scholarly journals Synthesis, Characterization, and Photocatalytic Activity of Microspheres Functionalized with Porphyrin

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Jin-Hua Cai ◽  
Jin-Wang Huang ◽  
Han-Cheng Yu ◽  
Liang-Nian Ji

In order to utilize visible light more efficiently in the photocatalytic reaction, microspheres sensitized by 5-(4-allyloxy)phenyl-10,15,20-tri(4-methylphenyl)porphyrin (APTMPP) were prepared and characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen physisorption, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and UV-vis diffuse reflectance spectroscopy, and so forth, The characterization results indicated that APTMPP-MPS- was composed of the anatase crystal phase. The morphology of the composite materials was spheriform with size of 0.3–0.7 μm and the porphyrin was chemisorbed on the surface of through a Si–O–Ti bond. The photooxidation ofα-terpinene was employed as the model reaction to evaluate the photocatalytic activity of APTMPP-MPS- microspheres under visible light. The results indicated that the photodegradation ofα-terpinene was significantly enhanced in the presence of the APTMPP-MPS- compared with the nonmodified under visible light.

2014 ◽  
Vol 809-810 ◽  
pp. 890-894
Author(s):  
Dan Li ◽  
Lian Wei Shan ◽  
Gui Lin Wang ◽  
Li Min Dong ◽  
Wei Li ◽  
...  

Boron-BiVO4 samples were synthesized by sol-gel method. They were characterized by UV-vis diffuse reflectance spectroscopy, X-ray diffraction. Photocatalytic activity of the obtained BiVO4 samples was investigated through degrading methylene blue (MB). The results reveal that boron-BiVO4 catalysts have monoclinic scheelite structure. The BiVO4 and Co-BiVO4 photocatalysts were responsive to visible light. Co-BiVO4 photocatalyst showed higher photocatalytic activity than pure BiVO4, resulting in the significantly improved efficiency of degradation of MB.


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yunling Zou ◽  
Xianshou Huang ◽  
Tao Yu ◽  
Xiaoqiang Tong ◽  
Yan Li ◽  
...  

Abstract Cu-doped TiO2 having a brookite phase and showing enhanced visible light photocatalytic activity was synthesized using a mild solvothermal method. The as-prepared samples were characterized by various techniques, such as X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-Vis diffuse reflectance spectroscopy. Photocatalytic activity of Cu-doped brookite TiO2 nanoparticles was evaluated by photodegradation of methylene blue under visible light irradiation. The X-ray diffraction analysis showed that the crystallite size of Cu-doped brookite TiO2 samples decreased with the increase of Cu concentration in the samples. The UV-Vis diffuse reflectance spectroscopy analysis of the Cu-doped TiO2 samples showed a shift to lower energy levels in the band gap compared with that of bare phase brookite TiO2. Cu doped brookite TiO2 can obviously improve its visible light photocatalytic activity because of Cu ions acting as electron acceptors and inhibiting electron-hole recombination. The brookite TiO2 sample with 7.0 wt.% Cu showed the highest photocatalytic activity and the corresponding degradation rate of MB (10 mg/L) reached to 87 % after visible light illumination for 120 min, much higher than that of bare brookite TiO2 prepared under the same conditions (78 %).


2011 ◽  
Vol 396-398 ◽  
pp. 854-857 ◽  
Author(s):  
Zheng Hua Xiao ◽  
Jun Bo Zhong ◽  
Jian Zhang Li ◽  
Wei Hu

It has been found that the photocatalytic activity of ZnO toward the decolorization of Methyl Orange solution can be greatly improved by loading Ag on the surface of ZnO using a photodeposition method. The photocatalysts were characterized by X-ray diffraction(XRD), UV-Vis diffuse reflectance spectroscopy and X-ray photoelectron spectroscopy(XPS), respectively. 0.5%Ag/ZnO demonstrates 2.13 times the photocatalytic activity of pure ZnO.


2014 ◽  
Vol 881-883 ◽  
pp. 1101-1104 ◽  
Author(s):  
Min Jie Zhou ◽  
Peng Cui

In this work, flower-like ZnIn2S4 microspheres were synthesized using a solvothermal method. The as-synthesized samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and ultraviolet-visible diffuse reflectance spectroscopy (DRS) techniques. The photocatalytic activity of the ZnIn2S4 microspheres was investigated. The ZnIn2S4 microspheres exhibit much higher photocatalytic activity than pure P25 TiO2.


2013 ◽  
Vol 860-863 ◽  
pp. 907-910
Author(s):  
Xiao Xia Lin ◽  
Jia Liu ◽  
De Gang Fu

B-doped TiO2nanotube arrays (B-TNTs) were synthesized by anodization method combined with dip-calcination technique. The physicochemical properties and surface morphology were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and UV-Vis diffuse reflectance spectrum (DRS). Methyl blue (MB) solution was utilized as the degradation model to evaluate the photocatalytic activity of B-TNTs under visible light irradiation. The results show B-TNTs shifts the absorption edge of TiO2nanotube arrays to the visible light region and B-TNTs displays higher photocatalytic activity compared with undoped TNTs.


