scholarly journals Tadpole-Shaped POSS-Based Copolymers and the Aggregation Behavior at Air/Water Interface

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Lin Zhu ◽  
Fang Chen ◽  
Xiaoyan Ma ◽  
Xiu Qiang ◽  
Zhiguang Li ◽  
...  
Keyword(s):  
Thin Film ◽  
Block Copolymers ◽  
Surface Pressure ◽  
Self Assembly ◽  
Aggregation Behavior ◽  
Structure Evolution ◽  
Interfacial Rheology ◽  
Water Interface ◽  
Block Sequence ◽  
Air Water Interface

The aggregation behavior of three tadpole-shaped Polyhedral oligomeric silsesquioxane (POSS) based block copolymers using different blocks poly(methyl methacrylate) (PMMA) and poly(trifluoroethyl methacrylate) (PTFEMA) with different block sequence and ratio (POSS-PTFEMA161-b-PMMA236, POSS-PMMA277-b-PTFEMA130, and POSS-PMMA466-b-PTFEMA172) was investigated on the air-water interface. The interfacial rheology of three block copolymers was studied by surface pressure isotherm, compression modulus measurements, and compression and expansion hysteresis analysis on the Langmuir trough. The block sequence and ratio play a great role in self-assembly behavior at the interface. Based on surface pressure isotherm analysis, a thin film with low elasticity was achieved for the POSS-PTFEMA161-b-PMMA236. Moreover, for the block copolymer with same segment sequence (POSS-PMMA2-b-PTFEMA), the thin film compression capability is increased with increasing the PMMA ratio. The morphology of the deposited LB thin film was illustrated by atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). We observed that a thin film was composed by crater-shaped quasi-2D micelles for POSS-PTFEMA-b-PMMA, while it was proved that only flaky texture was observed for both POSS-PMMA277-b-PTFEMA130 and POSS-PMMA466-b-PTFEMA172. The thickness and area of flaky aggregates were greatly related to PMMA ratio. The different interface self-assembly structure evolution was proposed based on the interfacial rheology and thin film morphology studies.

scholarly journals Nanoparticle-Induced Self-Assembly of Block Copolymers into Nanoporous Films at the Air–Water Interface

ACS Nano ◽  
2020 ◽  
Vol 14 (9) ◽  
pp. 12203-12209
Author(s):  
Seulki Kang ◽  
Du Yeol Ryu ◽  
Emilie Ringe ◽  
Robert J. Hickey ◽  
So-Jung Park
Keyword(s):  
Block Copolymers ◽  
Self Assembly ◽  
Water Interface ◽  
Nanoporous Films ◽  
Air Water Interface

Biopolymer-Thin Film Interactions

1992 ◽  
Vol 292 ◽  
Author(s):  
K. M. Maloney ◽  
D. W. Grainger
Keyword(s):  
Thin Film ◽  
Fluorescence Microscopy ◽  
Self Assembly ◽  
Protein Docking ◽  
Lipid Monolayer ◽  
Protein Recognition ◽  
Lipid Monolayers ◽  
Water Interface ◽  
Air Water Interface

AbstractBiopolymer self assembly in heterogeneous lipid monolayers at the air-water interface was investigated. Fluorescence microscopy allowed the visualization of protein recognition and binding to these microstructured membranes. Mimicking proteininduced membrane microstructuring and protein docking was achieved in ternary mixed lipid monolayer systems.

Interfacial rheology and aggregation behaviour of amphiphilic CBABC-type pentablock copolymers at the air–water interface: effects of block ratio and chain length

RSC Advances ◽  
2015 ◽  
Vol 5 (101) ◽  
pp. 82869-82878 ◽  
Author(s):  
Zhiguang Li ◽  
Xiaoyan Ma ◽  
Duyang Zang ◽  
Xinghua Guan ◽  
Lin Zhu ◽  
...  
Keyword(s):  
Chain Length ◽  
Structure Evolution ◽  
Interfacial Rheology ◽  
Water Interface ◽  
Packing Model ◽  
Aggregation Behaviour ◽  
Air Water Interface ◽  
Pentablock Copolymers ◽  
Interface Effects

The interfacial rheology, aggregation behaviour and packing model of the structure evolution of three amphiphilic CBABC-type pentablock copolymers were investigated at the air–water interface.

Light‐Triggered, Non‐Centrosymmetric Self‐Assembly of Aqueous Arylazopyrazoles at the Air‐Water Interface and SHG Switching

2020 ◽  
Author(s):  
Nobuo Kimizuka ◽  
Yuki Nagai ◽  
Keita Ishiba ◽  
Ryosuke Yamamoto ◽  
Teppei Yamada ◽  
...  
Keyword(s):  
Self Assembly ◽  
Water Interface ◽  
Air Water Interface

scholarly journals Precise Synthesis and Thin Film Self-Assembly of PLLA-b-PS Bottlebrush Block Copolymers

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1412
Author(s):  
Eunkyung Ji ◽  
Cian Cummins ◽  
Guillaume Fleury
Keyword(s):  
Thin Film ◽  
Block Copolymers ◽  
Self Assembly ◽  
Ring Opening ◽  
Periodic Structures ◽  
One Pot ◽  
Ordered Structures ◽  
Carbonyl Chloride ◽  
Thin Film Patterning ◽  
Nanoporous Templates

The ability of bottlebrush block copolymers (BBCPs) to self-assemble into ordered large periodic structures could greatly expand the scope of photonic and membrane technologies. In this paper, we describe a two-step synthesis of poly(l-lactide)-b-polystyrene (PLLA-b-PS) BBCPs and their rapid thin-film self-assembly. PLLA chains were grown from exo-5-norbornene-2-methanol via ring-opening polymerization (ROP) of l-lactide to produce norbornene-terminated PLLA. Norbonene-terminated PS was prepared using anionic polymerization followed by a termination reaction with exo-5-norbornene-2-carbonyl chloride. PLLA-b-PS BBCPs were prepared from these two norbornenyl macromonomers by a one-pot sequential ring opening metathesis polymerization (ROMP). PLLA-b-PS BBCPs thin-films exhibited cylindrical and lamellar morphologies depending on the relative block volume fractions, with domain sizes of 46–58 nm and periodicities of 70–102 nm. Additionally, nanoporous templates were produced by the selective etching of PLLA blocks from ordered structures. The findings described in this work provide further insight into the controlled synthesis of BBCPs leading to various possible morphologies for applications requiring large periodicities. Moreover, the rapid thin film patterning strategy demonstrated (>5 min) highlights the advantages of using PLLA-b-PS BBCP materials beyond their linear BCP analogues in terms of both dimensions achievable and reduced processing time.

Sign in / Sign up

Export Citation Format

Share Document