THE SULFURIC ACID SOLVENT SYSTEM: PART VII. SOLUTIONS OF SOME TIN(IV) AND LEAD(IV) COMPOUNDS

1966 ◽  
Vol 44 (10) ◽  
pp. 1197-1202 ◽  
Author(s):  
R. J. Gillespie ◽  
R. Kapoor ◽  
E. A. Robinson
Keyword(s):  
Sulfuric Acid ◽  
Sulfonic Acid ◽  
Solvent System ◽  
Lead Tetraacetate ◽  
Benzene Sulfonic Acid ◽  
Tin Compounds ◽  
Cationic Species ◽  
Stannic Acid ◽  
System Part

Solutions of tetramethyl tin trimethyl tin sulfate, di-n-butyl tin diacetate, tetraphenyl tin, and triphenyl tin hydroxide in. 100% sulfuric acid have been investigated by cryoscopic and conductimetric methods. Tetramethyl tin reacts with sulfuric acid with the evolution of methane and the formation of trimethyl tin hydrogensulfate. Trialkyl tin hydrogensulfates and dialkyl tin dihydrogensulfates behave as strong bases. It is probable that the cationic species formed are protonated hydrogensulfates rather than "stannonium" ions. Phenyl-substituted tin compounds are cleaved in sulfuric acid with the formation of benzene sulfonic acid and the complex hexa(hydrogensulfato) stannic acid, H2Sn(HSO4)6, and its anions. Lead tetraacetate gives yellow solutions containing hexa(hydrogensulfato) plumbic acid, H2PB(HSO4O6, and its anions.

THE SULFURIC ACID SOLVENT SYSTEM: PART VIII. SOLUTIONS OF SOME PHOSPHORUS(V) AND VANADIUM(V) COMPOUNDS

1966 ◽  
Vol 44 (10) ◽  
pp. 1203-1210 ◽  
Author(s):  
R. J. Gillespie ◽  
R. Kapoor ◽  
E. A. Robinson
Keyword(s):  
Sulfuric Acid ◽  
Vanadium Pentoxide ◽  
Phosphorus Oxychloride ◽  
Solvent System ◽  
Triethyl Phosphate ◽  
Triphenyl Phosphine ◽  
System Part

It is shown that a number of phosphates ionize in sulfuric acid to give the P(OH)4+ ion. Triphenyl phosphine and triethyl phosphate are fully protonated but phosphorus oxyfluoride and phosphorus oxychloride are shown to be nonelectrolytes.Ammonium metavanadate and vanadium pentoxide give the acid H[VO(HSO4)4] and there is evidence that the dimer H[V2O3(HSO4)6] and possibly higher polymers are present in increasing amounts with increasing concentration.

Improved synthesis of anti-sesquinorbornene

1984 ◽  
Vol 62 (9) ◽  
pp. 1840-1844 ◽  
Author(s):  
Karl R. Kopecky ◽  
Alan J. Miller
Keyword(s):  
Acetic Acid ◽  
Sulfuric Acid ◽  
Carboxylic Acid ◽  
Lead Tetraacetate ◽  
Carboxyl Group ◽  
Silver Acetate ◽  
Benzenesulfonyl Chloride ◽  
Methoxide Ion ◽  
Hydrolysis Of ◽  
Monomethyl Ester

Treatment of methyl hydrogen decahydro-1,4:5,8-exo,endo-dimethanonaphthalene-4a,8a-dicarboxylate with lead tetraacetate in benzene – acetic acid replaces the carboxyl group by an acetoxy group. Hydrolysis of this product with 25% sulfuric acid at 130 °C forms 8a-hydroxydecahydro-1,4:5,8-exo,endo-dimethanonaphthalene-4a-carboxylic acid 10. The reaction between 10 and benzenesulfonyl chloride in pyridine containing triethylamine at 95 °C produces anti-sesquinorbornene 1 in 34% yield. In the absence of triethylamine 1 is converted to the hydrochloride. The iodohydroperoxide of 1 is converted by silver acetate at 0 °C to the diketone in a luminescent reaction. The 1,2-dioxetane could not be isolated. Decahydro-1,4:5,8-exo,exo-dimethanonaphthalene-4a,8a-dicarboxylic anhydride is converted slowly by methoxide ion in methanol at 150 °C to the monomethyl ester which then undergoes demethylation. The isomeric exo,endo anhydride undergoes reaction readily with methoxide ion at 80 °C.

