scholarly journals Effect of Particle Size on the Wear Property of Magnetorheological Fluid

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Qiuxiang Zhang ◽  
Xinhua Liu ◽  
Yankun Ren ◽  
Lifeng Wang ◽  
Yuan Hu
Keyword(s):  
Particle Size ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Magnetorheological Fluid ◽  
Test Methods ◽  
Wear Property ◽  
Preparation Process ◽  
Before And After ◽  
Effect Of Particle Size ◽  
Scanning Electron

Aiming to study the effect of particle size on the wear property of magnetorheological fluid (MRF), experiment materials, preparation process, and test methods are elaborated, and three different MRF samples consisting of particles of different size are prepared. Test experiments are carried out and the effect of particle size on the wear property of MRF is discussed. Moreover, the microstructures of particles extracted from MRF obtained before and after the wear experiments are observed by scanning electron microscope (SEM). Experimental results show that the particle size has a significant effect on wear property of MRF. Furthermore, the MRF with particles of 1.5–2.8 μm diameter on average is good for the requirement of engineering applications.

Effect of Kaolin Particle Size Towards Preparation of Kaolin Ceramic Membrane

2021 ◽  
Vol 02 (01) ◽  
Author(s):  
Siti Khadijah Hubadillah ◽  
◽  
Norsiah Hami ◽  
Nurul Azita Salleh ◽  
Mohd Riduan Jamalludin ◽  
...  
Keyword(s):  
Particle Size ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Field Emission ◽  
Preliminary Data ◽  
Membrane Structure ◽  
Ceramic Membrane ◽  
Low Cost ◽  
Dense Structure ◽  
Scanning Electron

The purpose of this work is to study the effect of kaolin particle size for the preparation of low cost ceramic membrane suspension and ceramic membrane structure. Kaolin particle size is categorized into two categories; i) ≤ 1µm and ii) ≥ 1 µm. The suspension is prepared via stirring technique under 1000 rpm at 60°C. The particle size of kaolin is characterized using field emission scanning electron microscope (FESEM) and the prepared suspension is characterized in term of its viscosity. Results indicate that the particle size gave significant effect to the viscosity of ceramic membrane suspension. Preliminary data showed that kaolin with particle size ≤ 1µm resulted ceramic membrane with dense structure.

Exploring the Parameter Space of Point Spread Function Determination for the Scanning Electron Microscope—Part II: Effect on Image Restoration Quality

2019 ◽  
Vol 25 (05) ◽  
pp. 1183-1194
Author(s):  
Mandy C. Nevins ◽  
Richard K. Hailstone ◽  
Eric Lifshin
Keyword(s):  
Particle Size ◽  
Electron Microscope ◽  
Image Quality ◽  
Scanning Electron Microscope ◽  
Image Restoration ◽  
Point Spread Function ◽  
Background Correction ◽  
Point Spread ◽  
Spread Function ◽  
Scanning Electron

AbstractPoint spread function (PSF) deconvolution is an attractive software-based technique for resolution improvement in the scanning electron microscope (SEM) because it can restore information which has been blurred by challenging operating conditions. In Part 1, we studied a modern PSF determination method for SEM and explored how various parameters affected the method's ability to accurately estimate the PSF. In Part 2, we extend this exploration to PSF deconvolution for image restoration. The parameters include reference particle size, PSF smoothing (K), background correction, and restoration denoising (λ). Image quality was assessed by visual inspection and Fourier analysis. Overall, PSF deconvolution improved image quality. Low λ enhanced image sharpness at the cost of noise, while high λ created smoother restorations with less detail. λ should be chosen to balance feature preservation and denoising based on the application. Reference particle size within ±0.9 nm and K within a reasonable range had little effect on restoration quality. Restorations using background-corrected PSFs had superior quality compared with using no background correction, but if the correction was too high, the PSF was cut off causing blurrier restorations. Future efforts to automatically determine parameters would remove user guesswork, improve this method's consistency, and maximize interpretability of outputs.

