Inhibition of pipeline steel corrosion in acidic environment using sulphadoxine and pyrimethamine

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Inhibition Efficiency ◽  
Pipeline Steel ◽  
Electrochemical Techniques ◽  
Steel Corrosion ◽  
Acidic Environment ◽  
Inhibitor Concentration ◽  
Adsorption Data ◽  
Corrosion Inhibition Efficiency ◽  
Inhibitive Action ◽  
Sulphadoxine Pyrimethamine

The anti-corrosive properties of sulphadoxine + pyrimethamine (S+P) on the corrosion of pipeline steel in acidic environment were investigated using electrochemical techniques. The results obtained showed an excellent inhibition efficiency which increased with increase in inhibitor concentration. The corrosion inhibition efficiency increased up to 99.04 % at 0.01M S+P and decreased with rise in temperature down to 85.93 % at 333 K and 0.01 M S+P, suggesting a physiosorptive mechanism of adsorption. Also the adsorption data was fitted into Langmuir and Temkin adsorption isotherms, while the inhibitive action was shown to proceed by mixed inhibition mode.

scholarly journals Corrosion Inhibition Behaviour of Enantia chlorantha Extract on Pipeline Steel Corrosion in Acidic System

2020 ◽  
Vol 24 (4) ◽  
pp. 707-712
Author(s):  
N.C. Ngobiri ◽  
C. Obi
Keyword(s):  
Weight Loss ◽  
Corrosion Rate ◽  
Corrosion Inhibition ◽  
Half Life ◽  
Surface Coverage ◽  
Inhibition Efficiency ◽  
Pipeline Steel ◽  
Gravimetric Method ◽  
Acidic Environment ◽  
Corrosion Inhibition Efficiency

The corrosion inhibition capacity of Enantia chlorantha bark (ECB) extract on the corrosion of pipeline steel in an acidic environment was studied using the gravimetric method. The result revealed that weight loss obviously increased with the rise in temperature though trend lines were not parallel. The results obtained from the evaluation showed that the corrosion inhibition efficiency of the extract increased with extract concentrationattaining an efficiency of 89.02% with 2.5 g/L concentration at 30 ºC. The corrosion inhibition efficiency, however, decreased with increase in temperature, while the corrosion rate decreased. The significant achievement in this study was the ability of Enantia chlorantha extract to reduce the corrosion rate constant, increase its surface coverage with consequent longer material half-life in an acidic environment. Keywords: Inhibition efficiency, surface coverage, plant extract, weight loss, half-life

Vegetable Extracts as Inhibitors of Carbon Steel Corrosion in Acidic Environment

2016 ◽  
Vol 1139 ◽  
pp. 46-51
Author(s):  
Lidia Benea ◽  
Eliza Dănăilă ◽  
Valentin Marian Dumitraşcu
Keyword(s):  
Carbon Steel ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Steel Corrosion ◽  
Electrolytic Cell ◽  
Open Circuit ◽  
Acidic Environment ◽  
Green Inhibitor ◽  
Wide Range

Vegetable extracts have become important as an environmentally acceptable, readily available and renewable source for wide range of inhibitors. They are the rich sources of ingredients which have very high inhibition efficiency. The aim of the present work is to study the corrosion inhibition characteristics of aqueous extract of USINHIB (the abbreviation attributed to garlic extract, derived from romanian language, which was used as vegetable inhibitor), which have been studied as an eco-friendly green inhibitor for corrosion control of carbon steel in 0.5 M hydrochloric acid. The inhibitive effect of naturally available vegetable extract USINHIB toward the corrosion of carbon steel in 0.5 M HCl solution has been investigated by electrochemical techniques. Open circuit potential, potentiodynamic polarization, electrochemical impedance spectroscopy and cyclic voltammetry in presence and absence of vegetable inhibitor were used to provide detailed information about the corrosion of steel surface which occurs in acidic environment. The three electrode electrolytic cell was used. The obtained results showed the increase in the inhibition efficiency.

