Plasmonic Platinum-Titania Photocatalyst Nanocomposite for Solar Application and Protective Titania Modified Nanocomposite Resin Coatings Against Steel Corrosion

2020 ◽  
Vol MA2020-02 (8) ◽  
pp. 1168-1168
Author(s):  
Ubong Eduok
Author(s):  
Ya.G. Avdeev ◽  
◽  
Yu.B. Makarychev ◽  
D.S. Kuznetsov ◽  
L.P. Kazanskii ◽  
...  

2019 ◽  
Author(s):  
Chem Int

The anti-corrosive properties of sulphadoxine + pyrimethamine (S+P) on the corrosion of pipeline steel in acidic environment were investigated using electrochemical techniques. The results obtained showed an excellent inhibition efficiency which increased with increase in inhibitor concentration. The corrosion inhibition efficiency increased up to 99.04 % at 0.01M S+P and decreased with rise in temperature down to 85.93 % at 333 K and 0.01 M S+P, suggesting a physiosorptive mechanism of adsorption. Also the adsorption data was fitted into Langmuir and Temkin adsorption isotherms, while the inhibitive action was shown to proceed by mixed inhibition mode.


2018 ◽  
Vol 56 (12) ◽  
pp. 989-994
Author(s):  
T. Nishida ◽  
N. Otsuki ◽  
H. Hamada
Keyword(s):  

2020 ◽  
Vol 255 ◽  
pp. 119422 ◽  
Author(s):  
Hao Tang ◽  
Jueshi Qian ◽  
Ziwei Ji ◽  
Xiaobing Dai ◽  
Zhen Li

2019 ◽  
Vol 293 ◽  
pp. 111478 ◽  
Author(s):  
Weiwei Zhang ◽  
Hui-Jing Li ◽  
Meirong Wang ◽  
Li-Juan Wang ◽  
Qianwen Pan ◽  
...  

Catalysts ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 542 ◽  
Author(s):  
Kenta Kobayashi ◽  
Mai Takashima ◽  
Mai Takase ◽  
Bunsho Ohtani

Facet-selective gold or platinum-nanoparticle deposition on decahedral-shaped anatase titania particles (DAPs) exposing {001} and {101} facets via photodeposition (PD) from metal-complex sources was reexamined using DAPs prepared with gas-phase reaction of titanium (IV) chloride and oxygen by quantitatively evaluating the area deposition density on {001} and {101} and comparing with the results of deposition from colloidal metal particles in the dark (CDD) or under photoirradiation (CDL). The observed facet selectivity, more or less {101} preferable, depended mainly on pH of the reaction suspensions and was almost non-selective at low pH regardless of the deposition method, PD or CDL, and the metal-source materials. Based on the results, the present authors propose that facet selectivity is attributable to surface charges (zeta potential) depending on the kind of facets, {001} and {101}, and pH of the reaction mixture and that this concept can explain the observed facet selectivity and possibly the reported facet selectivity without taking into account facet-selective reaction of photoexcited electrons and positive holes on {101} and {001} facets, respectively.


2012 ◽  
Vol 12 (6) ◽  
pp. 2113-2120 ◽  
Author(s):  
Yunze He ◽  
Guiyun Tian ◽  
Hong Zhang ◽  
Mohammed Alamin ◽  
Anthony Simm ◽  
...  

2021 ◽  
Vol 13 (6) ◽  
pp. 3444
Author(s):  
Zheng Li ◽  
Hao Jin ◽  
Shuo Yu

Segment reinforcement corrosion can cause bearing-capacity degradation of shield tunnel, which is unsafe for the metro operation. Therefore, a three-dimensional computational model was proposed in this paper to study the corrosion rate and rust expansion form of segment reinforcement by the combined action of soil loading, chloride ion and stray current. The results show that the arch waist segment steel corrosion rate in the middle is larger than the ends. The rust expansion form of segment reinforcement appears be an eccentric circle. The radius size and circular center are related to the non-uniform corrosion coefficient and the maximum corrosion current density.


Sign in / Sign up

Export Citation Format

Share Document