scholarly journals Application of a New Wavelet Threshold Method in Unconventional Oil and Gas Reservoir Seismic Data Denoising

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Guxi Wang ◽  
Ling Chen ◽  
Si Guo ◽  
Yu Peng ◽  
Ke Guo
Keyword(s):  
Data Processing ◽  
Seismic Data ◽  
Signal To Noise Ratio ◽  
Random Noise ◽  
Three Dimensional ◽  
Threshold Function ◽  
Signal To Noise ◽  
Gas Reservoir ◽  
Seismic Processing ◽  
Noise Ratio

Seismic data processing is an important aspect to improve the signal to noise ratio. The main work of this paper is to combine the characteristics of seismic data, using wavelet transform method, to eliminate and control such random noise, aiming to improve the signal to noise ratio and the technical methods used in large data systems, so that there can be better promotion and application. In recent years, prestack data denoising of all-digital three-dimensional seismic data is the key to data processing. Contrapose the characteristics of all-digital three-dimensional seismic data, and, on the basis of previous studies, a new threshold function is proposed. Comparing between conventional hard threshold and soft threshold, this function not only is easy to compute, but also has excellent mathematical properties and a clear physical meaning. The simulation results proved that this method can well remove the random noise. Using this threshold function in actual seismic processing of unconventional lithologic gas reservoir with low porosity, low permeability, low abundance, and strong heterogeneity, the results show that the denoising method can availably improve seismic processing effects and enhance the signal to noise ratio (SNR).

Random denoising and signal nonlinearity approach by time-frequency peak filtering using weighted frequency reassignment

Geophysics ◽  
2013 ◽  
Vol 78 (6) ◽  
pp. V229-V237 ◽  
Author(s):  
Hongbo Lin ◽  
Yue Li ◽  
Baojun Yang ◽  
Haitao Ma
Keyword(s):  
Weight Function ◽  
Instantaneous Frequency ◽  
Seismic Data ◽  
Signal To Noise Ratio ◽  
Random Noise ◽  
Signal To Noise ◽  
Transform Method ◽  
Time Frequency ◽  
Frequency Peak ◽  
Noise Ratio

Time-frequency peak filtering (TFPF) may efficiently suppress random noise and hence improve the signal-to-noise ratio. However, the errors are not always satisfactory when applying the TFPF to fast-varying seismic signals. We begin with an error analysis for the TFPF by using the spread factor of the phase and cumulants of noise. This analysis shows that the nonlinear signal component and non-Gaussian random noise lead to the deviation of the pseudo-Wigner-Ville distribution (PWVD) peaks from the instantaneous frequency. The deviation introduces the signal distortion and random oscillations in the result of the TFPF. We propose a weighted reassigned smoothed PWVD with less deviation than PWVD. The proposed method adopts a frequency window to smooth away the residual oscillations in the PWVD, and incorporates a weight function in the reassignment which sharpens the time-frequency distribution for reducing the deviation. Because the weight function is determined by the lateral coherence of seismic data, the smoothed PWVD is assigned to the accurate instantaneous frequency for desired signal components by weighted frequency reassignment. As a result, the TFPF based on the weighted reassigned PWVD (TFPF_WR) can be more effective in suppressing random noise and preserving signal as compared with the TFPF using the PWVD. We test the proposed method on synthetic and field seismic data, and compare it with a wavelet-transform method and [Formula: see text] prediction filter. The results show that the proposed method provides better performance over the other methods in signal preserving under low signal-to-noise ratio.

Signal-to-noise ratio enhancement for downhole microseismic data based on 3D shearlet transform

Geophysics ◽  
2019 ◽  
Vol 84 (3) ◽  
pp. V207-V218
Author(s):  
Juan Li ◽  
Yuan Li ◽  
Shou Ji ◽  
Yue Li ◽  
Zhihong Qian
Keyword(s):  
Noise Suppression ◽  
Signal To Noise Ratio ◽  
Random Noise ◽  
Great Difficulty ◽  
Threshold Function ◽  
Signal To Noise ◽  
Shearlet Transform ◽  
Microseismic Data ◽  
3D Matrix ◽  
Noise Ratio

Downhole microseismic data are characterized for their high frequency and small amplitude, which bring great difficulty for noise suppression. We present a random noise attenuation method for downhole microseismic data based on the 3D shearlet transform (3DST). In contrast to the 2D shearlet, 3DST takes into account the correlation among three components of downhole microseismic. With the help of correlation among the data, downhole microseismic data are reassembled into a new 3D matrix and then transformed to the shearlet domain. After the analysis of the coefficients’ energy and the high-order cumulant on each scale, an efficient threshold function is proposed. We apply a small threshold to the coefficients associated with the signal’s scales, and a large threshold is chosen for the scales of the noise. Experimental results indicate that the algorithm significantly improves the signal-to-noise ratio of the microseismic data and effectively preserves a valid signal.

Research on LIFT Technology for 3D Seismic Denoising in Coalfield

2014 ◽  
Vol 556-562 ◽  
pp. 6328-6331
Author(s):  
Su Zhen Shi ◽  
Yi Chen Zhao ◽  
Li Biao Yang ◽  
Yao Tang ◽  
Juan Li
Keyword(s):  
Signal To Noise Ratio ◽  
High Signal ◽  
3D Seismic ◽  
Signal To Noise ◽  
Denoising Method ◽  
Seismic Processing ◽  
Work Area ◽  
Noise Data ◽  
Noise Ratio ◽  
Effective Signal

The LIFT technology has applied in process of denoising to ensure the imaging precision of minor faults and structure in 3D coalfield seismic processing. The paper focused on the denoising process in two study areas where the LIFT technology is used. The separation of signal and noise is done firstly. Then denoising would be done in the noise data. The Data of weak effective signal that is from the noise data could be blended with the original effective signal to reconstruct the denoising data, so the result which has high signal-to-noise ratio and preserved amplitude is acquired. Thus the fact shows that LIFT is an effective denoising method for 3D seismic in coalfield and could be used widely in other work area.

scholarly journals Study on the Velocity Analysis Method of Low SNR Seismic Data

2021 ◽  
Vol 11 (1) ◽  
pp. 78
Author(s):  
Jianbo He ◽  
Zhenyu Wang ◽  
Mingdong Zhang
Keyword(s):  
Seismic Data ◽  
Fresnel Zone ◽  
Signal To Noise Ratio ◽  
Normal Wave ◽  
Curvature Radius ◽  
Velocity Spectrum ◽  
Velocity Analysis ◽  
Signal To Noise ◽  
Noise Ratio ◽  
Zero Offset

When the signal to noise ratio of seismic data is very low, velocity spectrum focusing will be poor., the velocity model obtained by conventional velocity analysis methods is not accurate enough, which results in inaccurate migration. For the low signal noise ratio (SNR) data, this paper proposes to use partial Common Reflection Surface (CRS) stack to build CRS gathers, making full use of all of the reflection information of the first Fresnel zone, and improves the signal to noise ratio of pre-stack gathers by increasing the number of folds. In consideration of the CRS parameters of the zero-offset rays emitted angle and normal wave front curvature radius are searched on zero offset profile, we use ellipse evolving stacking to improve the zero offset section quality, in order to improve the reliability of CRS parameters. After CRS gathers are obtained, we use principal component analysis (PCA) approach to do velocity analysis, which improves the noise immunity of velocity analysis. Models and actual data results demonstrate the effectiveness of this method.

Sign in / Sign up

Export Citation Format

Share Document