Phenylcoumarin Glucoside as a Natural Inhibitor in the Protection of Low Carbon Steel Against Corrosion

MRS Advances ◽  
2017 ◽  
Vol 2 (62) ◽  
pp. 3909-3915
Author(s):  
Héctor M. Barbosa Cásarez ◽  
Araceli Espinoza Vázquez ◽  
Francisco J. Rodríguez-Gomez
Keyword(s):  
Carbon Steel ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Low Carbon Steel ◽  
Steel Corrosion ◽  
Low Carbon ◽  
Low Concentrations ◽  
Natural Inhibitor ◽  
Polarization Studies

AbstractPhenylcoumarin glucoside (4-PC) is a compound extracted from the plant Hintona latiflora and was studied as inhibitor for AISI 1018 steel corrosion in 3% NaCl solution using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques, which may find application as eco-friendly corrosion inhibitors. The 4-PC provides inhibitor properties that protect AISI 1018 low carbon steel against corrosion at low concentrations (5 ppm) obtained by EIS. Polarization studies showed that the inhibitor was of mixed type. The inhibition efficiency by the two electrochemical techniques shows similar results. The inhibitor adsorption was demonstrated to be a combined process (physisorption and chemisorption) according to the Langmuir isotherm.

scholarly journals Benzylidene as Efficient Corrosion Inhibition of Mild Steel in Acidic Solution

Proceedings ◽  
2019 ◽  
Vol 41 (1) ◽  
pp. 27
Author(s):  
Shaimaa B. Al-Bghdadi ◽  
Mahdi M. Hanoon ◽  
Jafer F. Odah ◽  
Lina M. Shaker ◽  
Ahmed A. Al-Amiery
Keyword(s):  
Mild Steel ◽  
Inhibition Efficiency ◽  
Gravimetric Method ◽  
Steel Corrosion ◽  
Solution Temperature ◽  
Acidic Environment ◽  
Mild Steel Corrosion ◽  
Electron Microscopy Analysis ◽  
Microscopy Analysis ◽  
Steel Coupon

A New benzylidene derivative namely benzylidene-5-phenyl-1,3,4-thiadiazol-2-amine (BPTA), was successfully synthesized and characterized using Fourier Transform Infrared Spectroscopy, Nuclear Magnetic Resonance and elemental analysis (CHN) techniques. The inhibition efficiency of BPTA on mild steel corrosion in 1.0 N HCl was tested at various temperatures. The methodological work was achieved by gravimetric method complemented with morphological investigation. The concentrations of inhibitor were 0.1, 0.2, 0.3, 0.4 and 0.5 mM at the temperatures 303, 313, 323 and 333 K. The BPTA, molecules as become superior corrosion inhibitor with 92% inhibition efficiency of mild steel coupon in the acidic environment. The inhibition efficiency increased with increasing concentrations of BPTA and the excellent efficiency was performed with the 0.5 mM concentration and followed with 0.4 mM. In acidic environment, the 0.5 and 0.4 mM gave the optimum performance with weight loss technique and scanning electron microscopy analysis. On the other hand, the inhibition efficiency decreased with the increase of temperature. Results of BPTA indicated mixed type inhibitor and the adsorption on the mild steels surface obeys the Langmuir adsorption isotherm. It was found that the BPTA performance depend on the concentration and the solution temperature. Quantum chemical calculations have been done to correlate the electronic characteristics of BPTA with the corrosive inhibitive impact. Experimental and theoretical results are in good agreement.

scholarly journals Inhibition of Pipeline Steel Corrosion in 0.5 M H2SO4 Using Cotyledon of Chrysophyllum Albidum