2016 ◽  
Vol 4 (18) ◽  
pp. 6946-6954 ◽  
Author(s):  
E. N. K. Glover ◽  
S. G. Ellington ◽  
G. Sankar ◽  
R. G. Palgrave

The nature and effects of rhodium and antimony doping in TiO2 have been investigated using X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Extended X-ray Absorption Fine Structure (EXAFS), X-ray Absorption Near Edge Structure (XANES) and diffuse reflectance spectroscopy.


2020 ◽  
Vol 20 (6) ◽  
pp. 1441
Author(s):  
Uyi Sulaeman ◽  
Suhendar Suhendar ◽  
Hartiwi Diastuti ◽  
Roy Andreas ◽  
Shu Yin

The defect and metallic silver (Ag) in silver phosphate (Ag3PO4) photocatalyst were successfully generated using hydroxyapatite (HA) and glucose. Two steps of synthesis were done in these experiments. Firstly, the Ag/HA powder was prepared by reacting AgNO3 and HA, followed by the addition of a glucose solution. Secondly, the suspension of Ag/HA was reacted with AgNO3 aqueous solution. The yellow product of Ag/Ag3PO4 photocatalyst was produced. The products were characterized using X-Ray Diffraction (XRD), Diffuse Reflectance Spectroscopy (DRS), Scanning Electron Microscope (SEM), Brunauer–Emmett–Teller (BET) and X-ray Photoelectron Spectroscopy (XPS). The decreased ratio of O/Ag and metallic Ag formation observed by the XPS was detected as the possible defect and Ag-doping in the photocatalyst. The enhanced photocatalytic activity might be caused by the oxygen vacancy and metallic Ag in Ag3PO4 that enables the separation of photo-generated electrons and holes.


2020 ◽  
Vol 9 (3) ◽  
pp. 94-100
Author(s):  
Kim Nguyen Van ◽  
Nga Nguyen Thi Viet ◽  
Tuyen Vo Thi Thanh ◽  
Vien Vo

Composite ZnO/CuO was prepared by direct formation of ZnO from Zn(OOCCH3)2 precursor in the presence of CuO with the assistant of the microwave system. The obtained composite was characterized by X-Ray Diffraction (XRD) and Ultraviolet–Visible Diffuse Reflectance Spectroscopy (UV-vis DRS), which shows that the composite with a bandgap of 3.27 eV contains two components, ZnO and CuO. The photocatalytic activity of ZnO/CuO was assessed by the degradation of methylene blue (MB) in water under visible light, shows that the photocatalytic activity for the ZnO/CuO composite was remarkably improved compared to single ZnO and CuO. This result is attributed to the reduced recombination rate of photogenerated electron-hole pairs by the presence of CuO in the composite, therefore photocatalysis activity increases.


2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Tong-ming Su ◽  
Zu-zeng Qin ◽  
Hong-bing Ji ◽  
Yue-xiu Jiang

With strong adsorption selectivity and thermal stability, Y2O3was added to ZnO to obtain Y2O3-ZnO complex oxides by a precipitation method. The Y2O3-ZnO complex oxides were characterized by X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, UV-vis diffuse reflectance spectroscopy, physisorption analyzer, and terephthalic acid photoluminescence probing techniques and were used for the degradation of 2,4-dinitrophenol. More hydroxyl radicals were generated on the surface of the ZnO after adding moderate Y2O3. The Y2O3-ZnO complex oxides which contained 0.50% Y2O3were proved to be the optimal photocatalyst and achieved a degradation of 81.2% of 2,4-dinitrophenol solution, compared to 57.6% achieved under the same photocatalytic conditions with ZnO alone.


2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Qianzhi Xu ◽  
Xiuying Wang ◽  
Xiaoli Dong ◽  
Chun Ma ◽  
Xiufang Zhang ◽  
...  

S/Zn codoped TiO2nanomaterials were synthesized by a sol-gel method. X-ray diffraction, UV-vis diffuse reflectance spectroscopy, transmission electron microscopy, photoluminescence spectroscopy, and X-ray photoelectron spectroscopy were used to characterize the morphology, structure, and optical properties of the prepared samples. The introduction of Zn and S resulted in significant red shift of absorption edge for TiO2-based nanomaterials. The photocatalytic activity was evaluated by degrading reactive brilliant red X-3B solution under simulated sunlight irradiation. The results showed S/Zn codoped TiO2exhibited higher photocatalytic activity than pure TiO2and commercial P25, due to the photosynergistic effect of obvious visible light absorption, efficient separation of photoinduced charge carriers, and large surface area. Moreover, the content of Zn and S in the composites played important roles in photocatalytic activity of TiO2-based nanomaterials.


Sign in / Sign up

Export Citation Format

Share Document