Analytic derivative theory based on the Hellmann–Feynman theorem

1992 ◽  
Vol 70 (2) ◽  
pp. 434-442 ◽  
Author(s):  
K. Hirao

General formulae for the second, third, and fourth derivatives of the energy with respect to the nuclear coordinates of a molecule are derived from the Hellmann–Feynman theorem. Hurley's condition is used to obtain approximations to the first-order wavefunction, from which the second, third, and fourth energies can be obtained, leading to quadratic, cubic, and quartic force constants. The procedure is equivalent to minimizing the derivative energy by perturbed variation techniques. The expressions for these higher energy derivatives are much simpler than those of the direct analytic derivative method. The electrostatic calculation involves only one-electron integrals. The coupled Hartree–Fock equations to obtain the wavefunction derivatives become much simpler. The present theory provides a great conceptual simplification. However, the theory is correct only if the basis set is complete or basis functions are independent of the perturbation. Keywords: analytic derivative theory, Hellmann–Feynman theorem, force constants, the curvature theorem.

Author(s):  
Mohammad Tamsir ◽  
Neeraj Dhiman ◽  
F.S. Gill ◽  
Robin

This paper presents an approximate solution of 3D convection diffusion equation (CDE) using DQM based on modified cubic trigonometric B-spline (CTB) basis functions. The DQM based on CTB basis functions are used to integrate the derivatives of space variables which transformed the CDE into the system of first order ODEs. The resultant system of ODEs is solved using SSPRK (5,4) method. The solutions are approximated numerically and also presented graphically. The accuracy and efficiency of the method is validated by comparing the solutions with existing numerical solutions. The stability analysis of the method is also carried out.


The interpretation of the circular dichroism (c. d.) of coordination compounds is discussed with particular reference to the ligand field transitions of d 3 and low-spin d 6 systems. The experimental crystal spectra indicate by their large intensities that the solution spectra have to be interpreted on the basis of large cancellations caused by the overlapping of positive and negative c. d. contributions from closely lying energy levels. Some quantitative consequences of this have been derived. Symmetry considerations and the angular overlap model have been applied to tris(bidentate) and cis -bis(bidentate) chromophores which in most cases have been considered ortho-axial except for the perturbation due to the chelation. This perturbation and the chirality caused by the chelation have been described in terms of the small angular parameters ( δ and ϵ ) which represent a displacement of the ligating atoms, the ligators, away from the ortho-axial positions. The molecular orbital orientation of the angular overlap model has been demonstrated, and the ligand field perturbation within this model has been given as a sum of a σ and two different π contributions, corresponding to ligator π orbitals vertical and parallel to the plane of the chelating ligands. For the σ part of the perturbation, which is considered the most important part, the matrix elements connecting orbitals within each cubic subset ( e and t 2 ), for some matrix elements in contrast with the results of the electrostatic model, do not depend on δ and ϵ to first order. However, e and t 2 orbitals are connected by σ terms, first order in δ and ϵ . The perturbation energies can also be separated in a different way, also in order of decreasing importance, the regularly octahedral perturbation, the non-octahedral orthoaxial perturba­tion and finally the perturbation due to chelation. It is recommended to treat d n systems by considering first and together the effect of the octahedral part of the perturbation and that caused by the interelectronic repulsion, and diagonalize with respect to these two perturba­tions before the smaller perturbation contributions are considered. This can be done within the expanded radial function model, which considers the interelectronic repulsion parametrizable as in spherical symmetry. With the purpose of illuminating this the field strength series of ligands, ordering the ligands according to their values of ∑ = ∆/ B Racah , has been given. ∑ is the parameter of the expanded radial function model which determines the extent of the mixing of pure cubic subconfigurations. The symmetry restrictions imposed upon ligand field operators in order to make them able to contribute to rotational strengths are discussed on the basis of a rotational strength pseudo tensor. When this is expressed with respect to our standard basis functions it can be written as a symmetrical matrix with the same symmetry properties as the corresponding energy matrix except for sign changes by improper rotations. The parentage problem for inter­relating absolute configurations is discussed also on the basis of the tensor. A comparison between the results of the angular overlap model and those of the electro­static model is made. Throughout the usual real d -functions have served as our limited basis set, and these functions together with the real p -functions define the standard octahedral irreducible representations. Functions belonging to these standard octahedral bases are generally not symmetry adapted with respect to our whole gerade perturbation, but they are symmetry adapted to the main part of it, the (holohedrized) octahedral part. Re-diagonalization of the whole perturbation with respect to functions which are diagonal for the combined perturba­tions of the holohedrized octahedral ligand field and the interelectronic repulsion, has the advantage of moving by far most of the gerade lower symmetry perturbation into the diagonal. This means that the energy levels become described almost completely by linear combina­tions of our standard cubic basis functions which belong to the same irreducible representa­tion of the octahedral group, but which are symmetry adapted to the whole perturbation. These functions will, in general, be connected by small non-diagonal elements which mix the purely gerade-cubic levels. Since the polarization properties of the c. d. are governed by the directions of the magnetic dipole transition moments involved, they can be directly obtained for the linear combinations mentioned, on the basis of the very simple polarization properties of the standard cubic basis components.


