Preparation of Nitrogen-Deficient Graphitic Carbon Nitride with a Large Specific Surface Area by Melt Pretreatment and Its Photocatalytic Performance

NANO ◽  
2020 ◽  
Vol 15 (06) ◽  
pp. 2050079
Author(s):  
Xuelei Li ◽  
Jinfeng Bai ◽  
Jiaqi Li ◽  
Chao Li ◽  
Junru Zhang ◽  
...  
Keyword(s):  
Visible Light ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Carbon Nitride ◽  
Mesoporous Structure ◽  
Graphitic Carbon ◽  
Graphitic Carbon Nitride ◽  
Large Specific Surface Area ◽  
X Ray

In this study, nitrogen-deficient graphitic carbon nitride (M-LS-g-C3N4) with a mesoporous structure and a large specific surface area was obtained by calcination after melt pretreatment using urea as a precursor. X-ray diffraction (XRD), transmission electron microscopy (TEM), N2 adsorption, X-ray photoelectron spectroscopy (XPS), UV-Vis, ESR and photoluminescence (PL) were used to characterize the structure, morphology and optical performance of the samples. The TEM results showed the formation of a mesoporous structure on the 0.1[Formula: see text]M-LS-g-C3N4 surface. The porous structure led to an increase in the specific surface area from 41.5[Formula: see text]m2/g to 124.3[Formula: see text]m2/g. The UV-Vis results showed that nitrogen vacancies generated during the modification process reduced the band gap of g-C3N4 and improved the visible light absorption. The PL spectra showed that the nitrogen defects promoted the separation of photogenerated electron–hole pairs. In the visible light degradation of methyl orange (MO), the reaction rate constant of 0.1[Formula: see text]M-LS-g-C3N4 reached 0.0086[Formula: see text][Formula: see text], which was 5.05 times that of pure g-C3N4. Superoxide radicals and photogenerated holes were found to be the main active species in the reaction system. This study provides an efficient, green and convenient means of preparing graphitic carbon nitride with a large specific surface area.

scholarly journals Synthesis of oxygen-doped graphitic carbon nitride and its application for the degradation of organic pollutants via dark Fenton-like reactions

RSC Advances ◽  
2020 ◽  
Vol 10 (54) ◽  
pp. 32906-32918 ◽  
Author(s):  
Tian-Jiao Jiang ◽  
Cai-Wu Luo ◽  
Chao Xie ◽  
Yue-Hua Wei ◽  
An Li
Keyword(s):  
Specific Surface ◽  
Environmental Protection ◽  
Surface Area ◽  
Organic Pollutants ◽  
Specific Surface Area ◽  
Active Sites ◽  
Carbon Nitride ◽  
Graphitic Carbon ◽  
Graphitic Carbon Nitride

Graphitic carbon nitride (g-C3N4) is a promising photocatalyst for environmental protection but its development is greatly limited for its application in dark Fenton-like reactions due to its extremely low specific surface area and lack of suitable active sites.

Enhanced photocatalytic activity of a hollow TiO2–Au–TiO2 sandwich structured nanocomposite

RSC Advances ◽  
2016 ◽  
Vol 6 (23) ◽  
pp. 18958-18964 ◽  
Author(s):  
Qianqian Ding ◽  
Yunxia Zhang ◽  
Guozhong Wang ◽  
Hongjian Zhou ◽  
Haimin Zhang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Large Specific Surface Area

The hollow mesoporous TiO2–Au–TiO2 nanospheres with stability, large specific surface area can enhance visible-light-induced photocatalytic activity.

scholarly journals Development of a novel photocatalyst for the photocatalytic treatment of industrial wastewater

2021 ◽  
Author(s):  
Mohsen Nasirian
Keyword(s):  
Photocatalytic Activity ◽  
Transition Metal ◽  
Visible Light ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Mass Ratio ◽  
Thermal Synthesis ◽  
Composite Photocatalyst ◽  
X Ray

