Data Envelopment Analysis with Output-Bounded Data

2016 ◽  
Vol 33 (06) ◽  
pp. 1650050 ◽  
Author(s):  
Juan Du ◽  
Jiazhen Huo ◽  
Joe Zhu

In conventional data envelopment analysis (DEA), data are usually assumed to be non-negative with no specific bounds. However, many practical applications require some data, and thus their projections, to fall within certain limits. For example, percentage data such as the satisfactory rate cannot exceed 100% to make sense. This data characteristic is very likely to be violated under the assumption of constant returns to scale (CRS), due to its ray expansion property. In order to tackle this issue under CRS, a series of radial models are developed to constrain DEA projections within imposed bounds from the output side. Then efficient decision making units (DMUs) can be further discriminated simply by eliminating it from the reference set, avoiding the infeasibility problem existing in the VRS super-efficiency measures. The methodology is demonstrated with data consisting of 119 general acute care hospitals located in Pennsylvania, USA.

2020 ◽  
Vol 23 (2) ◽  
pp. 60-66
Author(s):  
Ahmed Nourani ◽  
Abdelaali Bencheikh

AbstractAlgeria has recently experienced an important agricultural development in terms of gardening in plastic greenhouses thanks to the favourable factors (climatic conditions, etc.). In order to optimize the energy requirements, data from 29 farmers were collected, who qualitatively represent the greenhouse vegetable producers from the most productive sub-provinces of Biskra region (south of Algeria). Considering the various parametric and non-parametric methods for energy consumption optimization, data envelopment analysis is the most common non-parametric method applied. Results showed that the mean radial technical efficiency assumptions of the samples under constant returns to scale and variable returns to scale models were 0.88 and 0.98, respectively. The 51.72% of decision-making units were efficient on the basis of the constant returns to scale model; 79.31% decision-making units were observed efficient on the basis of variable returns to scale model. Calculation of optimal energy requirements for vegetable greenhouse indicated that 108.50 GJ·ha−1 can be saved on machinery (1.38 GJ·ha-1); diesel fuel (4.68 GJ·ha−1); infrastructure (9.35 GJ·ha−1); fertilizers (17.08 GJ·ha−1); farmyard manure (12.05 GJ·ha−1); pesticides (3.93 GJ·ha−1); and electricity (60.03 GJ·ha−1).


2013 ◽  
Vol 13 (4) ◽  
pp. 99-103 ◽  
Author(s):  
Chia-Hui Ho

Abstract Operating performance could affect the survival and future development of a business that both businesses and business managers would devote to the enhancement of operating performance. Having developed for more than four decades, the consistent upstream, mid-stream and downstream system have been constructed in domestic textile industry. The output value of textiles in Taiwan has exceeded 480 billion NT dollars, which is not a sunset industry, as generally described. The impacts of high labour cost, environmental protection measures and changes of capital market as well as the competition of emerging countries, particularly Mainland China, have made textile industry in Taiwan face great market competition and pressure. Since textiles are regarded as one of the major products in Taiwan, the operating performance could affect the survival of the overall industry. In this case, operating performance survey of textile manufacturers in Taiwan during 2010–2012 is combined with Data Envelopment Analysis and Slack Variable Analysis to measure the total efficiency, pure technical efficiency and scale efficiency of top 12 textile manufacturers in Taiwan, tending to provide the reference of operating efficiency improvement for the manufacturers. The empirical results show that the overall efficiency in the 3 years appears 0.89 averagely. The relative efficiency (1) between two manufacturers, Far Eastern New Century and Ruentex Industries, achieves the optimal operating efficiency, whereas the remaining 10 are comparatively worse. Regarding the analysis of returns to scale, two textile manufacturers present constant returns to scale, with the optimal operating efficiency, whereas the remaining 10 show increasing returns to scale, revealing that expanding the scale could enhance the marginal return and further promote the efficiency.


2012 ◽  
Vol 29 (02) ◽  
pp. 1250010 ◽  
Author(s):  
G. R. JAHANSHAHLOO ◽  
J. VAKILI ◽  
S. M. MIRDEHGHAN

Evaluating group performance of decision-making units (DMUs) is an application of data envelopment analysis (DEA) and usually provides a measure to compare the frontiers of the production possibility sets (PPSs) corresponding to different groups and the internal inefficiencies of DMUs associated with their group. In this paper, first, a method is presented for obtaining the minimum distance of DMUs from the frontier of the PPS by ‖⋅‖1, which itself can be a very important subject in DEA, and then, for stating an application of these distances, an approach is provided for evaluating group performance of DMUs based on the production ability of the PPSs such that both constant and variable returns to scale assumptions can be used in this method in contrast with some other methods. Therefore, providing the methods for both obtaining the minimum distance of DMUs from the frontier of the PPS and evaluating group performance of DMUs is the most important contribution of this paper.


