Numerical Simulation of the Stability of Rock Mass around Large Underground Cavern

Geotechnical problems are complicated to the extent and cannot be expected in other areas since non-uniformities of existing discontinuous, pores in materials and various properties of the components. At present, it is extremely difficult to develop a program for tunnel analysis that considers all complicated factors. However, tunnel analysis has made remarkable growth for the past several years due to the development of numerical analysis method and computer development, given the situation that it was difficult to solve formula of elasticity, viscoelasticity, and plasticity for the dynamic feature of the ground when the constituent laws, yielding conditions of ground materials, geometrical shape and boundary conditions of the structure were simulated in the past. The stability of rock mass around an underground large cavern is the key to the construction of large-scale underground projects. In this paper, the stability analysis was carried out based on those parameters by using 2D FEM RS2 program. The calculated stress and displacements of surrounding rock and rock support by FEM analysis were compared with those allowable values. The pattern of deformation, stress state, and the distribution of plastic areas are analyzed. Finally, the whole stability of surrounding rock mass of underground caverns was evaluated by Rock Science - RS2 software. The calculated axial forces were far below design capacity of rock bolts. The strong rock mass strength and high horizontal to vertical stress ratio enhanced safe working conditions throughout the excavation period. Thus wide span caverns and the system of caverns could be stability excavated sedimentary rock during the underground cavern and the system of caverns excavation by blasting method. The new method provides a reliable way to analyze the stability of the caverns and the system of caverns and also will help to design or optimize the subsequent support. Doi: 10.28991/CEJ-2022-08-01-06 Full Text: PDF

Effects of External Dynamic Disturbances And Structural Plane On Rock Fracturing Around Deep Underground Cavern

The occurrence of disasters in deep mining engineering has been confirmed to be closely related to the external dynamic disturbances and geological discontinuities. Thus, a combined finite-element approach was employed to simulate the failure process of an underground cavern, which provided insights into the failure mechanism of deep hard rock affected by factors such as the dynamic stress-wave amplitudes, disturbance direction, and dip angles of the structural plane. The crack-propagation process, stress-field distribution, displacement, velocity of failed rock, and failure zone around the circular cavern were analyzed to identify the dynamic response and failure properties of the underground structures. The simulation results indicated that the dynamic disturbance direction had less influence on the dynamic response for the constant in situ stress state, while the failure intensity and damage range around the cavern always exhibited a monotonically increasing trend with an increase in the dynamic load (stress-wave amplitudes). The crack distribution around the circular cavern exhibited an asymmetric pattern, possibly owing to the stress-wave reflection behavior and attenuation effect along the propagation route. Geological discontinuities significantly affected the stability of nearby caverns subjected to dynamic disturbances, during which the failure intensity exhibited the pattern of an initial increase followed by a decrease with an increase in the dip angle of the structural plane. Additionally, the dynamic disturbance direction led to variations in the crack distribution for specific structural planes and stress states. These results indicate that the failure behavior should be the integrated response of the excavation unloading effect, geological conditions, and external dynamic disturbances.