Antiferromagnetic Resonance in Mn2P2O7

1972 ◽  
Vol 50 (21) ◽  
pp. 2681-2687 ◽  
Author(s):  
D. C. Fowlis ◽  
C. V. Stager
Keyword(s):  
Single Crystal ◽  
Antiferromagnetic Resonance ◽  
Extended Theory ◽  
Temperature Range ◽  
Made In

Antiferromagnetic resonance has been observed in single crystal samples of Mn2P2O7. Measurements were made in narrow frequency ranges at 35 and 70 GHz over a temperature range from 1.2 to 14 °K. The results could not be fitted to the Nagamiya–Yosida theory. The results are compared with an extended theory due to Date.

Thermal conduction in normal and superconducting tin and indium

1961 ◽  
Vol 262 (1310) ◽  
pp. 420-434 ◽  
Keyword(s):  
Thermal Conductivity ◽  
Single Crystal ◽  
Normal State ◽  
Thermal Conduction ◽  
Impurity Scattering ◽  
Simple Expression ◽  
Temperature Range ◽  
Lattice Resistance ◽  
Theory Of Superconductivity ◽  
Made In

A study of the thermal conductivity of single crystal specimens of pure tin and indium has been made in the temperature range 2 to 4·2 C K in both the normal and superconducting states. Values of the normal state thermal conductivity, corrected for magnetoresistance, fitted well the expression 1/ K = α T 2 + β/ T , although deviations from this formula were observed in the purest specimens. Serious departures from Matthiessen’s rule occurred, however, in that the magnitude of the lattice resistance (α T 2 ) depended strongly on purity. Systematic variations in the ratio of conductivities K g K n with purity were found to follow the simple expression suggested by Hulm. The limiting curves for K sIKn (in the cases of all impurity scattering, and of all lattice scattering of electrons) are compared with recent calculations on the Bardeen-Cooper-Schrieffer theory of superconductivity.

Thermal conductivity of the single-crystal monoisotopic 29Si in the temperature range 2.4–410 K

2013 ◽  
Vol 55 (1) ◽  
pp. 235-239 ◽  
Author(s):  
A. V. Inyushkin ◽  
A. N. Taldenkov ◽  
A. V. Gusev ◽  
A. M. Gibin ◽  
V. A. Gavva ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Single Crystal ◽  
Temperature Range

scholarly journals Магнитная анизотропия игольчатых монокристаллических включений MnSb в матрице InSb

2021 ◽  
Vol 47 (10) ◽  
pp. 46
Author(s):  
А.И. Дмитриев ◽  
А.В. Кочура ◽  
С.Ф. Маренкин ◽  
E. Lahderanta ◽  
А.П. Кузьменко ◽  
...  
Keyword(s):  
Magnetic Anisotropy ◽  
Single Crystal ◽  
Saturation Magnetization ◽  
Power Law ◽  
Anisotropy Constant ◽  
Temperature Range

The magnetic anisotropy of needle-like single-crystal MnSb inclusions in the InSb matrix was determined and studied in the temperature range 5 – 350 K. In granular InSb-MnSb samples a power-law dependence of the anisotropy constant K(T) on the saturation magnetization MS(T) is observed in the temperature range 5 – 350 K with an exponent n = 3.2 ± 0.4 in accordance with the theories developed by Akulov, Zener, and Callens.

scholarly journals Heat capacity of lithium tungstate single crystal by DSC calorimetry data in the temperature range of 319-997 K

2021 ◽  
Vol 2057 (1) ◽  
pp. 012048
Author(s):  
N I Matskevich ◽  
V N Shlegel ◽  
A A Chernov ◽  
D A Samoshkin ◽  
S V Stankus ◽  
...  
Keyword(s):  
Heat Capacity ◽  
Phase Transitions ◽  
Single Crystal ◽  
Weight Control ◽  
Czochralski Technique ◽  
Temperature Range ◽  
First Time ◽  
Lithium Tungstate ◽  
Dsc Calorimetry ◽  
Calorimetry Data

Abstract The heat capacity of lithium tungstate single crystal (Li2WO4) was measured for the first time in the temperature range of 319-997 K. The experiments were carried out by DSC calorimetry. The Li2WO4 single crystal was first grown by low-temperature-gradient Czochralski technique with weight control. The temperature dependence of Li2WO4 heat capacity in the temperature range 319-997 K was monotonic. According to results of our studies, there were no phase transitions in Li2WO4 in the investigated temperature range.

