scholarly journals Assessment of CTF Boiling Transition and Critical Heat Flux Modeling Capabilities Using the OECD/NRC BFBT and PSBT Benchmark Databases

2013 ◽  
Vol 2013 ◽  
pp. 1-12
Author(s):  
Maria Avramova ◽  
Diana Cuervo

Over the last few years, the Pennsylvania State University (PSU) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has prepared, organized, conducted, and summarized two international benchmarks based on the NUPEC data—the OECD/NRC Full-Size Fine-Mesh Bundle Test (BFBT) Benchmark and the OECD/NRC PWR Sub-Channel and Bundle Test (PSBT) Benchmark. The benchmarks’ activities have been conducted in cooperation with the Nuclear Energy Agency/Organization for Economic Co-operation and Development (NEA/OECD) and the Japan Nuclear Energy Safety (JNES) Organization. This paper presents an application of the joint Penn State University/Technical University of Madrid (UPM) version of the well-known sub-channel code COBRA-TF (Coolant Boiling in Rod Array-Two Fluid), namely, CTF, to the steady state critical power and departure from nucleate boiling (DNB) exercises of the OECD/NRC BFBT and PSBT benchmarks. The goal is two-fold: firstly, to assess these models and to examine their strengths and weaknesses; and secondly, to identify the areas for improvement.

2013 ◽  
Vol 2013 ◽  
pp. 1-20 ◽  
Author(s):  
M. Avramova ◽  
A. Rubin ◽  
H. Utsuno

The Pennsylvania State University (PSU) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has prepared, organized, conducted, and summarized the Organisation for Economic Co-operation and Development/US Nuclear Regulatory Commission (OECD/NRC) benchmark based on the Nuclear Power Engineering Corporation (NUPEC) pressurized water reactor (PWR) subchannel and bundle tests (PSBTs). The international benchmark activities have been conducted in cooperation with the Nuclear Energy Agency (NEA) of OECD and the Japan Nuclear Energy Safety Organization (JNES), Japan. The OECD/NRC PSBT benchmark was organized to provide a test bed for assessing the capabilities of various thermal-hydraulic subchannel, system, and computational fluid dynamics (CFDs) codes. The benchmark was designed to systematically assess and compare the participants’ numerical models for prediction of detailed subchannel void distribution and department from nucleate boiling (DNB), under steady-state and transient conditions, to full-scale experimental data. This paper provides an overview of the objectives of the benchmark along with a definition of the benchmark phases and exercises. The NUPEC PWR PSBT facility and the specific methods used in the void distribution measurements are discussed followed by a summary of comparative analyses of submitted final results for the exercises of the two benchmark phases.


Author(s):  
J. Xu ◽  
C. Miller ◽  
C. Hofmayer ◽  
H. Graves

Motivated by many design considerations, several conceptual designs for advanced reactors have proposed that the entire reactor building and a significant portion of the steam generator building will be either partially or completely embedded below grade. For the analysis of seismic events, the soil-structure interaction (SSI) effect and passive earth pressure for these types of deeply embedded structures will have a significant influence on the predicted seismic response. Sponsored by the US Nuclear Regulatory Commission (NRC), Brookhaven National Laboratory (BNL) is carrying out a research program to assess the significance of these proposed design features for advanced reactors, and to evaluate the existing analytical methods to determine their applicability and adequacy in capturing the seismic behavior of the proposed designs. This paper summarizes a literature review performed by BNL to determine the state of knowledge and practice for seismic analyses of deeply embedded and/or buried (DEB) nuclear containment type structures. Included in the paper is BNL’s review of the open literature of existing standards, tests, and practices that have been used in the design and analysis of DEB structures. The paper also provides BNL’s evaluation of available codes and guidelines with respect to seismic design practice of DEB structures. Based on BNL’s review, a discussion is provided to highlight the applicability of the existing technologies for seismic analyses of DEB structures and to identify gaps that may exist in knowledge and potential issues that may require better understanding and further research.


2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Jinghan Zhang ◽  
Jun Zhao ◽  
Jiejuan Tong

Nuclear safety goal is the basic standard for limiting the operational risks of nuclear power plants. The statistics of societal risks are the basis for nuclear safety goals. Core damage frequency (CDF) and large early release frequency (LERF) are typical probabilistic safety goals that are used in the regulation of water-cooled reactors currently. In fact, Chinese current probabilistic safety goals refer to the Nuclear Regulatory Commission (NRC) and the International Atomic Energy Agency (IAEA), and they are not based on Chinese societal risks. And the CDF and LERF proposed for water reactor are not suitable for high-temperature gas-cooled reactors (HTGR), because the design of HTGR is very different from that of water reactor. And current nuclear safety goals are established for single reactor rather than unit or site. Therefore, in this paper, the development of the safety goal of NRC was investigated firstly; then, the societal risks in China were investigated in order to establish the correlation between the probabilistic safety goal of multimodule HTGR and Chinese societal risks. In the end, some other matters about multireactor site were discussed in detail.


Author(s):  
Christopher S. Bajwa ◽  
Earl P. Easton ◽  
Darrell S. Dunn

In 2007, a severe transportation accident occurred in Oakland, California in what is commonly known as the “MacArthur Maze” section of Interstate 580 (I-580). The accident involved a tractor trailer carrying gasoline that impacted an overpass support column and burst into flames. The subsequent fire burned for over 2 hours and led to the collapse of the overpass due to the loss of strength in the structural steel that supported the overpass. The US Nuclear Regulatory Commission (NRC) studied this accident to examine any potential regulatory implications related to the safe transport of radioactive materials, including spent nuclear fuel. This paper will discuss the details of the NRC’s MacArthur Maze fire investigation.


Author(s):  
Tomas Jimenez ◽  
Eric Houston ◽  
Nico Meyer

As most nuclear power stations in the US have surpassed their initial 40 years of operability, the industry is now challenged with maintaining safe operations and extending the operating life of structures, systems and components. The US Nuclear Regulatory Commission (NRC), Nuclear Energy Institute (NEI), and Electric Power Research Institute (EPRI) have identified safety related buried piping systems as particularly susceptible to degradation. These systems are required to maintain the structural factors of the ASME Construction Codes under pressure and piping loads, which includes seismic wave passage. This paper focuses on evaluation approaches for metallic buried piping that can be used to demonstrate that localized thinning meets the requirements of the Construction Code. The paper then addresses a non-metallic repair option using carbon fiber reinforced polymers (CFRP) as the new pressure boundary.


Author(s):  
Andrew Whittaker ◽  
Yin-Nan Huang ◽  
Bozidar Stojadinovic

The next edition of ASCE Standard 4 will include detailed provisions for the seismic isolation of structures, systems and components in safety-related nuclear structures. The provisions are based on those available in North America for buildings, bridges and other infrastructure but address issues particular to nuclear energy construction and take advantage of recent research funded by federal agencies, including the Nuclear Regulatory Commission and the National Science Foundation. The paper highlights these research products and their incorporation into ASCE Standard 4. Although the focus of the studies and ASCE Standard 4 is analysis of conventional light water reactors of 500+MWe, most of the conclusions are applicable to small modular reactors.


1983 ◽  
Author(s):  
F.J. Cronin ◽  
R.J. Nesse ◽  
M. Vaeth ◽  
A.R. Wusterbarth ◽  
J.W. Currie

Sign in / Sign up

Export Citation Format

Share Document