2020 ◽  
Vol 24 (4) ◽  
pp. 691-697
Author(s):  
E.P. Othaki ◽  
N.C. Ngobiri
Keyword(s):  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Adsorption Process ◽  
Pipeline Steel ◽  
Steel Corrosion ◽  
Langmuir Adsorption ◽  
Extract Concentration ◽  
Ir Studies ◽  
Ft Ir ◽  
As Adsorption

The corrosion inhibition characteristics of Chrysophyllum albidum cotyledon extract was studied as a green and sustainable corrosion inhibitors for pipeline steel in acidic environment attemperatures, 303,313 and 323K using gravimetric technique.The results obtained showed that the inhibition efficiency increased with increase in extract concentration but decrease with increase in temperature. The extract attained an inhibition efficiency of 94 % with 5 g/L at 303 K and 52.2 % with 1 g/L at 333K. Also increase in concentration of the extract lead to increase in activation energydepicting an exothermic process.Fourier transform infrared spectroscopy (FT-IR) studies showed the mode of inhibition as adsorption of phytochemicals from the extract on pipeline steel surface. Langmuir adsorption isotherm best fitted into the adsorption process which is spontaneous and physical. Keywords: Chrysophyllum albidum, Pipeline steel, Inhibition, Adsorption.

scholarly journals New Aromatic Azo-Schiff as Carbon Steel Corrosion Inhibitor in 1 M H2SO4

2018 ◽  
Vol 34 (5) ◽  
pp. 2471-2476 ◽  
Author(s):  
Hamida Edan Salman ◽  
Asim A. Balakit ◽  
Ali Ahmed Abdulridha
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Corrosion Inhibition ◽  
Potentiodynamic Polarization ◽  
Inhibition Efficiency ◽  
Steel Corrosion ◽  
Spectroscopic Techniques ◽  
Different Temperatures ◽  
Corrosion Inhibition Efficiency

A new aromatic Schiff base with azo linkage (AS) has been synthesized and characterized by FT-IR, 1H NMR and 13C NMR spectroscopic techniques. The new compound (AS) has been evaluated as carbon steel corrosion inhibitor at different concentrations (0.005, 0.01, 0.02, 0.04 and 0.08 mM) and different temperatures (303 – 333 K). The corrosion inhibition efficiency was studied by potentiodynamic polarization and weight loss measurements. The effects of concentration and temperature on the inhibition efficiency were studied by potentiodynamic polarization studies, the results showed that increasing concentration of AS increases the inhibition efficiency while increasing the temperature decreases it, the highest corrosion inhibition efficiency, 93.9% was recorded with 0.08 mM of AS at 313 K in 1 M H2SO4. Weight loss measurements showed that the inhibition efficiency reached 97.1% in the presence of AS (0.08 mM) at 313 K. The adsorption process was found to obey Langmuir isotherm, and the adsorption thermodynamic parameters were studied. Scanning electron microscope (SEM) was used to confirm the results.

scholarly journals Performance of Methyl-5-Benzoyl-2-Benzimidazole Carbamate (Mebendazole) as Corrosion Inhibitor for Mild Steel in Dilute Sulphuric Acid

2020 ◽  
Vol 2020 ◽  
pp. 1-11 ◽  
Author(s):  
F. O. Edoziuno ◽  
A. A. Adediran ◽  
B. U. Odoni ◽  
M. Oki ◽  
P. P. Ikubanni ◽  
...  
Keyword(s):  
Mild Steel ◽  
Inhibition Efficiency ◽  
Elevated Temperatures ◽  
Physical Adsorption ◽  
Electrochemical Techniques ◽  
Low Carbon Steel ◽  
Gravimetric Analysis ◽  
Low Carbon ◽  
Maximum Inhibition ◽  
Inhibitive Action

