Synthesis and characterization of Pt(II) complexes containing the bidentate pyrazolylgallate ligand, [Me2Gapz2]−

1985 ◽  
Vol 63 (9) ◽  
pp. 2550-2554 ◽  
Author(s):  
Sophia Nussbaum ◽  
Alan Storr
Keyword(s):  
Variable Temperature ◽  
Synthesis And Characterization ◽  
Direct Reaction ◽  
H Nmr ◽  
Nmr Methods

The complexes [Me2Mpz2]Pt(Me)L (where L = CO, Ph3P, or PhC≡CPh for M = Ga; L = PhC≡CPh for M = B) have been synthesized by the direct reaction of the ligands Na[Me2Mpz2] with Pt(Me)Cl(COD) followed by the addition of ligand L. The complexes have been shown to be fluxional in solution by variable temperature 1H nmr methods.

Synthesis and Characterization of Cu(II) and Mono-and Dinuclear Pb(II) Complexes Derived from 3,5-Diacetyl-1,2,4-triazole

1994 ◽  
Vol 49 (5) ◽  
pp. 665-671 ◽  
Author(s):  
P. Souza ◽  
A. I. Matesanz ◽  
A. Arquero ◽  
V. Fernandez
Keyword(s):  
Mass Spectra ◽  
Analytical Data ◽  
Synthesis And Characterization ◽  
Dinuclear Complexes ◽  
Direct Reaction ◽  
Analogous Reaction ◽  
Metal Free ◽  
H Nmr

Template 1:1 condensation of 3,5-diacetyl-1,2,4-triazole with thiocarbohydrazide or car- bohydrazide in the presence of 1 equivalent of Pb(SCN)2 produces mononuclear [2 + 1] com­plexes 1 and 3. The analogous reaction with thiosemicarbazide and semicarbazide produces the dinuclear [1+2] complex 2 and the mononuclear metal free 4. The carbohydrazide deriva­tive 3 reacts with the carbohydrazide or the 1,3-diaminopropane to yield the macrocyclic dinuclear complexes 5 and 6. Direct reaction of 3,5-diacetyl-1,2,4-triazole with thiocarbohydrazide. carbohydrazide, thiosemicarbazide and semicarbazide leads to open [1+1] ligands L1, L2, L3, L4, and closed [1+1] ligands (mesocyclic ligands) L5 and L6 were prepared by addition of 1 equivalent of LiOH to the reaction mixture. The reaction of open and mesocyclic [1+1] ligands with copper(II) salts gives [CuLX2] and [Cu2+L2-] complexes. All these compounds have been characterized by 1H NMR, IR, electronic and mass spectra and by analytical data.

Phenylsilane dehydrocoupling and addition to styrene catalyzed by (R-indenyl)Ni(phosphine)(methyl) complexes

2009 ◽  
Vol 87 (1) ◽  
pp. 280-287 ◽  
Author(s):  
Yaofeng Chen ◽  
Davit Zargarian
Keyword(s):  
Solid State ◽  
Nmr Spectra ◽  
Variable Temperature ◽  
Structural Parameters ◽  
Catalytic Cycle ◽  
Synthesis And Characterization ◽  
H Nmr ◽  
Solid State Structures ◽  
Indenyl Complexes

This report describes the synthesis and characterization of the Ni–Me complexes (R-indenyl)Ni(PR′3)Me (R = 1-i-Pr, 1-SiMe3, and 1,3-(SiMe3)2; R′= Me, Ph) and outlines their catalytic reactivities in the dehydrogenative oligomerization of PhSiH3 and its addition to styrene in the absence of initiators/activators. Observation of higher hydrosilylation activities for PPh3-based compounds featuring bulky substituents on the indenyl ligand confirms earlier suggestions that phosphine dissociation is an important component of the catalytic cycle for this reaction. In contrast, oligomerization of PhSiH3 is more facile with PMe3-based precursors and independent of the steric bulk of the indenyl ligand, implying that this reaction does not involve phosphine dissociation. These conclusions are consistent with the variable-temperature 1H NMR spectra of {1,3,-(SiMe3)2-indenyl}Ni(PR′3)Me and various structural parameters observed in the solid-state structures of {1,3,-(SiMe3)2-indenyl}Ni(PPh3)Me, {1,3,-(SiMe3)2-indenyl}Ni(PMe3)Cl, and {1-SiMe3-indenyl}Ni(PMe3)Me.Key words: nickel-indenyl complexes, hydrosilylation, hydrosilane oligomerization.

