Refined Mathematical Models for Across-Wind Loads of Rectangular Tall Buildings with Aerodynamic Modifications

Author(s):  
Yi Li ◽  
Chao Li ◽  
Qiu-Sheng Li ◽  
Yong-Gui Li ◽  
Fu-Bin Chen

This paper aims to systematically study the across-wind loads of rectangular-shaped tall buildings with aerodynamic modifications and propose refined mathematic models accordingly. This study takes the CAARC (Commonwealth Advisory Aeronautical Research Council) standard tall building as a benchmark model and conducts a series of pressure measurements on the benchmark model and four CAARC models with different round corner rates (5%, 10%, 15% and 20%) in a boundary layer wind tunnel to investigate the across-wind dynamic loads of the typical tall building with different corner modifications. Based on the experimental results of the five models, base moment coefficients, power spectral densities and vertical correlation coefficients of the across-wind loads are compared and discussed. The analyzed results shown that the across-wind aerodynamic performance of the tall buildings can be effectively improved as the rounded corner rate increases. Taking the corner round rate and terrain category as two basic variables, empirical formulas for estimating the across-wind dynamic loads of CAARC standard tall buildings with various rounded corners are proposed on the basis of the wind tunnel testing results. The accuracy and applicability of the proposed formulas are verified by comparisons between the empirical formulas and the experimental results.

2013 ◽  
Vol 351-352 ◽  
pp. 347-350
Author(s):  
Lun Hai Zhi

This paper present some selected results of wind tunnel tests carried out on a typical super-tall building The variations of wind loads in the three orthogonal directions with wind attack direction were evaluated. The cross-correlations among various wind loading components were presented and discussed in detail. Furthermore, the across-wind spectral characteristics were studied and an empirical formula for estimation of the across-wind overturning moment spectrum for the super-tall building is presented. The output of this study is expected to be of considerable interest and practical use to professionals and researchers involved in the design of super-tall buildings.


2020 ◽  
Vol 23 (10) ◽  
pp. 2070-2085
Author(s):  
Yi Li ◽  
Ru-Biao Duan ◽  
Qiu-Sheng Li ◽  
Yong-Gui Li ◽  
Chao Li

Eight L-shaped rigid models with different geometric dimensions were tested at four typical terrain categories in a boundary wind tunnel to investigate the characteristics of wind pressures on L-shaped tall buildings. The effects including wind direction, turbulence intensity, and geometric dimension on the characteristics of wind pressures on L-shaped tall buildings were studied. Shape factors of each face under the unfavorable wind direction were summarized. Moreover, the power spectral densities, correlation coefficients, and coherence functions were analyzed in frequency domain. Based on the testing results, it is shown that the proposed exponential functions fit the measurements well. The objective of this study is to provide useful information for the wind-resistant design ofL-shaped tall buildings.


2012 ◽  
Vol 164 ◽  
pp. 433-436
Author(s):  
Tian Yin Xiao

9 models of tall buildings with different rectangular cross-sections are tested in a wind tunnel. After processing and analyzing the measured data of fluctuating pressure on the models, the effects of models’height, aspect ratio, side ratio on the power spectra of torsional wind loads are studied. New formulas of power spectral density of torsional wind loads are proposed by curve fitting method. The applicability of the formulas has been verified by the results from the wind tunnel test.


2013 ◽  
Vol 639-640 ◽  
pp. 515-522
Author(s):  
Yong Gui Li ◽  
Q.S. Li

Wind tunnel test of 1:500 rigid model of tall building with atrium was carried out. Based on the experimental results, characteristics of wind pressures on atrium facades and wind loads on the structure were investigated in detail. The results show that the formation of flow separation on the building top plays a critical role in the generation of wind pressures on the atrium facades. Meanwhile, wind pressure coefficient distributions on the atrium facades are found to be relatively uniform. Moreover, the horizontal and vertical correlations of pressure coefficient exhibit high at most locations on atrium facades. With the increasing of the opening ratio, the mean wind pressure coefficients first decreased and then stabilized, and the fluctuating wind pressure coefficients first decreased and then increased. A design guideline for the wind-resistant design of atrium facades was proposed, and the results predicted by the proposed guideline were in good agreement with those from the wind tunnel tests, indicating that the proposed guideline can be used in engineering applications. When the opening ratio is no more than 5.33%, the effect of the facade pressures within the atrium on the wind loads on the structure can be ignored. For such cases, the wind-resistant design for a tall building with atrium can refer to that of a similar shape tall building without atrium.