Antiferromagnetic resonance in CuB2O4 single crystal

2000 ◽  
Vol 42 (1) ◽  
pp. 96-102 ◽  
Author(s):  
A. I. Pankrats ◽  
G. A. Petrakovskii ◽  
N. V. Volkov
Keyword(s):  
Single Crystal ◽  
Antiferromagnetic Resonance

Elastic Constants in C-plane of Single Crystal Bi 2Sr 2Ca Cu 208 between 80 K and 260 K

1990 ◽  
Vol 193 ◽  
Author(s):  
Jin Wu ◽  
Yening Wang ◽  
Yifeng Yan ◽  
Zhongxian Zhao
Keyword(s):  
Shear Modulus ◽  
Single Crystal ◽  
Temperature Dependence ◽  
Elastic Constants ◽  
Wide Temperature Range ◽  
Sound Propagation ◽  
Anisotropic Elasticity ◽  
Ultrasonic Velocities ◽  
Temperature Range

ABSTRACTThe temperature dependence of the in-plane C11 C22. C12 and C66 modes between 80 and 260 K of superconducting crystals of Bi2Sr2Ca1Cu208 have been obtained via the measurements of ultrasonic-velocities. The anisotropic elasticity in the a-b plane of single crystal Bi2 Sr2Ca1Cu2O8 is manifest. The shear modulus of sound propagation along the [110] with the polarization has been also calculated and shows an overall trend of softening over a wide temperature range above Tc. The shear modulus C6 6 shows three obvious softening minima around 240–250 K, 150 K and 100 K.

Numerical Analysis of Aerospace Nickel-Based Single-Crystal Superalloy Weldability Part II: Nonequilibrium Solidification Behavior

2021 ◽  
Vol 1018 ◽  
pp. 33-41
Author(s):  
Zhi Guo Gao
Keyword(s):  
Single Crystal ◽  
Weld Pool ◽  
Heat Input ◽  
Dendrite Growth ◽  
Solidification Cracking ◽  
Solidification Temperature ◽  
Temperature Range ◽  
Solidification Temperature Range ◽  
Solid Liquid Interface ◽  
Nonequilibrium Solidification

The thermal metallurgical modeling by coupling of heat transfer model, dendrite selection model, columnar/equiaxed transition (CET) model and nonequilibrium solidification model was further developed to numerically analyze stray grain formation and solidification temperature range on the basis of three criteria of constitutional undercooling, marginal stability of planar front and minimum growth velocity during multicomponent nickel-based single-crystal superalloy weld pool solidification. It is indicated that the primary γ gamma phase microstructure development and solidification cracking susceptibility along the solid/liquid interface are symmetrically distributed throughout the weld pool in (001) and [100] welding configuration. The microstructure development and solidification cracking susceptibility along the solid/liquid interface are asymmetrically distributed in (001) and [110] welding configuration. Appropriate low heat input (low laser power and high welding speed) simultaneously minimizes stray grain formation, grain boundary misorientation and solidification temperature range in the vulnerable [100] dendrite growth region and beneficially maintains single-crystal nature of the material in the [001] epitaxial dendrite growth region to improve the cracking resistance, while high heat input (high laser power and low welding speed) increases the solidification cracking susceptibility to deteriorate weldability and weld integrity. The solidification temperature range in (001) and [110] welding configuration is detrimentally wider than that of (001) and [100] welding configuration due to crystallographic orientation of dendrite growth regardless of heat input. The mechanism of asymmetrical crystallography-dependant solidification cracking because of nonequilibrium solidification behavior is proposed. The elliptical and shallow weld pool shape is less susceptible to solidification cracking for successful crack-free laser welding. Moreover, the promising theoretical predictions agree well with the experiment results. The useful modeling is also applicable to other single-crystal superalloys with similar metallurgical properties during laser welding or laser cladding.

Sign in / Sign up

Export Citation Format

Share Document