scholarly journals Management of Horizontal Root Fracture in the Middle Third via Intraradicular Splinting Using a Fiber Post

2016 ◽  
Vol 2016 ◽  
pp. 1-5
Author(s):  
Ishani Karhade ◽  
Meenal N. Gulve
Keyword(s):  
Glass Fiber ◽  
The Other ◽  
Lateral Incisor ◽  
Permanent Teeth ◽  
Fiber Post ◽  
Root Fracture ◽  
Glass Fiber Post ◽  
One Year ◽  
Horizontal Root Fracture

Radicular fractures in permanent teeth are uncommon injuries and account for only 0.5–7% of dental traumas. These fractures commonly result from a horizontal impact and are transverse to oblique in direction. Their incidence is more in the middle third of the root than at the apical and cervical thirds. This paper describes a case of complicated crown fracture of maxillary incisors along with horizontal root fracture at the middle third of maxillary right central and lateral incisor. The fractured root fragments of the upper right central and lateral incisor were united with the help of a glass fiber post after receiving an endodontic treatment. The other two incisors were treated endodontically followed by post endodontic restorations. Eventually the four incisors were restored with porcelain fused to metal crowns. A one-year follow-up revealed a well stabilized assembly of the root fragments and the post.

scholarly journals Conservative Management of the Horizontal Root Fracture in the Middle Third using Fiber Post as an Intraradicular Splint

2020 ◽  
Vol 8 (C) ◽  
pp. 146-150
Author(s):  
Sneha Dhruvkumar Vaswani ◽  
Sathish Abraham ◽  
Harshal Balasaheb Najan ◽  
Rohini Ramesh Karad
Keyword(s):  
Case Report ◽  
Glass Fibre ◽  
Dental Trauma ◽  
Permanent Teeth ◽  
Central Incisor ◽  
Fiber Post ◽  
Root Fracture ◽  
Root Fractures ◽  
Horizontal Root Fracture

BACKGROUND: Root fractures are uncommon injuries in permanent teeth and account for only 0.5–7% of dental trauma. It occurs more frequently in fully erupted permanent teeth, in which the completely formed root with closed apices is solidly supported in the bone and periodontium. This may lead to complex consequences due to the combined damage to the pulp, dentine, cementum, bone, and periodontium. They are transverse to oblique in direction and result from a horizontal impact. Their incidence is more in the middle third of the root than at the cervical and apical thirds. CASE REPORT: This paper describes a case of complicated horizontal root fracture at the middle third of the maxillary right central incisor. After receiving an endodontic treatment, the fractured root fragments of the maxillary right central incisors were united with the help of a glass fibre post. Eventually, the incisor was restored with a zirconia crown. CONCLUSION: Follow-up after a year revealed a well-stabilized assembly of the root fragments and the post.  

scholarly journals Bio-C Repair - A New Bioceramic Material for Root Perforation Management: Two Case Reports

2021 ◽  
Vol 32 (1) ◽  
pp. 104-110
Author(s):  
Kênia Soares de Toubes ◽  
Stephanie Quadros Tonelli ◽  
Caroline Felipe Magalhães Girelli ◽  
Camila Grasielle de Sá Azevedo ◽  
Ana Carolina Tocafundo Thompson ◽  
...  
Keyword(s):  
Case Reports ◽  
Treatment Strategies ◽  
Cone Beam ◽  
Radiographic Assessment ◽  
Fiber Post ◽  
Canal System ◽  
Gutta Percha ◽  
Glass Fiber Post ◽  
One Year

Abstract These case reports aimed to describe the management of lateral perforation in the middle cervical third of the root in two maxillary incisors with pulp canal calcification using Bio-C Repair, with safe and viable clinical treatment strategies. Digital radiographic exams were obtained with different angles and analyzed using different filters. Cone-beam computed tomography (CBCT) images were requested to show the actual position of the canal, location of the perforation, and guide the strategic planning of the case. Subsequently, cavity access was prepared with the aid of dental operating microscopy. After perforation was identified, granulation tissue was removed and the original canal was identified and then dressed with calcium hydroxide. In the second visit, the perforation was filled with Bio-C Repair and the canal system filled with gutta-percha points and a root canal sealer (Bio-C Sealer). The teeth were restored with glass fiber post, 4 mm beyond the perforation level, and provisory crowns. Both teeth treated as described above were functional and asymptomatic with a 1-year clinical and radiographic assessment. The Bio-C Repair is suggested as a new cement option for the management of lateral canal perforations, with effective results as observed after a one-year follow-up.

scholarly journals Endodontic and Orthodontic Management of Traumatically Intruded Teeth with Horizontal Root Fracture: A Case Report

2011 ◽  
Vol 2011 ◽  
pp. 1-6
Author(s):  
Marcos Jacobovitz ◽  
Adriana Maria Bonadio Lopes Ramos ◽  
Regina Karla de Pontes Lima ◽  
Fernanda Geraldes Pappen ◽  
Anna B. Fuks
Keyword(s):  
Case Report ◽  
Alternative Treatment ◽  
Orthodontic Treatment ◽  
Permanent Teeth ◽  
Central Incisor ◽  
Root Fracture ◽  
Postoperative Course ◽  
Open Apices ◽  
Horizontal Root Fracture

This report describes the case of an 8-year-old boy that was referred to endodontic and orthodontic treatment after suffering an injury that led to intrusion of the maxillary right permanent central incisor, palatal displacement of the upper right lateral incisor, and root fracture of both central incisors. Both injured teeth were immature and had open apices. The intruded tooth was repositioned by endodontic and orthodontic management. Endodontic therapy was performed in both teeth with periodical changes of calcium-hydroxide-based paste as root canal dressing and introduction of MTA as an apical barrier. The postoperative course was uneventful with clinical and radiographic success up to 3 and 1/2 years of follow up. In the present case, orthodontic repositioning combined with endodontic therapy constitued a viable alternative treatment for intrusive luxations in immature permanent teeth.