Iridium(I) complexes containing bidentate pyrazolylgallate ligands. X-ray crystal structures of [Me2Gapz2]Ir(COD), [Ir(μ-pz)(CO)2]2, and [Ir(μ-3,5-Me2pz)(CO)2]2

1985 ◽  
Vol 63 (3) ◽  
pp. 692-702 ◽  
Author(s):  
Sophia Nussbaum ◽  
Steven J. Rettig ◽  
Alan Storr ◽  
James Trotter
Keyword(s):  
Crystal Structures ◽  
Variable Temperature ◽  
Hydrogenation Reaction ◽  
Synthesis And Characterization ◽  
Nmr Studies ◽  
X Ray ◽  
H Nmr ◽  
Measurable Activity

The synthesis and characterization of a number of Ir(I) complexes incorporating bidentate, chelating, pyrazolylgallate ligands are described. Non-rigidity for some of the complexes in solution has been demonstrated by variable temperature 1H nmr studies. Crystal structures of three complexes, [Me2Gapz2]Ir(COD), [Ir(μ-pz)(CO)2]2, and [Ir(μ-3,5-Me2pz)(CO)2]2 are reported and confirm the expected boat conformations for the six-membered M—(N—N)2—Ir rings (where M = Ir or Ga) in the compounds. One of the complexes studied has exhibited measurable activity as a catalyst in the hydrogenation reaction of cyclohexene.

Synthesis and Characterization of Chiral Poly(Amide-Imide) Containing L-Alanine

2011 ◽  
Vol 282-283 ◽  
pp. 116-119
Author(s):  
Zhi Yong Yang ◽  
Jin Shui Yao ◽  
Rui Bao Guo
Keyword(s):  
Acetic Acid ◽  
Specific Rotation ◽  
Synthesis And Characterization ◽  
Direct Reaction ◽  
Tetracarboxylic Acid ◽  
Direct Polycondensation ◽  
Polycondensation Reaction ◽  
H Nmr ◽  
Ft Ir

A novel chiral poly(amide imide) containing L-alanine was synthesized by direct polycondensation reaction of newly synthesized N,N’-(4,4’-diphthaloyl)-bis-L-alanine diacid with 4,4’-diaminodiphenyl ether in a medium consisting of N-methyl-2-pyrrolidone (NMP), triphenylphosphite (TPP), calcium chloride (CaCl2), and pyridine. The new chiral diimide-diacid monomer was synthesized by direct reaction of 3,3’-4,4’-Biphenyl tetracarboxylic acid dianhydride with L-alanine in acetic acid under refluxing conditions. The resulting compounds were obtained in quantitative yields and high purity. The synthetic diacid monomer was characterized by elemental analysis,1H-NMR spectroscopy, FT-IR techniques and specific rotation, the obtained polymer was characterized by FTIR techniques, specific rotation and solubility testing.

Synthesis and characterization of novel chiral derivatizing agents containing β-keto-anthracene adducts (KAAs) by 1H-NMR: aromatic influence and chiral alcohol absolute configuration determination

2019 ◽  
Vol 17 (3) ◽  
pp. 541-554
Author(s):  
Neeranuth Intakaew ◽  
Puracheth Rithchumpon ◽  
Chanatkran Prommin ◽  
Saranphong Yimklan ◽  
Nawee Kungwan ◽  
...  
Keyword(s):  
1H Nmr ◽  
Absolute Configuration ◽  
Synthesis And Characterization ◽  
Chiral Alcohols ◽  
Chiral Alcohol ◽  
Aromatic Rings ◽  
H Nmr ◽  
Chiral Derivatizing Agents

New chiral derivatizing agents and the effect of aromatic rings were investigated for absolute configuration of chiral alcohols via1H-NMR.

scholarly journals Synthesis and characterization of different soybean oil-based polyols with fatty alcohol and aromatic alcohol

e-Polymers ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 491-499
Author(s):  
Fukai Yang ◽  
Hao Yu ◽  
Yuyuan Deng ◽  
Xinyu Xu
Keyword(s):  
Molecular Weight ◽  
Soybean Oil ◽  
Retention Time ◽  
Ring Opening ◽  
Isoamyl Alcohol ◽  
Synthesis And Characterization ◽  
Intermolecular Force ◽  
H Nmr ◽  
Epoxy Groups

Abstract In this article, five kinds of soybean oil-based polyols (polyol-E, polyol-P, polyol-I, polyol-B, and polyol-M) were prepared by ring-opening the epoxy groups in epoxidized soybean oil (ESO) with ethyl alcohol, 1-pentanol, isoamyl alcohol, p-tert-butylphenol, and 4-methoxyphenol in the presence of tetrafluoroboric acid as the catalyst. The SOPs were characterized by FTIR, 1H NMR, GPC, viscosity, and hydroxyl numbers. Compared with ESO, the retention time of SOPs is shortened, indicating that the molecular weight of SOPs is increased. The structure of different monomers can significantly affect the hydroxyl numbers of SOPs. Due to the large steric hindrance of isoamyl alcohol, p-hydroxyanisole, and p-tert-butylphenol, SOPs prepared by these three monomers often undergo further dehydration to ether reactions, which consumes the hydroxyl of polyols, thus forming dimers and multimers; therefore, the hydroxyl numbers are much lower than polyol-E and polyol-P. The viscosity of polyol-E and polyol-P is much lower than that of polyol-I, polyol-B, and polyol-M. A longer distance between the molecules and the smaller intermolecular force makes the SOPs dehydrate to ether again. This generates dimer or polymers and makes the viscosity of these SOPs larger, and the molecular weight greatly increases.

