scholarly journals Study on Energy Release of Surrounding Rock under the Multiple Unloading Disturbance during Tunnel Excavation

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Yong Fan ◽  
Junwei Zheng ◽  
Xinyi Hu ◽  
Xianze Cui ◽  
Weiping He
Keyword(s):  
Energy Release ◽  
Strain Energy ◽  
Dynamic Change ◽  
In Situ Stress ◽  
Surrounding Rock ◽  
Adjustment Process ◽  
Rock Masses ◽  
Blasting Excavation ◽  
Storage Limit

During excavation of deep rock, the release of strain energy plays an important role in geologic hazards caused by excavation. However, in the previous studies, the influence of transient unloading of in situ stress caused by blasting excavation has been ignored, and the blasting excavation of a tunnel is regarded as a single blast process. In this paper, the dynamic adjustment process of strain energy and the energy storage limit of surrounding rocks caused by transient unloading of in situ stress under elastic conditions were firstly analyzed. Then, the brittle-ductile-plastic transition model based on the Hoek–Brown strength criterion was simulated in FLAC3D. Finally, the dynamic release process of strain energy of surrounding rocks caused by multiple unloading disturbances was analyzed during the excavation of 2# Underground Laboratory of Jinping II Hydropower Station employing the newly proposed index, energy release coefficient (ERC). Results show that the strain energy of surrounding rock masses firstly decreases, then increases, next reduces, and finally stabilizes under the transient unloading of in situ stress. In the process of dynamic change of strain energy, when the strain energy exceeds its storage limit, a large amount of strain energy will be released and thus will lead to damage of the surrounding rock masses. Because the cut holes and the first circle of breaking holes are far away from the final excavation boundary, the unloading disturbance to the strain energy of surrounding rock masses is small. Furthermore, the energy release of surrounding rock masses is mainly caused by the unloading of the last circle of breaking holes and perimeter holes, and the closer to the final excavation boundary, the more intense the energy release.

scholarly journals Research on the escape mechanism and influencing factors of harmful gas induced by blasting excavation in deep rock tunnel

2021 ◽  
Author(s):  
Yi Luo ◽  
Hangli Gong ◽  
Dengxing Qu ◽  
Xinping Li ◽  
Shaohua Hu ◽  
...  
Keyword(s):  
Coupling Effect ◽  
In Situ Stress ◽  
Surrounding Rock ◽  
Water Soluble ◽  
Damage Effect ◽  
Escape Mechanism ◽  
Blasting Excavation ◽  
Deep Rock ◽  
Explosion Load

Abstract The escape of toxic and harmful gases is a common disaster effect in tunnel engineering. Frequent drilling and blasting excavation disturbances under high in-situ stress environment will inevitably lead to cumulative damage effect on surrounding rock, which will increase the permeability coefficient of surrounding rock, increase the risk of toxic and harmful gas escape, and seriously endanger construction safety. In this paper, based on real-time monitoring data of harmful gases during blasting and excavation of Yuelongmen Tunnel on Chengdu-Lanzhou Railway, this study summarized laws and distribution characteristics of harmful gas escape intensified by the blasting excavation, and the effectiveness of shotcreting and grouting for water blocking to inhibit gas escape is verified. Then, taking water-containing and gas-containing voids as carriers, considering the influence of different in-situ stress, explosion load and void parameters (including void pressure, void diameter and distance between void and tunnel), to carry out research on the escape mechanism of water-soluble (H 2 S) and insoluble (CH 4 ) toxic and harmful gases under the coupling effect of stress-seepage-damage. The relationship between the amount of harmful gas escaped and the damage degree of the surrounding rock of the tunnel is analyzed, and the functional relationship between it and the in-situ stress, explosion load and cave parameters is established. The results further demonstrate that the amount of escaped harmful gases, such as methane and H 2 S is closely related to lithology of surrounding rock, occurrence conditions of the deep rock mass, development degree of structural fractures and void parameters. The damage of surrounding rock caused by dynamic disturbance during blasting excavation is the main reason of aggravating harmful gas escape. The research results can provide a theoretical reference for preventing harmful gas from escaping in the similar engineering construction.

scholarly journals Development of a Model to Predict Vibrations Induced by Blasting Excavation of Deep Rock Masses under High In Situ Stress

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Yong Fan ◽  
Xianze Cui ◽  
Zhendong Leng ◽  
Yurong Zhou ◽  
Junwei Zheng ◽  
...  
Keyword(s):  
Prediction Model ◽  
In Situ Stress ◽  
Rock Masses ◽  
Vibration Data ◽  
High In Situ Stress ◽  
Dimension Analysis ◽  
Proposed Model ◽  
Blasting Excavation ◽  
Deep Rock