Use of a Direct Anatomic Post in a Flared Root Canal: A Three-year Follow-up

2016 ◽  
Vol 41 (1) ◽  
pp. E23-E28 ◽  
Author(s):  
GM Gomes ◽  
RV Monte-Alto ◽  
GO Santos ◽  
CK Fai ◽  
AD Loguercio ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Case Report ◽  
Glass Fiber ◽  
Root Canal ◽  
Resin Composite ◽  
Fiber Post ◽  
Clinical Protocol ◽  
Metal Free ◽  
Glass Fiber Post

SUMMARY The following case report describes the three-year follow-up after rehabilitation of a flared root canal using a direct anatomic post (a resin composite combined with a prefabricated glass fiber post) associated with metal-free ceramic restoration. The report presents the clinical protocol for the fabrication of the posts, which provide an intimate fit to the remaining root and mechanical properties similar to those of the dental structure. These posts serve as an alternative to conventional metal cores.

Bond strength between root dentin and three glass-fiber post systems

2006 ◽  
Vol 96 (1) ◽  
pp. 41-46 ◽  
Author(s):  
Mustafa Kalkan ◽  
Aslihan Usumez ◽  
A. Nilgun Ozturk ◽  
Sema Belli ◽  
Gurcan Eskitascioglu
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Fiber Post ◽  
Glass Fiber Post ◽  
Root Dentin

scholarly journals Evaluation of Different Restoration Combinations Used in the Reattachment of Fractured Teeth: A Finite Element Analysis

2018 ◽  
Vol 2018 ◽  
pp. 1-8
Author(s):  
Nagihan Guven ◽  
Ozgur Topuz ◽  
İhsan Yikilgan
Keyword(s):  
Finite Element Analysis ◽  
Glass Fiber ◽  
Composite Resin ◽  
Fracture Line ◽  
Core Material ◽  
Fiber Post ◽  
Stress Concentrations ◽  
Element Analysis ◽  
Composite Resin Restoration ◽  
Glass Fiber Post

Objective. The purpose of this study was to test different restoration combinations used for constructing fractured endodontically treated incisors by reattaching their fractured fragments. Methods. Seven types of 3-D FEM mathematical root canal-filled models were generated, simulating cases of (OB) reattaching fractured fragments; (CrPL) reattaching fractured fragments + ceramic palatinal laminate; (CmPL) reattaching fractured fragments + composite palatinal laminate; (CM) reattaching fractured fragments + coronal 1/3 of the root was filled using core material; (BP) reattaching fractured fragments + glass fiber post; (CP) composite resin restoration + glass fiber post; and (OC) composite resin restoration. A 100-N static oblique force was applied to the simulated teeth with 135° on the node at 2 mm above the cingulum to analyze the stress distribution at the tooth. Results. For enamel tissue, the highest stress values were observed in model BP, and the lowest stress values were observed in model CmPL. For dentine tissue, the highest stress concentrations were observed around the fracture line for all models. Conclusions. Reattachment of fractured fragments by bonding may be preferred as a restoration option for endodontically treated incisors; also, palatinal laminate decreases the stress values at tooth tissues, especially at the enamel and the fracture line.

scholarly journals Influence of Zingiber officinale Extract on Push-Out Bond Strength of Glass-Fiber Post

2018 ◽  
Vol 29 (1) ◽  
pp. 93-98 ◽  
Author(s):  
Tânia Mara da Silva ◽  
Virgílio Vilas Boas Fernandes Junior ◽  
Rosemary Soares de Santana ◽  
Renata Marques de Melo Marinho ◽  
Márcia Carneiro Valera ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Zingiber Officinale ◽  
Resin Cement ◽  
Fiber Post ◽  
Ginger Extract ◽  
Etch And Rinse ◽  
Glass Fiber Post ◽  
Push Out

Abstract The aim of this study was to evaluate in vitro the influence of 20% glycolic ginger extract on the bond strength of glass-fiber post cemented with etch-and-rinse or self-etching resin cement. Forty-eight bovine roots were standardized (17±0.5 mm) and randomly divided into two groups, according to irrigant used during biomechanical preparation: NaOCl: 1% sodium hypochlorite and GEN: 20% glycolic ginger extract. Root canal was prepared and randomly assigned to one of two subgroups (n=12), according to luting protocol: self-etching (RelyX U200) and etch-and-rinse (RelyX ARC). After 48 h, the roots were sectioned perpendicularly (4 in cervical third and 3 in middle third) and submitted to push-out bond strength test (50 kgf load cell, 1.0 mm/min). Failure mode was analyzed in SEM and stereomicroscopy. Data were analyzed by three-way ANOVA and Tukey tests (p<0.05). ANOVA revealed that there were no significant differences between U200 (2.01±0.17)B and ARC (1.93±0.12)B in GEN group, and at the cervical third for both irrigants, 2.69±0.16A and 2.54±0.17A, respectively. Middle third showed lower bond strength than cervical third, regardless the irrigant. Overall, the cervical third regardless the irrigant employed and the association between NaOCl and ARC, presented better adhesive performance.

Sign in / Sign up

Export Citation Format

Share Document