2017 ◽  
Vol 17 (2) ◽  
pp. 184-189
Author(s):  
G.S. Beloglazov ◽  
S.A. Teryusheva ◽  
S.M. Beloglazov

The results of quantum chemical computations of isolated molecules(derivatives of 1,4-quinone) performed by using restricted Hartree-Fock (RHF)method with the aid of Gaussian94 software in 3-21G basis set, are reported.Correlation coefficients between quantum chemical characteristics (QCC) of themolecules of inhibitors of corrosion and hydrogen absorption of steel St3 andexperimentally measured efficiencies of such species as the inhibitors in SRBcontaining media, have been calculated.


2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Shahabuddin N. Alvi ◽  
Mehul N. Patel ◽  
Prakash B. Kathiriya ◽  
Bhavna A. Patel ◽  
Shraddha J. Parmar

Two simple, accurate, and precise UV derivative spectrophotometric methods for the simultaneous determination of Prasugrel and Aspirin in synthetic mixture form have been developed. The first method involves measurement of second order derivative spectra of Prasugrel and Aspirin. The zero crossing wavelengths 267.62 nm and 252.40 nm were selected for estimation of Prasugrel and Aspirin, respectively. In the second method, the first order derivatives of ratio spectra were calculated and used for the determination of Prasugrel and Aspirin by measuring the peak intensity at 268 nm and 290 nm, respectively. The methods were validated as per the ICH guideline Q2 (R1). Beer’s law is followed in the range of 5–45 μg/mL for Prasugrel and 25–150 μg/mL for Aspirin by second order derivative method and 6–22 μg/mL for Prasugrel and 45–165 μg/mL for Aspirin by ratio first order derivative method. The recovery studies confirmed the accuracy of the methods. Relative standard deviations for repeatability and inter- and intraday assays were less than 2%. Hence, the described derivative spectrophotometric methods are simple, accurate, precise, and excellent alternatives to sophisticated chromatographic techniques and can be potentially used for the simultaneous determination of Prasugrel and Aspirin in combined dosage form.


1999 ◽  
Vol 579 ◽  
Author(s):  
Mamoun M. Bader

ABSTRACTWe report herein the results of coupled perturbed Hartree-Fock (CPHF) ab initio extended basis set calculations on the geometric structures, dipole moments, static first-order (α), second-order (β), and third-order polarizabilities (λ) of a series of fused heterocyclic aromatic compounds based on quinoline. The effects of the presence/absence of the heteroatom as well as the introduction of other substituents at various positions in the ring system on these molecular properties are described. The effect of the presence of N-oxide is also examined. Suggestions for the design of heterocyclic systems with enhanced polarizabilities are made.


1970 ◽  
Vol 25 (6) ◽  
pp. 816-822
Author(s):  
Horst Frühbeis ◽  
Friedrich Franz Seelig

Abstract Approximate solutions of the original Hartree-Fock-equation for the ground state of closed-shell molecules of arbitrary symmetry are attained by a combined numerical-analytical method. In a first step the one electron Schrödinger-equation for a conveniently guessed potential is solved by a numerical method described in previous papers. These MOs are approximated by linear combinations of basis functions of Gaussian type (GTF) in a variant of curve fitting varying all parameters of the GTFs. Principally they serve only to calculate the Coulomb and exchange potentials that are fed back into the conventional iterative procedure, but they can be used as an optimum basis set derived in an independent manner. Computations are made by a Fortran-IV program whose structure is briefly sketched. BH3 is used as a test substance.


Sign in / Sign up

Export Citation Format

Share Document