scholarly journals Effect of Long-Wavelength Track Irregularities on Vehicle Dynamic Responses

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Tao Xin ◽  
Pengsong Wang ◽  
Yu Ding
Keyword(s):  
High Speed ◽  
Ride Comfort ◽  
Dynamic Responses ◽  
Vehicle Dynamic ◽  
Long Wavelength ◽  
High Speed Trains ◽  
Train Speed ◽  
Coupling Dynamic ◽  
Track Irregularities

Long-wavelength track irregularities have obvious influence on ride comfort and running stability of high-speed trains. Meanwhile, it brings risk to the inspection of track irregularities since ordinary inspection equipment has difficulties in covering long wavelengths. Previous research on the effect of long-wavelength track irregularities is rare. In order to find the relationship between long-wavelength irregularities and vehicle dynamic responses, a numerical vehicle-track coupling dynamic model based on multibody dynamics and finite element theories is established by using a self-compiling program. One case study is given as an example to show the methodology of determining the sensitive long wavelength and management amplitude of track longitudinal-level irregularities in high-speed railway. The simulation results show that the sensitive long wavelength has a strong correlation with train speed and natural frequency. The simulation and field test results are in good agreement.

Nonlinear Vibration and Comfort Analysis of High-Speed Trains Moving Over Railway Bridges

Volume 2 ◽  
2004 ◽  
Author(s):  
M. H. Kargarnovin ◽  
D. Younesian ◽  
D. J. Thompson ◽  
C. J. C. Jones
Keyword(s):  
High Speed ◽  
Ride Comfort ◽  
Beam Theory ◽  
Maximum Acceleration ◽  
Railway Bridges ◽  
Comfort Index ◽  
Power Spectral ◽  
High Speed Trains ◽  
Train Speed ◽  
Track Bridge

The ride comfort of high-speed trains passing over railway bridges is studied in this paper. The effects of some nonlinear parameters in a carriage-track-bridge system are investigated such as the load-stiffening characteristics of the rail-pad and the ballast, rubber elements in the primary and secondary suspensions systems. The influence of the track irregularity and train speed on two comfort indicators, namely Sperling’s comfort index and the maximum acceleration level, are also studied. Timoshenko beam theory is used for modelling the rail and bridge and two layers of parallel damped springs in conjunction with a layer of mass are used to model the rail-pads, sleepers and ballast. A randomly irregular vertical track profile is modelled, characterised by a power spectral density (PSD). The ‘roughness’ is generated for three classes of tracks. Nonlinear Hertz theory is used for modelling the wheel-rail contact.

Ride Quality of High-Speed Trains Traveling Over the Corrugated Rails

2006 ◽  
Author(s):  
H. Farahpour ◽  
D. Younesian ◽  
E. Esmailzadeh
Keyword(s):  
High Speed ◽  
Ride Comfort ◽  
The Body ◽  
Ride Quality ◽  
Comfort Index ◽  
Suspension Systems ◽  
Power Spectral ◽  
High Speed Trains ◽  
Train Speed ◽  
Secondary Suspension

Ride comfort of high-speed trains is studied using Sperling's comfort index. Dynamic model is developed in the frequency domain and the power spectral density (PSD) of the body acceleration is obtained for four classes of tracks. The obtained acceleration PSD is then filtered using Sperling's filter. The effects of the rail roughness and train speed on the comfort indicators are investigated. A parametric study is also carried out to evaluate the effects of the primary and secondary suspension systems on the comfort indicators.

EFFECT OF TRUCK COLLISION ON DYNAMIC RESPONSE OF TRAIN–BRIDGE SYSTEMS AND RUNNING SAFETY OF HIGH-SPEED TRAINS

2013 ◽  
Vol 13 (03) ◽  
pp. 1250064 ◽  
Author(s):  
CHAOYI XIA ◽  
HE XIA ◽  
NAN ZHANG ◽  
WEIWEI GUO
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Dynamic Responses ◽  
Illustrative Case ◽  
Analysis Model ◽  
Box Girders ◽  
Running Safety ◽  
High Speed Trains ◽  
Safety Indices

A dynamic analysis model is established for a coupled high-speed train and bridge system subjected to collision loads. A 5 × 32 m continuous high-speed railway bridge with PC box girders is considered in the illustrative case study. Entire histories of a CRH2 high-speed EMU train running on the bridge are simulated when the truck collision load acts on the bridge pier, from which the dynamic responses such as displacements and accelerations of the bridge, and the running safety indices such as derailment factors, offload factors and lateral wheel/rail forces of the train are computed. For the case study, the running safety indices of the train at different speeds on the bridge when its pier is subjected to a truck collision with different intensities are compared with the corresponding allowances of the Chinese Codes. The results show that the dynamic response of the bridge subjected to truck collision loads is much greater than the one without collision, which can drastically influence the running safety of high-speed trains.

