Uncoupled ω–ψ Formulation for Plane Flows in Multiply Connected Domains

1997 ◽  
Vol 07 (06) ◽  
pp. 731-767 ◽  
Author(s):  
J.-L. Guermond ◽  
L. Quartapelle
Keyword(s):  
Stream Function ◽  
Variational Formulation ◽  
Stokes Equations ◽  
Mixed Finite Element ◽  
Navier Stokes ◽  
Multiply Connected Domains ◽  
Navier Stokes Equations ◽  
Multiply Connected ◽  
Finite Element Implementation ◽  
Transient Problems

This work deals with the numerical solution of the unsteady Navier–Stokes equations in the vorticity and stream function representation for problems in multiply connected two-dimensional regions. A particular decomposition of the stream function space is proposed which leads to an uncoupled variational formulation of the equations linearized and discretized in time, thus extending to transient problems the celebrated method proposed by Glowinski and Pironneau for the biharmonic problem. Numerical results calculated by a mixed finite element implementation of the new uncoupled method are presented.

scholarly journals Numerical Simulation of Slip effect on Lid-Driven Cavity Flow Problem for High Reynolds Number: Vorticity – Stream Function Approach

2021 ◽  
Vol 8 (3) ◽  
pp. 418-424
Author(s):  
Syed Fazuruddin ◽  
Seelam Sreekanth ◽  
G. Sankara Sekhar Raju
Keyword(s):  
Reynolds Number ◽  
Stream Function ◽  
Stokes Equations ◽  
Cavity Flow ◽  
Partial Slip ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Driven Cavity ◽  
Slip Conditions ◽  
Driven Cavity Flow

Incompressible 2-D Navier-stokes equations for various values of Reynolds number with and without partial slip conditions are studied numerically. The Lid-Driven cavity (LDC) with uniform driven lid problem is employed with vorticity - Stream function (VSF) approach. The uniform mesh grid is used in finite difference approximation for solving the governing Navier-stokes equations and developed MATLAB code. The numerical method is validated with benchmark results. The present work is focused on the analysis of lid driven cavity flow of incompressible fluid with partial slip conditions (imposed on side walls of the cavity). The fluid flow patterns are studied with wide range of Reynolds number and slip parameters.

Aerodynamic and Aeroacoustic Analyses of a Regenerative Blower

2015 ◽  
Author(s):  
Man-Woong Heo ◽  
Tae-Wan Seo ◽  
Chung-Suk Lee ◽  
Kwang-Yong Kim
Keyword(s):  
Shear Stress ◽  
Variational Formulation ◽  
Stokes Equations ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Side Channel ◽  
Leakage Flow ◽  
Navier Stokes Equations ◽  
Unsteady Flow Analysis

This paper presents a parametric study to investigate the aerodynamic and aeroacoustic characteristics of a side channel regenerative blower. Flow analysis in the side channel blower was carried out by solving three-dimensional steady and unsteady Reynolds-averaged Navier-Stokes equations with the shear stress transport turbulence closure. Aeroacoustic analysis was conducted by solving the variational formulation of Lighthill’s analogy on the basis of the aerodynamic sources extracted from the unsteady flow analysis. The height and width of the blade and the angle between inlet and outlet ports were selected as three geometric parameters, and their effects on the aerodynamic and aeroacoustic performances of the blower have been investigated. The results showed that the aerodynamic and aeroacoustic performances were enhanced by decreasing height and width of blade. It was found that angle between inlet and outlet ports significantly influences the aerodynamic and aeroacoustic performances of the blower due to the stripper leakage flow.

Sign in / Sign up

Export Citation Format

Share Document