scholarly journals Energy--Performance Trade-Offs via the EP Queue

Author(s):  
Peter G. Harrison ◽  
Naresh M. Patel ◽  
William J. Knottenbelt
Buildings ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 105 ◽  
Author(s):  
Nadia MIRABELLA ◽  
Martin RÖCK ◽  
Marcella Ruschi Mendes SAADE ◽  
Carolin SPIRINCKX ◽  
Marc BOSMANS ◽  
...  

Globally, the building sector is responsible for more than 40% of energy use and it contributes approximately 30% of the global Greenhouse Gas (GHG) emissions. This high contribution stimulates research and policies to reduce the operational energy use and related GHG emissions of buildings. However, the environmental impacts of buildings can extend wide beyond the operational phase, and the portion of impacts related to the embodied energy of the building becomes relatively more important in low energy buildings. Therefore, the goal of the research is gaining insights into the environmental impacts of various building strategies for energy efficiency requirements compared to the life cycle environmental impacts of the whole building. The goal is to detect and investigate existing trade-offs in current approaches and solutions proposed by the research community. A literature review is driven by six fundamental and specific research questions (RQs), and performed based on two main tasks: (i) selection of literature studies, and (ii) critical analysis of the selected studies in line with the RQs. A final sample of 59 papers and 178 case studies has been collected, and key criteria are systematically analysed in a matrix. The study reveals that the high heterogeneity of the case studies makes it difficult to compare these in a straightforward way, but it allows to provide an overview of current methodological challenges and research gaps. Furthermore, the most complete studies provide valuable insights in the environmental benefits of the identified energy performance strategies over the building life cycle, but also shows the risk of burden shifting if only operational energy use is focused on, or when a limited number of environmental impact categories are assessed.


Author(s):  
Mari Aino Hukkalainen ◽  
Krzysztof Klobut ◽  
Tarja Mäkeläinen ◽  
Vanda Dimitriou ◽  
Dariusz Leszczyński

Practical guidelines are presented for improved process for design and retrofitting of energy-efficient buildings, with an aim to integrate buildings better with the neighbourhood energy system, among others through energy matching. The chapter describes the role of energy simulations in an integrated building retrofitting process and how to select technologies for the retrofitting toward nearly zero energy building level. Feasibility of performing a holistic analysis of retrofitting options can be increased through the integration of BIM, well populated, and linked databases and a multi-criteria decision-making approach. Multiple-criteria decision-making methods aid taking into account a number of building energy performance and user-preference-related criteria and the trade-offs between the different criteria for each retrofitting option. The real-life viewpoints and benefits of utilising the developed methods and processes are discussed, especially from the Eastern European view.


Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2245 ◽  
Author(s):  
Annika K. Jägerbrand

The aim of this review was to map synergies and trade-offs between sustainable development and energy efficiency and savings regarding exterior lighting. Exterior lighting, such as public road and street lighting, requires significant amounts of energy and hinders sustainable development through its increasing of light pollution, ecological impact, and global climate change. Interlinkages between indicators in sustainability and energy that have positive interactions will lead to a mutual reinforcement in the decision-making process, and vice versa, interlinkages between trade-offs may lead to unwanted and conflicting effects. Very few studies have presented a clear vision of how exterior lighting should be contributing to, and not counteracting, the sustainable development of our planet. This study was conducted through a theoretical and systematic analysis that examined the interactions between sustainable development and energy performance based on a framework using indicators and variables, and by reviewing the current literature. Additionally, 17 indicators of energy efficiency and energy savings were identified and used in the analysis. Most interactions between variables for sustainable development and energy performance (52%) were found to be synergistic. The synergistic interactions were mostly found (71%) in the ecological and environmental dimension showing that environmental and ecological sustainability goes hand in hand with energy efficiency and savings. Trade-offs were found only in the economic and social dimensions accounting for 18% of the interactions identified. This review shows that the interactions between sustainable development and energy performance can be used to establish more efficient policies for decision-making processes regarding exterior lighting.


Energies ◽  
2018 ◽  
Vol 11 (7) ◽  
pp. 1863 ◽  
Author(s):  
Rui Oliveira ◽  
António Figueiredo ◽  
Romeu Vicente ◽  
Ricardo Almeida

This paper discusses the thermal and energy performance of a detached lightweight building. The building was monitored with hygrothermal sensors to collect data for building energy model calibration. The calibration was performed using a dynamic simulation through EnergyPlus® (EP) (Version 8.5, United States Department of Energy (DOE), Washington, DC, USA) with a hybrid evolutionary algorithm to minimise the root mean square error of the differences between the predicted and real recorded data. The results attained reveal a good agreement between predicted and real data with a goodness of fit below the limits imposed by the guidelines. Then, the evolutionary algorithm was used to meet the compliance criteria defined by the Passive House standard for different regions in Portugal’s mainland using different approaches in the overheating evaluation. The multi-objective optimisation was developed to study the interaction between annual heating demand and overheating rate objectives to assess their trade-offs, tracing the Pareto front solution for different climate regions throughout the whole of Portugal. However, the overheating issue is present, and numerous best solutions from multi-objective optimisation were determined, hindering the selection of a single best option. Hence, the life cycle cost of the Pareto solutions was determined, using the life cycle cost as the final criterion to single out the optimal solution or a combination of parameters.


2020 ◽  
Vol 105 ◽  
pp. 789-799 ◽  
Author(s):  
Xiaolong Xu ◽  
Xuyun Zhang ◽  
Maqbool Khan ◽  
Wanchun Dou ◽  
Shengjun Xue ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document