scholarly journals Effect of Rejuvenator Containing Dodecyl Benzene Sulfonic Acid (DBSA) on Physical Properties, Chemical Components, Colloidal Structure and Micro-Morphology of Aged Bitumen

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1476 ◽  
Author(s):  
Dongliang Kuang ◽  
Zhou Ye ◽  
Lifeng Yang ◽  
Ning Liu ◽  
Zaihong Lu ◽  
...  
Keyword(s):  
Thin Film ◽  
Physical Properties ◽  
Sulfonic Acid ◽  
Chemical Components ◽  
Structure Transformation ◽  
Colloidal Structure ◽  
Benzene Sulfonic Acid ◽  
Oven Test ◽  
Dodecyl Benzene Sulfonic Acid ◽  
Micro Morphology

DBSA was used as a solubilizer together with conventional rejuvenator (CR) to produce a solubilized rejuvenator (SR), two kinds of aged bitumen involving TFOT aged bitumen and PAV aged bitumen were obtained by thin film oven test (TFOT) and pressurized aging vessel (PAV), respectively. Effects of CR and SR on the physical properties, chemical components, colloidal structure and micro-morphology of TFOT aged bitumen and PAV aged bitumen were investigated. Testing results of physical properties and chemical components indicated that CR and SR can replenish aged bitumen with necessary aromatics, TFOT aged bitumen that chemical component variation deteriorates its physical properties. With regard to PAV aged bitumen, of which the performance attenuation lies in chemical components variation and colloidal structure transformation, even if the content of CR reached up to 10 wt %, the regenerated bitumen cannot meet the regeneration requirement yet due to its definite influence on colloidal structure transformation, comparatively, sulfonic group in SR can react with the superficial atoms of asphaltenes to reform a solvation layer to facilitate the colloidal structure transformation of PAV aged bitumen, performance and beelike structure of regenerated PAV aged with bitumen with 10 wt % SR were approximated to that of virgin bitumen.

scholarly journals Initial steps in the degradation of benzene sulfonic acid, 4-toluene sulfonic acids, and orthanilic acid in Alcaligenes sp. strain O-1

1990 ◽  
Vol 1 (1) ◽  
pp. 55-64 ◽  
Author(s):  
Thomas Thurnheer ◽  
Daniel Z�rrer ◽  
Otmar H�glinger ◽  
Thomas Leisinger ◽  
Alasdair M. Cook
Keyword(s):  
Sulfonic Acid ◽  
Sulfonic Acids ◽  
Benzene Sulfonic Acid ◽  
Orthanilic Acid

The trifluoroacetic acid solvent system. Part V. Cryoscopic measurements

1976 ◽  
Vol 54 (19) ◽  
pp. 3031-3037 ◽  
Author(s):  
Michael G. Harriss ◽  
John B. Milne
Keyword(s):  
Trifluoroacetic Acid ◽  
Dissociation Constants ◽  
Freezing Point ◽  
Solvent System ◽  
Ion Pair ◽  
Conductivity Measurements ◽  
Cast Doubt ◽  
System Part ◽  
Triple Ions ◽  
Cryoscopic Constant

Measurement of freezing point depressions for the non-electrolytes, CCl4. CH3SO2F, and (CF3CO)2O permit calculation of the cryoscopic constant for trifluoroacetic acid, HOTFA. Water is shown to give freezing point depressions lower than those for non-electrolytes and this is attributed to association. Freezing point depressions for NaOTFA, KOTFA, and CsOTFA have been measured and accounted for in terms of ion-pair dissociation constants previously determined from electrical conductivity measurements. The results cast doubt on the existence of triple ions in this solvent.

Sign in / Sign up

Export Citation Format

Share Document