Author(s):  
Yinka Oyerinde ◽  
Felix Bankole

A lot of research has been done using Data Envelopment Analysis (DEA) to measure efficiency in Education. DEA has also been used in the field of Information and Communication Technology for Development (ICT4D) to investigate and measure the efficiency of Information and Communication Technology (ICT) investments on Human Development. Education is one of the major components of the Human Development Index (HDI) which affects the core of Human Development. This research investigates the relative efficiency of ICT Infrastructure Utilization on the educational component of the HDI in order to determine the viability of Learning Analytics using DEA for policy direction and decision making. A conceptual model taking the form of a Linear Equation was used and the Constant Returns to Scale (CRS) and Variable Returns to Scale (VRS) models of the Data Envelopment Analysis were employed to measure the relative efficiency of the components of ICT Infrastructure (Inputs) and the components of Education (Outputs). Results show a generally high relative efficiency of ICT Infrastructure utilization on Educational Attainment and Adult Literacy rates, a strong correlation between this Infrastructure and Literacy rates as well, provide an empirical support for the argument of increasing ICT infrastructure to provide an increase in Human Development, especially within the educational context. The research concludes that DEA as a methodology can be used for macroeconomic decision making and policy direction within developmental research.


2018 ◽  
Vol 2 (3) ◽  
pp. 27 ◽  
Author(s):  
Shanta Mazumder ◽  
Golam Kabir ◽  
M. Hasin ◽  
Syed Ali

Measuring productivity is the systematic process for both inter- and intra-organizational comparisons. The productivity measurement can be used to control and facilitate decision-making in manufacturing as well as service organizations. This study’s objective was to develop a decision support framework by integrating an analytic network process (ANP) and data envelopment analysis (DEA) approach to tackling productivity measurement and benchmarking problems in a manufacturing environment. The ANP was used to capture the interdependency between the criteria taking into consideration the ambiguity and vagueness. The nonparametric DEA approach was utilized to determine the input-oriented constant returns to scale (CRS) efficiency of different value-adding production units and to benchmark them. The proposed framework was implemented to benchmark the productivity of an apparel manufacturing company. By applying the model, industrial managers can gain benefits by identifying the possible contributing factors that play an important role in increasing the productivity of manufacturing organizations.


2017 ◽  
Vol 36 (2) ◽  
Author(s):  
Siti Fatimah ◽  
Umi Mahmudah

This study aims to measure the performance efficiency of elementary schools in Special Capital Region of Jakarta, especially Central Jakarta district in the period 2014/2015 by using data envelopment analysis (DEA) approach. DEA is a non-parametric method to measure efficiency of decision making units (DMUs). DEA compares several homogeneous DMUs based on a number of inputs to produce the expected outputs. This study uses descriptive method using DMU as many as 103 public elementary schools that are A-accredited with three inputs and four outputs. Data is analyzed using DEAP version 2.1 application by comparing CRS (Constant Returns to Scale) model and VRS (Variable Returns to Scale) model. Results show that: 1) in CRS model, there are 8 public elementary schools (7.77 percent) have efficient performances while in VRS model there are 14 public elementary schools (13.59 percent) have efficient performances; 2) VRS model is better than CRS model in measuring the efficiency performance of public elementary schools in Central Jakarta.


2015 ◽  
Vol 6 (3) ◽  
pp. 49-64 ◽  
Author(s):  
Mohamad Amin Kaviani ◽  
Mehdi Abbasi

This paper introduces a new robust data envelopment analysis (RDEA) approach for analyzing and ranking the organizations' operations strategies. In the proposed RDEA method, pessimistic and optimistic efficiencies of decision making units (DMUs) obtained from the robust counterpart of the envelopment form and the optimistic counterpart of the multiplier form of DEA are introduced. The inputs and outputs data are assumed to be bounded data (interval numbers) in the proposed models. A case study in the cement industry is presented to demonstrate the applicability of the proposed RDEA approach. The results obtained from the authors' proposed RDEA approach is more robust and their method provides a more complete ranking of the DMUs compared to conventional Likert-based DEA model.


2020 ◽  
Vol 14 (3) ◽  
pp. 332-352
Author(s):  
Abdulai Adams ◽  
Bedru Balana ◽  
Nicole Lefore

This study measures and explains technical efficiency (TE), economic efficiency and allocative efficiency of 110 small-scale vegetable farmers practicing various irrigation technologies for increased productivity. We employed the two-stage approach to estimate efficiency scores under constant returns to scale (CRS) and variable returns to scale (VRS) specifications. First, using a linear programming method, efficiency scores of the irrigated vegetable farmers were measured using the data envelopment analysis approach. The results show that about 27.3 per cent of the farmers currently operate on the production possibility frontier and are technically efficient, while 3.6 per cent were found to be both economically and allocatively efficient. The mean TE score for CRS was 50.6 per cent, compared with 78.1 per cent under the VRS. A Tobit regression at the second-stage analysis revealed that gender, experience, health and credit utilization have significant effects on TE. These results are valuable for stakeholders interested in promoting efficiency in smallholder irrigated production. JEL Classification: C14, C61, D24, D61, Q12


Author(s):  
V. Prakash ◽  
J. Rajesh ◽  
M. Thilagam

Data envelopment analysis (DEA) is a method of analyzing the relative efficiency of similar types of organizations known as decision making units (DMU’s). In this paper, DEA model is applied to evaluate the relative technical efficiency of state road transport undertakings (SRTU’s) in India during the period 2011-2012. The authors have considered thirty-four SRTU’s functioning in India. The variables chosen to characteristic production units are the number of fleet held, staff strength and fuel efficiency as inputs and Passengers carried as output. The BCC model is input- oriented allowing for variable returns to scale (VRS), units are ranked and the projection analyses are given.


Sign in / Sign up

Export Citation Format

Share Document