scholarly journals Synthesis and Characterization of Polyphosphazenes Modified with Hydroxyethyl Methacrylate and Lactic Acid

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Evelyn Carolina Martínez Ceballos ◽  
Ricardo Vera Graziano ◽  
Gonzalo Martínez Barrera ◽  
Oscar Olea Mejía
Keyword(s):  
Lactic Acid ◽  
Ring Opening ◽  
Room Temperature ◽  
Block Structure ◽  
Ring Opening Polymerization ◽  
Synthesis And Characterization ◽  
Poly Lactic Acid ◽  
Hydroxyethyl Methacrylate ◽  
H Nmr

Poly(dichlorophosphazene) was prepared by melt ring-opening polymerization of the hexachlorocyclotriphosphazene. Poly[bis(2-hydroxyethyl-methacrylate)-phosphazene] and poly[(2-hydroxyethyl-methacrylate)-graft-poly(lactic-acid)-phosphazene] were obtained by nucleophilic condensation reactions at different concentrations of the substituents. The properties of the synthesized copolymers were assessed by FTIR,1H-NMR and31P-NMR, thermal analysis (DSC-TGA), and electron microscopy (SEM). The copolymers have a block structure and show twoTg's below room temperature. They are stable up to a temperature of 100°C. The type of the substituents attached to the PZ backbone determines the morphology of the polymers.

Synthesis and characterization of a sulfur-containing phthalocyanine-gold nanoparticle hybrid

2015 ◽  
Vol 19 (01-03) ◽  
pp. 335-343 ◽  
Author(s):  
Vicente M. Blas-Ferrando ◽  
Javier Ortiz ◽  
Fernando Fernández-Lázaro ◽  
Ángela Sastre-Santos
Keyword(s):  
Gold Nanoparticle ◽  
Lipoic Acid ◽  
Zinc Phthalocyanine ◽  
Synthesis And Characterization ◽  
Ligand Exchange Reaction ◽  
H Nmr ◽  
Fluorescence Measurements ◽  
Transmission Electron ◽  
Yield Values

This work reports on the synthesis and characterization of a new gold nanoparticle-zinc phthalocyanine system, AuNP - S (t Bu )3 ZnPc , prepared by a ligand exchange reaction of tetraoctylammonium bromide with a novel unsymmetrically substituted zinc phthalocyanine which contains one thioester group in the peripheral position [ AcS (t Bu )3 ZnPc ]. The AuNP - S (t Bu )3 ZnPc hybrid was characterized using UV-vis and 1 H NMR spectroscopies. Transmission electron microscopy allowed the estimation of the size, which was calculated to be ~5 nm. AuNPs - S (t Bu )3 ZnPc conjugate showed much lower fluorescence quantum yield values than the AcS (t Bu )3 ZnPc demonstrating either an energy or electron transfer from the ZnPc to the AuNP . The AuNP - S (t Bu )3 ZnPc hybrid has been anchored to a TiO 2 semiconducting layer using lipoic acid. A solid configuration of TiO 2-lipoic acid- AuNP - S (t Bu )3 ZnPc has been prepared by anchoring lipoic acid to the TiO 2 ( TiO 2-LA) and introducing later the TiO 2-LA with free thiol groups in a toluene solution of AuNP - S (t Bu )3 ZnPc . We have also observed by UV-vis and fluorescence measurements the importance of the ZnPc in avoiding AuNP aggregation on the TiO 2 surface.

Electrochemically Synthesis and Characterization of Copolymers Based on 1, 4-Diethoxybenzene and 3, 4-Ethylenedioxythiophene

2011 ◽  
Vol 335-336 ◽  
pp. 989-993
Author(s):  
Mi Ouyang ◽  
Zhen Wei Yu ◽  
Yi Xu ◽  
Yu Jian Zhang ◽  
Cheng Zhang
Keyword(s):  
Cyclic Voltammetry ◽  
Ir Spectroscopy ◽  
Feed Ratio ◽  
Synthesis And Characterization ◽  
Monomer Mixture ◽  
Long Wavelength ◽  
H Nmr ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Copolymers based on 1, 4-diethoxybenzene (DEB) and 3, 4-ethylenedioxythiophene (EDOT) were electrochemically synthesized and characterized. The structures of the copolymers were established by 1H NMR and FT-IR spectroscopy. The results indicated the final product was a copolymer instead of a blend or a composite. The physical properties were systematically investigated by cyclic voltammetry, UV-vis absorption and fluorescence. The PL maximum of copolymers presented obviously red-shift to long wavelength as the feed ratio of EDOT in monomer mixture increased.

Sign in / Sign up

Export Citation Format

Share Document