Notch-based speed trajectory optimisation for high-speed railway automatic train operation

2021 ◽  
pp. 095440972110421
Author(s):  
Minling Feng ◽  
Chaoxian Wu ◽  
Shaofeng Lu ◽  
Yihui Wang
Keyword(s):  
High Speed ◽  
Applied Force ◽  
Mixed Integer ◽  
High Speed Railway ◽  
Train Operation ◽  
Train Speed ◽  
Automatic Train Operation ◽  
The Impact ◽  
Trajectory Optimisation

Automatic train operation (ATO) systems are fast becoming one of the key components of the intelligent high-speed railway (HSR). Designing an effective optimal speed trajectory for ATO is critical to guide the high-speed train (HST) to operate with high service quality in a more energy-efficient way. In many advanced HSR systems, the traction/braking systems would provide multiple notches to satisfy the traction/braking demands. This paper modelled the applied force as a controlled variable based on the selection of notch to realise a notch-based train speed trajectory optimisation model to be solved by mixed integer linear programming (MILP). A notch selection model with flexible vertical relaxation was proposed to allow the traction/braking efforts to change dynamically along with the selected notch by introducing a series of binary variables. Two case studies were proposed in this paper where Case study 1 was conducted to investigate the impact of the dynamic notch selection on train operations, and the optimal result indicates that the applied force can be flexibly adjusted corresponding to different notches following a similar operation sequence determined by optimal train control theory. Moreover, in addition to the maximum traction/braking notches and coasting, medium notches with appropriate vertical relaxation would be applied in accordance with the specific traction/braking demands to make the model feasible. In Case study 2, a comprehensive numerical example with the parameters of CRH380AL HST demonstrates the robustness of the model to deal with the varying speed limit and gradient in a real-world scenario. The notch-based model is able to obtain a more realistic optimal strategy containing dynamic notch selection and speed trajectory with an increase (1.622%) in energy consumption by comparing the results of the proposed model and the non-notch model.

Evaluation of the Ride Comfort for High Speed Trains in Korea

2006 ◽  
pp. 1589-1592 ◽  
Author(s):  
Young Guk Kim ◽  
Seog Won Kim ◽  
Chan Kyoung Park ◽  
Kyoung Ho Moon ◽  
Tae Won Park
Keyword(s):  
High Speed ◽  
Ride Comfort ◽  
High Speed Trains

Mapping relationship between dynamic responses of high-speed trains and additional bridge deformations

2020 ◽  
pp. 107754632093689
Author(s):  
Hongye Gou ◽  
Chang Liu ◽  
Hui Hua ◽  
Yi Bao ◽  
Qianhui Pu
Keyword(s):  
High Speed ◽  
Coupled Model ◽  
Dynamic Responses ◽  
High Speed Railway ◽  
Railway Bridges ◽  
Running Safety ◽  
High Speed Trains ◽  
Track Bridge ◽  
The Relationship ◽  
Track Deformation

Deformations of high-speed railways accumulate over time and affect the geometry of the track, thus affecting the running safety of trains. This article proposes a new method to map the relationship between dynamic responses of high-speed trains and additional bridge deformations. A train–track–bridge coupled model is established to determine relationship between the dynamic responses (e.g. accelerations and wheel–rail forces) of the high-speed trains and the track deformations caused by bridge pier settlement, girder end rotation, and girder camber. The dynamic responses are correlated with the track deformation. The mapping relationship between bridge deformations and running safety of trains is determined. To satisfy the requirements of safety and riding comfort, the suggested upper thresholds of pier settlement, girder end rotation, and girder camber are 22.6 mm, 0.92‰ rad, and 17.2 mm, respectively. This study provides a method that is convenient for engineers in evaluation and maintenance of high-speed railway bridges.

Sign in / Sign up

Export Citation Format

Share Document