Automation of size fractionation to extract clays and silts

Clay Minerals ◽  
2011 ◽  
Vol 46 (3) ◽  
pp. 515-523 ◽  
Author(s):  
Youjun Deng ◽  
M. G. Tenorio Arvide
Keyword(s):  
Particle Size ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Laser Diffraction ◽  
Size Fractionation ◽  
Microscope Examination ◽  
Household Appliance ◽  
Lawn Irrigation ◽  
Sedimentation Time ◽  
Scanning Electron

AbstractThe objective of this study was to build an automated size fractionator to process up to 16 samples at one time. Most parts used in the apparatus are inexpensive items, available from lawn irrigation, household appliance and aquatic pet supply stores. The device can be used to extract different silt and clay fractions by changing sedimentation time. A bentonite, a kaolin and an ironoxide-rich Oxisol were fractionated by this instrument to sequentially extract particles that have sizes equivalent to <2 µm, <5 µm, <10 µm and <20 µm quartz spheres. A laser diffraction particle size analyser revealed size differences in the different fractions and also showed that the silt fractions contained particles having slightly larger sizes than the assumed diameters of spherical quartz. Scanning electron microscope examination suggested that the greater particle size was mainly due to the non-spherical shapes of the particles and a reduced bulk density of the porous aggregates.

scholarly journals Influence of the Drive Plate with Different Surface Textures on the Property of Carbonyl Iron-Based Magnetorheological Fluid

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
He Lu ◽  
Lifeng Wang ◽  
Lili Dai ◽  
Hongxing Ding ◽  
Qiuxiang Zhang ◽  
...  
Keyword(s):  
Surface Topography ◽  
Carbonyl Iron ◽  
Magnetorheological Fluid ◽  
Test Methods ◽  
Wear Property ◽  
Test Bed ◽  
Surface Textures ◽  
Surface Topographies ◽  
Iron Based ◽  
Scanning Electron

Aiming to study the effect of drive plate with different surface topographies on the wear property of magnetorheological fluid (MRF), some specific experiments are carried out and analyzed in this paper. Firstly, experiment materials and test methods for MRF are elaborated, and four different surface topography drive plates are designed and manufactured. MRF test-bed is built up to test the rheological properties of MRF. Moreover, the surface morphology of particles is taken using a scanning electron microscope (SEM). Finally, experimental results show that there are remarkable influences on tribological properties of carbonyl iron-based MRF with different drive plates. Therefore, the drive plate with specific surface topography can meet the needs of different MRF transmission systems.

Effect of Different Abrasives on Chemical Mechanical Polishing for Magnesia Alumina Spinel

2020 ◽  
Vol 866 ◽  
pp. 115-124
Author(s):  
Zhan Kui Wang ◽  
Ming Hua Pang ◽  
Jian Xiu Su ◽  
Jian Guo Yao
Keyword(s):  
Particle Size ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Chemical Mechanical Polishing ◽  
Removal Rate ◽  
Mechanical Polishing ◽  
Key Factors ◽  
Particle Size Analyzer ◽  
Scanning Electron ◽  
Shape And Size

In this paper, a series of chemical mechanical polishing (CMP) experiments for magnesia alumina (Mg-Al) spinel were carried out with different abrasives, and the materials removal rate (MRR) and surface quality was evaluated to explore their different effects. The scanning electron microscope (SEM) and laser particle size analyzer were also employed to test the micro-shape and size distribution of abrasives. Then, the mechanism of different effects with different abrasives was analyzed in CMP for Mg-Al spinel. Those experimental results suggest that different subjecting pressure ratios of abrasives to polishing pad with different abrasive are the key factors leading to difference polishing performances in CMP.

Preparation of Cr2O3 Nanoparticles via Hydrothermal Reduction of CH3OH

2012 ◽  
Vol 463-464 ◽  
pp. 760-763
Author(s):  
Zhen Zhao Pei ◽  
Hong Bin Xu ◽  
Yi Zhang
Keyword(s):  
Particle Size ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Average Particle Size ◽  
Average Particle ◽  
Calcination Temperatures ◽  
Cr2o3 Nanoparticles ◽  
Average Size ◽  
Hydrothermal Reduction ◽  
Scanning Electron

Nanoparticles of Cr2O3 were successfully obtained via hydrothermal reduction of CH3OH. The oxidant and chromium source was CrO3. The process needs no stirrer or surfactant and the CrO3 concentration was 0.83mol/L. The obtained products were loosely agglomerated Cr2O3 nanoparticles with the average size of 29 to 79 nm. Influences of reactant ratios and calcination temperatures on the specific surface area and average particle size were discussed. And the morphology of nanoparticles was investigated by use of field-emission scanning electron microscope.

Sign in / Sign up

Export Citation Format

Share Document