to seismic reflection data

Geophysics ◽  
1993 ◽  
Vol 58 (3) ◽  
pp. 419-428 ◽  
Author(s):  
Arthur E. Barnes
Keyword(s):  
Instantaneous Frequency ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Power Spectra ◽  
Dominant Frequency ◽  
Center Frequency ◽  
Spectral Bandwidth ◽  
Instantaneous Amplitude ◽  
Seismic Reflection Data ◽  
Reflection Data

Fourier power spectra are often usefully characterized by average measures. In reflection seismology, the important average measures are center frequency, spectral bandwidth, and dominant frequency. These quantities have definitions familiar from probability theory: center frequency is the spectral mean, spectral bandwidth is the standard deviation about that mean, and dominant frequency is the square root of the second moment, which serves as an estimate of the zero‐crossing frequency. These measures suggest counterparts defined with instantaneous power spectra in place of Fourier power spectra, so that they are instantaneous in time though they represent averages in frequency. Intuitively reasonable requirements yield specific forms for these instantaneous quantities that can be computed with familiar complex seismic trace attributes. Instantaneous center frequency is just instantaneous frequency. Instantaneous bandwidth is the absolute value of the derivative of the instantaneous amplitude divided by the instantaneous amplitude. Instantaneous dominant frequency is the square root of the sum of the squares of the instantaneous frequency and instantaneous bandwidth. Instantaneous bandwidth and dominant frequency find employment as additional complex seismic trace attributes in the detailed study of seismic data. Instantaneous bandwidth is observed to be nearly always less than instantaneous frequency; the points where it is larger may mark the onset of distinct wavelets. These attributes, together with instantaneous frequency, are perhaps, of greater use in revealing the time‐varying spectral properties of seismic data. They can help in the search for low frequency shadows or in the analysis of frequency change due to effects of data processing. Instantaneous bandwidth and dominant frequency complement instantaneous frequency and should find wide application in the analysis of seismic reflection data.

scholarly journals Structural Interpretation of Yamama and Naokelekan Formations in Tuba Oil Field Using 2D Seismic Data

2021 ◽  
Vol 54 (2B) ◽  
pp. 55-64
Author(s):  
Belal M. Odeh
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Synthetic Seismogram ◽  
Oil Field ◽  
Well Log ◽  
Seismic Reflection Data ◽  
Depth Maps ◽  
Reflection Data ◽  
Interpretation Process ◽  
Southern Iraq

This research includes structure interpretation of the Yamama Formation (Lower Cretaceous) and the Naokelekan Formation (Jurassic) using 2D seismic reflection data of the Tuba oil field region, Basrah, southern Iraq. The two reflectors (Yamama and Naokelekan) were defined and picked as peak and tough depending on the 2D seismic reflection interpretation process, based on the synthetic seismogram and well log data. In order to obtain structural settings, these horizons were followed over all the regions. Two-way travel-time maps, depth maps, and velocity maps have been produced for top Yamama and top Naokelekan formations. The study concluded that certain longitudinal enclosures reflect anticlines in the east and west of the study area representing Zubair and Rumaila fold confined between them a fold consist of two domes represents Tuba fold with the same trending of Zubair and Rumaila structures. The study confirmed the importance of this field as a reservoir of the accumulation of hydrocarbons.

scholarly journals Reassessing legacy seismic reflection data. Extracting new information through advanced seismic processing schemes.

2021 ◽  
Author(s):  
Ramon Carbonell ◽  
Yesenia Martinez ◽  
Irene de Felipe ◽  
Juan Alcalde ◽  
Imma Palomeras ◽  
...  
Keyword(s):  
Land Use Planning ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Leading Edge ◽  
Critical Issue ◽  
Commercial Development ◽  
Natural Risk ◽  
Seismic Reflection Data ◽  
Seismic Processing ◽  
Reflection Data

<p><span>Hardware and software innovations taking place since the commercial development of seismic reflection imaging in the 60’s and early 70’s have resulted in various improved powerful seismic imaging solutions. Overall, these have been very successful in contrasting geological environments pursuing a wide variety of different targets. The innovative advances in seismic processing may constitute critical tools when analyzing seismic data acquired in highly heterogeneous geologic environments as they can efficiently increase the resolution power. In addition, they can become relevant when using modern acquisition instrumentation and strategies. Furthermore, these new developments significantly increase the value of legacy seismic reflection data. Currently, reassessing controlled source seismic data is becoming a critical issue mostly due to the increasing difficulties for acquiring new profiles posed by environmental regulations and high prices. However, the knowledge of the subsurface is an asset for our society, for example: </span><span><span>land-use planning and management; natural risk assessments; or exploration and exploitation for geo-resources. Here we present examples of analysis schemes such as seismic attribute analysis and Common Reflection Surface stacking applied on a number of old seismic reflection profiles (Deep lithospheric transects as well as high resolution profiles) in an effort to bring up their validity. Results indicate how these leading edge methods contribute to significantly improve the quality of vintage seismic data, significantly reducing reflector uncertainties and easing their interpretation. </span></span></p><p><span><span>This research is supported by: Generalitat de Catalunya (AGAUR) grant 2017SGR1022 (GREG); EU (H2020) 871121 (EPOS-SP); EIT-RaewMaterias 17024 (SIT4ME). </span></span></p><p> </p>

Sign in / Sign up

Export Citation Format

Share Document