scholarly journals Cu-doped TiO2 brookite photocatalyst with enhanced visible light photocatalytic activity

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yunling Zou ◽  
Xianshou Huang ◽  
Tao Yu ◽  
Xiaoqiang Tong ◽  
Yan Li ◽  
...  

Abstract Cu-doped TiO2 having a brookite phase and showing enhanced visible light photocatalytic activity was synthesized using a mild solvothermal method. The as-prepared samples were characterized by various techniques, such as X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-Vis diffuse reflectance spectroscopy. Photocatalytic activity of Cu-doped brookite TiO2 nanoparticles was evaluated by photodegradation of methylene blue under visible light irradiation. The X-ray diffraction analysis showed that the crystallite size of Cu-doped brookite TiO2 samples decreased with the increase of Cu concentration in the samples. The UV-Vis diffuse reflectance spectroscopy analysis of the Cu-doped TiO2 samples showed a shift to lower energy levels in the band gap compared with that of bare phase brookite TiO2. Cu doped brookite TiO2 can obviously improve its visible light photocatalytic activity because of Cu ions acting as electron acceptors and inhibiting electron-hole recombination. The brookite TiO2 sample with 7.0 wt.% Cu showed the highest photocatalytic activity and the corresponding degradation rate of MB (10 mg/L) reached to 87 % after visible light illumination for 120 min, much higher than that of bare brookite TiO2 prepared under the same conditions (78 %).

2014 ◽  
Vol 809-810 ◽  
pp. 890-894
Author(s):  
Dan Li ◽  
Lian Wei Shan ◽  
Gui Lin Wang ◽  
Li Min Dong ◽  
Wei Li ◽  
...  

Boron-BiVO4 samples were synthesized by sol-gel method. They were characterized by UV-vis diffuse reflectance spectroscopy, X-ray diffraction. Photocatalytic activity of the obtained BiVO4 samples was investigated through degrading methylene blue (MB). The results reveal that boron-BiVO4 catalysts have monoclinic scheelite structure. The BiVO4 and Co-BiVO4 photocatalysts were responsive to visible light. Co-BiVO4 photocatalyst showed higher photocatalytic activity than pure BiVO4, resulting in the significantly improved efficiency of degradation of MB.


2011 ◽  
Vol 117-119 ◽  
pp. 803-806
Author(s):  
Pei Song Tang ◽  
Hai Feng Chen ◽  
Feng Cao ◽  
Guo Xiang Pan ◽  
Min Hong Xu

The Nano-Bi2MoO6was prepared using Bi(NO3)3•5H2O and Na2MoO4•2H2O as starting materials by a hydrothermal process. The prepared Bi2MoO6product was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-visible diffuse reflectance spectroscopy (DRS). It was found that the prepared nano-Bi2MoO6show narrow band gap of 2.88 eV. Consequently, the prepared nano-Bi2MoO6show high visible-light photocatalytic activity for decomposition of Rhodamine B in comparison with the commercial Degussa P25, which was ascribed to the visible-light absorption.


2011 ◽  
Vol 391-392 ◽  
pp. 1117-1122 ◽  
Author(s):  
Qi Xiao ◽  
Chi Yao

The C, N, S-tridoped TiO2nanosheets are synthesized via hydrothermal synthesis and post-treatment, and characterized by X-ray diffraction (XRD), Transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), and UV–vis diffuse reflectance spectroscopy. The UV-diffuse reflectance spectra of all the C, N, S-tridoped TiO2nanosheets greatly extends the absorption edge into the visible light region, which can be attributed to C, N, S-tridoping in the form of cation C-doping, interstitial N-doping, anionic S-doping, and adsorbed SO42-ions states. The C, N, S-tridoped TiO2nanosheets exhibits high visible light photocatalytic activity, and the xanthate concentration reduce as much as 100% in 120 min. All these indicate that C, N, S-tridoped TiO2nanosheets photocatalysts are promising visible light photocatalyst for the practical application.


2015 ◽  
Vol 68 (10) ◽  
pp. 1562 ◽  
Author(s):  
Fengjun Zhang ◽  
Guosheng Xiao ◽  
Wei Lu ◽  
Tianye Wang ◽  
Limin Xuan ◽  
...  

Eu-Doped Bi2O3/CeO2 composites were successfully synthesized by a facile sol–gel–calcination route. The as-prepared composites were prepared with different molar ratios of Bi/Ce/Eu by the sol–gel route, and then calcined at 500°C for 2 h. The photocatalytic efficiencies of all composites were tested by degradation of methyl orange (MO) under visible light irradiation. The result suggested that the best composite is the one that was prepared with a Bi/Ce/Eu mole ratio of 8 : 8 : 1, and achieved a MO degradation rate of nearly 98.5 % within 2 h of irradiation. The as-prepared composites were characterized by X-ray diffraction, scanning electron microscopy, inductively coupled plasma mass spectrometry, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV-visible diffuse reflectance spectroscopy, and photoluminescence spectroscopy. The X-ray diffraction and scanning electron microscopy results suggested that Eu doping may have led to some lattice distortion and particle aggregation that enhanced the photocatalytic activity of the photocatalyst. The UV-visible diffuse reflectance spectroscopy and photoluminescence spectroscopy results showed that Eu-doped Bi2O3/CeO2 exhibited higher visible light response properties and enhanced separation of the photogenerated electron–hole pairs, which is the main reason for the higher photocatalytic activity. In general, this study could provide a facile route to synthesize Eu-doped Bi2O3/CeO2 composites with enhanced photocatalytic activity by a sol–gel–calcination route for environmental purification.