Author(s):  
Risto Kiviluoma ◽  
Atte Mikkonen

<p>This paper describes theoretical framework on forming equivalent static wind loads (ESWL) for large bridges. A method is proposed for efficient handling of large number of load cases, when vibration and structural analysis is extended to skew winds, i.e., to the wind directions other than the principal ones. These appear to be increasingly important in many practical cases when complex bridge geometry is used for architectural uniqueness; or when the bridge is situated in city centres or hilly terrain, where local obstacles make the wind turbulence difficult to assess with standard models.</p><p>The method uses a set of load cases for principal wind directions to be input and solved with the static Finite Element (FE) model. Combination matrix is deduced for the results to assess skew winds. The method is alike that is frequently used in wind-tunnel studies of tall buildings. ESWL determination is done in co-operation with the wind and the bridge engineer. The needed input for the wind engineer includes numeric vibration mode shape data, global nodal coordinates and mass distributions. ESWL are created in numeric form that could be easily input to the FE-model. The method allows utilisation of various type analysis results and experimental data available for the bridge, including section-model based analysis, full-model wind-tunnel tests and structural monitoring results. It facilitates examination and adjustment of appropriate safety marginal to wind loads that take into account methodologic uncertainties in each.</p><p>It is proposed that wind-tunnel laboratories, or other wind engineers with bridge analysis expertise, should more often include ESWL-extraction to their services.</p>


2016 ◽  
Vol 23 (3) ◽  
pp. 231-251
Author(s):  
Lianghao Zou ◽  
Guoji Xu ◽  
C.S. Cai ◽  
Shuguo Liang

2014 ◽  
Vol 580-583 ◽  
pp. 2567-2571
Author(s):  
Yi Sun ◽  
Nuan Deng ◽  
Zheng Liang Li

The responses of tall buildings under wind loads in hilly terrain are remarkably different from that in flat terrain. Wind load codes can’t work efficiently or directly to calculate the wind-induced vibration of tall buildings in hilly terrain. Utilizing some wind tunnel test results of wind field in hilly terrain and pressures on tall buildings, the access to response of tall buildings on hilly terrain were provided. Some effects from hill characteristics to building responses were discussed.


2019 ◽  
Vol 22 (11) ◽  
pp. 2464-2475 ◽  
Author(s):  
SS Cao ◽  
ST Ke ◽  
WM Zhang ◽  
L Zhao ◽  
YJ Ge ◽  
...  

The load–response correlation method has been recognized by the wind engineering community as a useful equivalent static wind load calculation method for structural design of quasi-static structures against strong winds. However, it has been found that the load–response correlation method is less effective to non-linear systems and in situations where load processes are non-Gaussian, such as large cooling towers subjected to strong winds. To validate the applicability of the load–response correlation method to large cooling towers, an aero-elastic model has been designed for a 215-m-high cooling tower in this article, which can simultaneously produce wind loads and wind-induced displacements of the structure according to wind tunnel model tests. Using data measured on the aero-elastic model, the exact results of correlation coefficients between wind loads and structural responses are obtained and validated by a non-linear finite element analysis. By comparing the correlation coefficients measured on the scaled model to the results based on the load–response correlation calculation, it is found that the correlations are much stronger for the load–response correlation calculation than those for the exact wind tunnel measurement. The explanation for this observation is that the non-linearity of the real structure and the non-Gaussian feature of the actual wind loads can weaken the correlations between the wind loads and the structural responses.


Sign in / Sign up

Export Citation Format

Share Document