During the process of blasting excavation of deep rock masses under high in situ stress, energy produced by the explosive and the strain energy released by rock mass excavation constitute the energy source of vibration. However, in traditional Sadov’s empirical formula, the energy produced by explosive explosion is only considered which makes the error higher when it is used to predict the blasting-induced vibration peak under the condition of high in situ stress. In this study, energy transformation and distribution mechanisms caused by excavation of deep rock masses were analyzed at first. Then, a prediction model of vibration peak based on the principle of energy balance was established by dimension analysis. Finally, the proposed model was trained and tested with the vibration data monitored during the blasting excavation of deep buried tunnel in Jinping II hydropower station. The result shows that compared with the traditional prediction model, the proposed model has higher fitting correlation coefficient and lower root-mean-square error, which can be better applied to the prediction of vibration induced by blasting excavation of deep rock masses under high in situ stress.

scholarly journals Numerical Simulation of Blast Vibration and Crack Forming Effect of Rock-Anchored Beam Excavation in Deep Underground Caverns

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
XinPing Li ◽  
JunHong Huang ◽  
Yi Luo ◽  
Qian Dong ◽  
YouHua Li ◽  
...  
Keyword(s):  
Rock Mass ◽  
In Situ Stress ◽  
Surrounding Rock ◽  
Vibration Velocity ◽  
Blasting Vibration ◽  
Finite Element Software ◽  
Underground Cavern ◽  
Underground Caverns ◽  
Blasting Excavation

Aiming at surrounding rock damage induced by dynamic disturbance from blasting excavation of rock-anchored beam in rock mass at moderate or far distance in underground cavern, numerical model of different linear charging density and crustal stress in underground cavern is established by adopting dynamic finite element software based on borehole layout, charging, and rock parameter of the actual situation of a certain hydropower station. Through comparison in vibration velocity, contour surface of rock mass excavation, and the crushing extent of excavated rock mass between calculation result and field monitoring, optimum linear charging density of blast hole is determined. Studies are also conducted on rock mass vibration in moderate or far distance to blasting source, the damage of surrounding rock in near-field to blasting source, and crushing degree of excavated rock mass under various in situ stress conditions. Results indicate that, within certain range of in situ stress, the blasting vibration is independent of in situ stress, while when in situ stress is increasing above certain value, the blasting vibration velocity will be increasing and the damage of surrounding rock and the crushing degree of excavated rock mass will be decreasing.

Study on Deformation and Damage of Rock Mass Subject to High In Situ Stress by Using a Elastoplastic Damage Model and Considering the Impact of Weak Planes

2013 ◽  
Vol 838-841 ◽  
pp. 705-709
Author(s):  
Yun Hao Yang ◽  
Ren Kun Wang
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Damage Model ◽  
Back Analysis ◽  
In Situ Stress ◽  
Surrounding Rock ◽  
High In Situ Stress ◽  
Underground Caverns ◽  
The Impact

Large scale underground caverns are under construction in high in-situ stress field at Houziyan hydropower station. To investigate deformation and damage of surrounding rock mass, a elastoplastic orthotropic damage model capable of describing induced orthotropic damage and post-peak behavior of hard rock is used, together with a effective approach accounting for the presence of weak planes. Then a displacement based back analysis was conducted by using the measured deformation data from extensometers. The computed displacements are in good agreement with the measured ones at most of measurement points, which confirm the validities of constitutive model and numerical simulation model. The result of simulation shows that damage of surrounding rock mass is mainly dominated by the high in-situ stress rather than the weak planes and heavy damage occur at the cavern shoulders and side walls.

scholarly journals Study on In Situ Stress Measurement and Surrounding Rock Control Technology in Deep Mine

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Zhongcheng Qin ◽  
Bin Cao ◽  
Yongle Liu ◽  
Tan Li
Keyword(s):  
Stress Field ◽  
Principal Stress ◽  
Coal Mine ◽  
Maximum Principal Stress ◽  
In Situ Stress ◽  
Measured Data ◽  
Surrounding Rock ◽  
In Situ Stress Measurement ◽  
Surrounding Rock Control

In situ stress is the direct cause of roadway deformation and failure in the process of deep mining activities. The measured data of in situ stress in the Shuanghe coal mine show that the maximum principal stress is 44.94~50.61 MPa, and the maximum principal stress direction is near horizontal direction, which belongs to tectonic stress field. The maximum horizontal principal stress is 1.66~1.86 of the vertical stress. The horizontal principal stress controls the deep stress field. According to the measured data of in situ stress, the high-strength prestress bolt and cable collaborative support form is designed in the Shuanghe coal mine. Based on the stress field research of bolt and cable, the optimal prestress ratio of bolt and cable is proposed as 3. When the prestress ratio of bolt and cable is constant, the smaller the length ratio of bolt and cable is, the better the effect of prestressed field formed by cooperative support is. The results are applied to the support design of the mining roadway in the Shuanghe coal mine. Through the field monitoring test results, it is found that the maximum roof subsidence is 86 mm, the maximum floor deformation is 52 mm, and the maximum deformation of two sides is 125 mm. The surrounding rock control effect of the roadway is good, and the surrounding rock deformation conforms to the engineering technology standard requirements. The research results of this paper can provide some reference for the surrounding rock support of high ground stress mining roadway under similar conditions.

Sign in / Sign up

Export Citation Format

Share Document