Endodontically Treated Maxillary Premolars Restored with Glass Fiber Post under All Ceramic Crown

Glass fiber posts and core are increasingly used in order to restore severely damaged endodontically treated teeth and particularly maxillary premolars that are prone to fracture. Their low modulus of elasticity which is similar to that of dentin allows the post to absorb stress and prevent root fracture. In addition, the glass fiber posts provide a natural hue by integrally bonding to the composite, thereby improving the aesthetics without compromising much on the strength. Various factors are involved in the longevity of such treatment option, remaining tooth structure seems to be the most important. Key words: glass fiber posts, premolars, endodontically treated teeth, composite resin, fracture resistance, crown, ferrule, failure .

CAD/CAM Milled Glass Fiber Posts: Adaptation and Mechanical Behavior in Flared Root Canals

SUMMARY This study aimed to evaluate the cementation and mechanical behavior of flared root canals restored with CAD/CAM milled glass fiber post-and-core systems. Sixty-six endodontically treated human canines with a flared root canal were divided into three different groups according to the type of post: GPF received prefabricated posts; GREL received relined glass fiber posts, and GMILLED received CAD/CAM milled glass fiber posts. Cementation was performed with self-adhesive resin cement. The samples were submitted to x-ray microcomputed tomography analysis for the analysis of voids and gaps. The roots were sectioned and submitted to the push-out bond strength test. The load-to-fracture was evaluated in post-and-core systems. GMILLED presented lower void and lower gap volumes when compared to GPF and GREL. On the load-to-fracture test, GREL presented statistically significant higher values than GMILLED. GPF values had no statistically significant difference from the two other groups. On the push-out bond strength test, GPF presented statistically significant lower values when compared to GREL and GMILLED. The most common failure pattern was between dentin and cement in all groups. CAD/CAM milled glass fiber post-and-core systems presented an enhanced adaptation of glass fiber posts to flared root canal systems. Their results were comparable to relined posts in bond strength, while load-to-fracture-results for GMILLED were lower than those for GPF.

Better Glass-fiber Post Preservation in Teeth with Ferrule When Subjected to Chewing

SUMMARY Objectives: To evaluate the influence of ferrule effect and mechanical fatigue aging on glass-fiber post push-out bond strength (PBS) to root-canal dentin at different root thirds of premolars. Methods and Materials: Thirty-two sound maxillary premolar teeth were collected, and randomly assigned to two experimental groups (n=16): ‘Remaining Dentin Ferrule’ (RDF) = coronal crown cut 2.0 mm above the cemento-enamel junction (CEJ); ‘Without Dentin Ferrule’ (WDF) = coronal crown cut at the cemento-enamel junction. Teeth were endodontically treated, post spaces were prepared up to 10.0-mm depth from CEJ, and glass-fiber posts were cemented using a dual-cure self-adhesive composite cement. Standardized cores were built using a light-cure composite, upon which tooth cores were prepared using a 1.5-mm taper ogival-end diamond bur. Crowns were handmade using self-cure acrylic resin and cemented using the aforementioned composite cement. Half of the specimens were subjected to 1,200,000 cycles of mechanical fatigue in a chewing simulator (F = ‘Fatigue’), while the other half were stored in distilled water at 37°C for 1 week (C = ‘Control’). All specimens were horizontally sectioned into 1.0-mm thick slices prior to PBS test; the failure modes were assessed using stereomicroscopy and scanning electron microscopy (SEM). Data were analyzed for each root third using two-way analysis of variance (ANOVA) followed by Tukey HSD post-hoc test; frequency distribution was compared by Chi-square test (α=0.05) and post-hoc comparisons with Bonferroni. Results: The mean PBS in MPa (SD) were = RDF_F = 10.4 (2.9); WDF_F = 6.9 (1.7); RDF_C = 14.5 (2.7); WDF_C = 14.2 (2.9). Similar PBS were found for the root thirds. For all root thirds, significant differences were found for both the factors Dentin Ferrule and Fatigue, and their interaction (p<0.05). The lowest PBS was found for specimens without dentin ferrule subjected to chewing fatigue (p<0.001). Most failures occurred at the composite cement/dentin interface, followed by mixed and composite cement/glass-fiber post interfacial failures. There was a significant increase in mixed failures for the WDF_F group (p<0.001). Conclusion: Absence of 2.0-mm remaining dentin ferrule in premolars resulted in a higher decrease of the glass-fiber posts’ PBS to dentin after mechanical fatigue, irrespective of root third.

Stress Concentration of Endodontically Treated Molars Restored with Transfixed Glass Fiber Post: 3D-Finite Element Analysis

The loss of dental structure caused by endodontic treatment is responsible for a decrease in tooth resistance, which increases susceptibility to fracture. Therefore, it is important that minimally invasive treatments be performed to preserve the dental structure and increase the resistance to fracture of endodontically treated posterior teeth. To evaluate under axial loads, using the finite element method, the stress distribution in endodontically treated molars restored with both transfixed or vertical glass fiber posts (GFP) and resin composite. An endodontically treated molar 3D-model was analyzed using finite element analyses under four different conditions, class II resin composite (G1, control model), vertical glass fiber post (G2), transfixed glass fiber posts (G3) and vertical and transfixed glass fiber posts (G4). Ideal contacts were considered between restoration/resin composite and resin composite/tooth. An axial load (300 N) was applied to the occlusal surface. The resulting tensile stresses were calculated for the enamel and dentin tissue from five different viewports (occlusal, buccal, palatal, mesial and distal views). According to the stress maps, similar stress trends were observed, regardless of the glass fiber post treatment. In addition, for the G1 model (without GFP), a high-stress magnitude can be noticed in the proximal faces of enamel (7.7 to 14 MPa) and dentin (2.1 to 3.3 MPa) tissue. The use of transfixed glass fiber post is not indicated to reduce the stresses, under axial loads, in both enamel and dentin tissue in endodontically treated molar with a class II cavity.

Analysis of endodontic success using a Periapical Index in teeth with different types of intraradicular posts

This randomized clinical trial evaluated the influence of the type of intraradicular posts (glass fiber post or cast metal post) in the success of endodontic treatment in teeth that received single metal-ceramic restoration. The sample consisted of adult patients, who presented for the first time seeking routine dental care at the dental school over a period of 5 years. Seventy-six out of ninety-six teeth that received endodontic treatment and intraradicular post were analyzed, randomly distributed in two groups – glass fiber post (n=38), and cast metal post (n=38). The quality of the endodontic treatment was radiographically evaluated, and the apical status was assessed using the periapical index (PAI). Statistical Analyses were performed to a significance level of 5%. Descriptive analyses were used to characterize the teeth and survival curves were created using the Kaplan–Meier method. The success rate of endodontic treatment was 90.8% (n=69) including glass fiber post and cast post. When appropriate endodontic treatment was performed is possible to conclude that the success of endodontic treated teeth that received posts was not related to the post type.