ADAPTIVE SUPER-TWISTING-LIKE SLIDING MODE CONTROL WITH PRESCRIBED PERFORMANCE FOR ROBOT MANIPULATORS

2019 ◽  
Vol 19 (08) ◽  
pp. 1940053
Author(s):  
SHUPENG ZHENG ◽  
XINJIAN NIU ◽  
CHENHUI PENG

In order to minimize the involuntary tremor of surgeon’s hands, the surgical robots are widely applied in the minimally invasive surgeries. However, unlike ordinary robots, the surgical robots require that the manipulator has high precision and strong anti-disturbance ability. Besides that, the manipulators of surgical robots must be able to move smoothly and respond quickly to the surgeon’s instructions during conducting tasks. To solve aforementioned problems, this paper describes a super-twisting sliding mode controller for the robot manipulator. The basic law is combined with the adaptive term to overcome the unknown disturbances and structural uncertainties, and with the prescribed performance allowing to influence the error dynamics. To ensure the robot system has good transient and steady-state performances, the transformation function of tracking errors is devised. Through using transformed errors, we attain the surface of sliding mode and propose a modified structure of traditional super-twisting algorithm. Considering the derivative of lumped disturbance has unknown boundary, a novel adaptive law is derived for the modified super-twisting sliding mode control which does not require the boundary of disturbance. Simulation experiments showed that the proposed control algorithm not only improves the tracking performance of surgical robot manipulators, but also facilitates the parameter tuning of controller. The devised robot manipulators are also potentially applicable to telesurgery where the steady-state response of surgical robots is required.

Author(s):  
Mohd S. Qureshi ◽  
Pankaj Swarnkar ◽  
Sushma Gupta

Background: Continually in view of the fact that digital technology entered in the Operating Theatre (OT), surgery has moved out through one of the big revolutions in medical field. Robotic-Assisted Surgery (RAS) is a way of technological development in the medical environment, designed to thrash the limitations of Minimal Invasive Surgery (MIS). Surgical robots carry out operation with the motion control of manipulator joints on the patient. Precise and fine control of these robots is very imperative. Methods: The paper depicts the control methodology for surgical robots based on the combination of Sliding Mode Control (SMC) with Fuzzy Logic Control (FLC). The destructive chattering phenomenon in SMC is circumvented by espousing FLC in SMC. System stability is investigated using Lyapunov theorem. All numerical simulations have been carried out using MATLAB tool for 2 DOF robot manipulator formulated for trajectory tracking process which shows the efficacy of the proposed methodology. Results: The simulation results of FSMC are compared with the conventional SMC which represents the improvement of control law for the attainment of optimized results. Conclusion: The proposed methodology in the paper is very much suitable in controlling surgical robot during typical surgical operations. The effectiveness of proposed control methodology is shown using simulation studies in the paper.


Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2544 ◽  
Author(s):  
En-Chih Chang

In this paper, an intelligent sliding mode controlled voltage source inverter (VSI) is developed to achieve not only quick transient behavior, but satisfactory steady-state response. The presented approach combines the respective merits of a nonsingular fast terminal attractor (NFTA) as well as an adaptive neuro-fuzzy inference system (ANFIS). The NFTA allows no singularity and error states to be converged to the equilibrium within a finite time, while conventional sliding mode control (SMC) leads to long-term (infinite) convergent behavior. However, there is the likelihood of chattering or steady-state error occurring in NFTA due to the overestimation or underestimation of system uncertainty bound. The ANFIS with accurate estimation and the ease of implementation is employed in NFTA for suppressing the chatter or steady-state error so as to improve the system’s robustness against uncertain disturbances. Simulation results display that this described approach yields low distorted output wave shapes and quick transience in the presence of capacitor input rectifier loading as well as abrupt connection of linear loads. Experimental results conducted on a 1 kW VSI prototype with control algorithm implementation in Texas Instruments DSP (digital signal processor) support the theoretic analysis and reaffirm the robust performance of the developed VSI. Because the proposed VSI yields remarkable benefits over conventional terminal attractor VSIs on the basis of computational quickness and unsophisticated realization, the presented approach is a noteworthy referral to the designers of correlated VSI applications in future, such as DC (direct current) microgrids and AC (alternating current) microgrids, or even hybrid AC/DC microgrids.


2008 ◽  
Vol 13 (1) ◽  
pp. 124-128 ◽  
Author(s):  
Ha Quang Thinh Ngo ◽  
Jin-Ho Shin ◽  
Won-Ho Kim

Mechatronics ◽  
2022 ◽  
Vol 82 ◽  
pp. 102717
Author(s):  
Yongchao Wang ◽  
Zengjie Zhang ◽  
Cong Li ◽  
Martin Buss

Sign in / Sign up

Export Citation Format

Share Document