2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Jin-Hua Cai ◽  
Jin-Wang Huang ◽  
Han-Cheng Yu ◽  
Liang-Nian Ji

In order to utilize visible light more efficiently in the photocatalytic reaction, microspheres sensitized by 5-(4-allyloxy)phenyl-10,15,20-tri(4-methylphenyl)porphyrin (APTMPP) were prepared and characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen physisorption, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and UV-vis diffuse reflectance spectroscopy, and so forth, The characterization results indicated that APTMPP-MPS- was composed of the anatase crystal phase. The morphology of the composite materials was spheriform with size of 0.3–0.7 μm and the porphyrin was chemisorbed on the surface of through a Si–O–Ti bond. The photooxidation ofα-terpinene was employed as the model reaction to evaluate the photocatalytic activity of APTMPP-MPS- microspheres under visible light. The results indicated that the photodegradation ofα-terpinene was significantly enhanced in the presence of the APTMPP-MPS- compared with the nonmodified under visible light.


2012 ◽  
Vol 486 ◽  
pp. 124-128 ◽  
Author(s):  
Yi Tong ◽  
Pei Song Tang

The FeVO4 nanoparticles were synthesized by a precipitation process. The FeVO4 nanoparticles were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-Vis diffuse reflectance spectroscopy (DRS). It was found that the prepared FeVO4 nanoparticles show an average grain size of 50-80 nm in diameter, and strong visible-light absorption with absorption onset of 515 nm, indicating a narrow optical band gap of 2.4 eV. Consequently, the FeVO4 nanoparticles show high visible-light photocatalytic activity for decomposition of methyl orange.


2014 ◽  
Vol 881-883 ◽  
pp. 1101-1104 ◽  
Author(s):  
Min Jie Zhou ◽  
Peng Cui

In this work, flower-like ZnIn2S4 microspheres were synthesized using a solvothermal method. The as-synthesized samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and ultraviolet-visible diffuse reflectance spectroscopy (DRS) techniques. The photocatalytic activity of the ZnIn2S4 microspheres was investigated. The ZnIn2S4 microspheres exhibit much higher photocatalytic activity than pure P25 TiO2.


2011 ◽  
Vol 284-286 ◽  
pp. 734-737 ◽  
Author(s):  
Pei Song Tang ◽  
Hai Feng Chen ◽  
Feng Cao ◽  
Guo Xiang Pan ◽  
Kun Yan Wang

Monophasic orthorhombic InVO4 was synthesized using InCl3 and NH4VO3 as starting materials by a hydrothermal approach. The as-prepared InVO4 product was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-visible diffuse reflectance spectroscopy (DRS). It was found that the as-prepared InVO4 shows strong visible-light absorption with absorption onset of 515 nm, indicating a narrow optical band gap of 2.4 eV. Furthermore, the as-prepared InVO4 shows high visible-light photocatalytic activity for decomposition of methyl orange, which is ascribed to the strong visible-light absorption.


2014 ◽  
Vol 898 ◽  
pp. 23-26
Author(s):  
Jing Li ◽  
Wei Sun ◽  
Wei Min Dai ◽  
Yong Cai Zhang

TiO2/SnS2 nanocomposite was synthesized via hydrothermal treatment of tin (IV) chloride pentahydrate, thioacetamide and TiO2 nanotubes in deionized water at 150 °C for 3 h. The structure, composition and optical property of the as-synthesized nanocomposite were characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy and UV-vis diffuse reflectance spectra, and its photocatalytic property was tested in the reduction of aqueous Cr6+ under visible-light (λ > 420 nm) irradiation. It was observed that TiO2 nanotubes exhibited no photocatalytic activity, whereas TiO2/SnS2 nanocomposite exhibited photocatalytic activity in the reduction of aqueous Cr6+ under visible-light (λ > 420 nm) irradiation.


2020 ◽  
Vol 9 (3) ◽  
pp. 94-100
Author(s):  
Kim Nguyen Van ◽  
Nga Nguyen Thi Viet ◽  
Tuyen Vo Thi Thanh ◽  
Vien Vo

Composite ZnO/CuO was prepared by direct formation of ZnO from Zn(OOCCH3)2 precursor in the presence of CuO with the assistant of the microwave system. The obtained composite was characterized by X-Ray Diffraction (XRD) and Ultraviolet–Visible Diffuse Reflectance Spectroscopy (UV-vis DRS), which shows that the composite with a bandgap of 3.27 eV contains two components, ZnO and CuO. The photocatalytic activity of ZnO/CuO was assessed by the degradation of methylene blue (MB) in water under visible light, shows that the photocatalytic activity for the ZnO/CuO composite was remarkably improved compared to single ZnO and CuO. This result is attributed to the reduced recombination rate of photogenerated electron-hole pairs by the presence of CuO in the composite, therefore photocatalysis activity increases.


Sign in / Sign up

Export Citation Format

Share Document