Heterogeneous semiconductor photocatalysts have been shown to be efficient for the degradation of refractory organics into simple compounds. Among all photocatalysts, TiO2 is the most used one. Two issues that arise with the use of unmodified TiO2 as a photocatalyst are the unwanted fast recombination of electron/hole pairs and the lower effectiveness in the presence of visible light irradiation. Doping a transition metal or a non-metal into TiO2 and its combination with another photocatalyst have been used to enhance its photoactivity. This study is to develop a new photocatalyst by the combination of TiO2 with another semiconductor oxide (Fe2O3) and its doping with transition metal such as Ag. Combined photocatalysts of Fe2O3 /TiO2 (with different mass ratio of Fe:TiO2) is synthesized and then silver ion is doped to combine photocatalysts (with different mass ratio of Ag:TiO2) to produce a new composite photocatalyst of Ag/TiO2/Fe2O3. A new method of UV-assisted thermal synthesis is also employed to prepare the new composite photocatalyst. Methyl orange (MO) and Congo red (CR), as model pollutants, are used to test the developed photocatalyst. In addition, nitrogen-doped titanium dioxide photocatalyst (N-TiO2) with heterojunction structures is synthesized by three different approaches including new UV-assisted thermal synthesis, annealing, and microwave techniques. The novel UV-assisted thermal synthesis has produced encouraging results as a preparation method to prepare N-TiO2 at lower temperature and atmospheric pressure as well as a lower cost. Design of Experiment (DOE) along with response surface methodology (RSM) is used to optimize the photocatalytic activity of N-TiO2 as well as the affecting parameters (wavelength, light intensity, pH, and initial TOC) for decomposition of organics. The structure of all synthesized composite photocatalysts are investigated by X-ray diffraction (XRD). Scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectroscopy (EDS) is employed to evaluate surface characteristics and elemental analysis of synthesized photocatalysts. Specific surface area of photocatalysts is measured based on Brunauer, Emmett and Teller (BET) technique. Results show that bare TiO2 has the lowest photocatalytic activity in degradation of organics. When silver is doped to TiO2, the degradation of MO is slightly enhanced at specific mass ratio. The presence of Fe2O3 in the new composite causes a red shift and enhances the potential to absorb higher range of visible light. Results from XRD confirmed that Fe3+ substitutes with Ti4+ in the crystal lattice of TiO2 and crystal defect occurs. The degradation of MO in presence of Ag/TiO2/Fe2O3 (Ag/TiO2=0.005 w:w and Fe:TiO2= 0.01 w:w) reached to 95.6% under sunlight in three hours with a red shift towards visible light. It is observed that there is an optimum specific surface area of photocatalysts by doping and combining photocatalysts.

Facile Synthesis of Fluorine Doped Graphitic Carbon Nitride with Enhanced Visible Light Photocatalytic Activity

NANO ◽  
2016 ◽  
Vol 11 (12) ◽  
pp. 1650137 ◽  
Author(s):  
Mengqiu Xu ◽  
Bo Chai ◽  
Juntao Yan ◽  
Haibo Wang ◽  
Zhandong Ren ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Carbon Nitride ◽  
Separation Efficiency ◽  
Nitrogen Adsorption ◽  
Active Species ◽  
Graphitic Carbon ◽  
Graphitic Carbon Nitride ◽  
X Ray

Fluorine doped graphitic carbon nitride (g-C3N4) was successfully synthesized by a convenient co-polycondensation of urea and ammonium fluoride (NH4F) mixtures, and characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectra (FTIR), UV-Vis diffuse reflectance absorption spectra (UV-DRS), nitrogen adsorption–desorption, photoelectrochemical measurement and photoluminescence (PL) spectra. The photocatalytic activities of fluorine doped g-C3N4 samples were evaluated by the degradation of Rhodamine B (RhB) solution under visible light irradiation. The results showed that the fluorine doped g-C3N4 had a better photocatalytic activity than that of undoped g-C3N4, which was attributed to the favorable textural, optical and electronic properties derived from the fluorine atoms substituting nitrogen atoms of g-C3N4 frameworks. The photoelectrochemical measurements confirmed that the charges separation efficiency was improved by fluorine doping g-C3N4. Moreover, the tests of radical scavengers demonstrated that the holes (h[Formula: see text]) and superoxide radicals ([Formula: see text]O[Formula: see text]) were the main active species for the degradation of RhB.

Sign in / Sign up

Export Citation Format

Share Document