The inhibitive effect of mebendazole (MBZ) on the corrosion of low-carbon steel in H2SO4 was investigated by gravimetric and electrochemical techniques as well as examination of specimens in the scanning electron microscope with attached energy dispersive X-ray spectrometer (EDS). From gravimetric analysis, the highest inhibition efficiency of about 96.6% was obtained for 1.0 g of inhibitor in H2SO4 solution at 24 h, while with longer exposure times of between 72 to 120 h, the efficiencies averaged between 92 and 95%. Tafel extrapolations from the polarization curves showed that 1.0 g MBZ gave a maximum inhibition efficiency of approximately 99% for the investigation conducted at 30°C, whereas 1.5 g of MBZ gave a maximum inhibition efficiency of about 85% at 60°C. Inhibition efficiency increased with increasing concentrations of MBZ and decreased at elevated temperatures. The inhibitive action was attributed to physical adsorption of MBZ species on the mild steel surface which followed the Langmuir adsorption isotherm. MBZ performed as a mixed-type inhibitor on mild steel in dilute H2SO4.

Inhibition Action of Complex of Triethanolamine (TEA) and Na2WO4 for Brass in Simulated Cooling Water

2011 ◽  
Vol 347-353 ◽  
pp. 542-546
Author(s):  
Qun Jie Xu ◽  
Xian Qin Deng ◽  
Wen Li
Keyword(s):  
Synergistic Effect ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Cooling Water ◽  
Ac Impedance ◽  
Inhibitor Concentration ◽  
Optimum Ratio ◽  
Inhibition Effect ◽  
Corrosion Inhibition Efficiency ◽  
Dc Polarization

The corrosion inhibition of brass in simulated cooling water by complex of triethanolamine (TEA) and Na2WO4 had been investigated by means of electrochemical (AC impedance and dc polarization) techniques. The results indicated that both TEA and Na2WO4 were able to inhibit the corrosion of brass in simulated cooling water. TEA showed the best inhibition effect for brass corrosion at the TEA concentration of 30 mg/L, and the inhibition efficiency was 45.35%. At the total inhibitor concentration of 20 mg/L, the complex of TEA and Na2WO4 had a good synergistic effect, and the optimum ratio of TEA to Na2WO4 is 1:9, corrosion inhibition efficiency was 89.08%.

scholarly journals Eco-Friendly Corrosion Inhibition of Pipeline Steel UsingBrassica oleracea

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
N. C. Ngobiri ◽  
E. E. Oguzie ◽  
Y. Li ◽  
L. Liu ◽  
N. C. Oforka ◽  
...  
Keyword(s):  
Brassica Oleracea ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Pipeline Steel ◽  
Electrochemical Techniques ◽  
Initial Increase ◽  
Mixed Inhibition ◽  
Extract Concentration

The inhibition capacity ofBrassica oleracea(BO) extract on the corrosion of pipeline steel in 0.5 M H2SO4was evaluated using electrochemical techniques. The results showed an excellent inhibition efficiency which increased with initial increase in extract concentration and temperature to a point and decreased with further increase in BO extract concentration and temperature. Mixed inhibition behaviour was proposed for the action of BO. The unique behaviour of BO was attributed to the organic entities present in the extract.

scholarly journals The synthesis and characterization of benzotriazole-based cationic surfactants and the evaluation of their corrosion inhibition efficiency on copper in seawater

RSC Advances ◽  
2019 ◽  
Vol 9 (46) ◽  
pp. 27069-27082 ◽  
Author(s):  
M. A. Migahed ◽  
Ahmed Nasser ◽  
H. Elfeky ◽  
M. M. EL-Rabiei
Keyword(s):  
Cationic Surfactants ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Electrochemical Techniques ◽  
Synthesis And Characterization ◽  
Force Microscopy ◽  
Copper Electrodes ◽  
Atomic Force ◽  
Corrosion Inhibition Efficiency

Three cationic surfactants based on benzotriazole were prepared and their efficiencies as corrosion inhibitors for copper electrodes in seawater were evaluated using different electrochemical techniques (polarization methods, EIS techniques and atomic force microscopy).

Sign in / Sign up

Export Citation Format

Share Document