AbstractThe Lennox Field, located in blocks 110/15 and 110/14, was the second oil field to be developed in the East Irish Sea Basin. It contains 184 MMBBL of oil in-place within a 143 ft thick oil rim overlain by a large gas cap up to 750 ft thick. The GIIP is estimated to be 497 BCF. The field came on stream in February 1996, and it is now being developed with seven horizontal oil producers, including two multi-lateral wells and two crestal gas injectors. Production from the field can be divided into two distinct phases; the oil rim development phase, and the gas cap blow-down phase. The latter phase is currently anticipated to commence in 2004. The field structure consists of a roll-over anticline formed in the hanging wall of the Formby Point Fault during extensional faulting in Triassic-early Jurassic times, and later readjusted by contractional movements during Tertiary inversion. The oil and gas are trapped in the highly productive Triassic Ormskirk Sandstone Formation. The reservoir comprise high porosity aeolian and fluvial sandstones occurring at a shallow depth (c. 2500 ft) with a maximum gas column of 750 ft above an oil rim of 143 ft. The reservoir quality is principally controlled by primary depositional processes as no significant adverse diagenetic effects are observed. The hydrocarbon filling history was complex, with at least three phases of oil and gas generation. The field contains a light, saturated oil (45° API) with a GOR of 650 SCF/BBL. The crude contains high levels of H2S (0.1 mol%) and mercaptans (450 ppm), which are removed during processing at the Douglas complex. Water cut from the field is currently around 2-5%, and no free gas production has been observed to date. Gas production from Lennox is anticipated to start in 2004.
